Analisis produktivitas produced water pump menggunakan metode OEE dan FMEA
DOI:
https://doi.org/10.31004/jutin.v8i1.41289Keywords:
productivity, Overall Equipment Effectiveness (OEE), FMEAAbstract
Produced Water is water that is produced from wells along with oil during the production process. Produced water contains soluble and insoluble oil/organics, dissolved solids, and various chemicals used in the production process. The Produced Water Pump functions to push water from the tank to the injection well which is flowed through pipes. The purpose of this study is to determine the productivity of the product water pump using the Overall Equipment Effectiveness (OEE) method which obtained the results at a performance value of 82% where this value did not reach the maximum OEE standard so that further action will be taken immediately in order to get improvements using the Failure Mode and Effect Analysis (FMEA) method with proposed improvements Providing additional training on the importance of routine maintenance and the impact of negligence, Implementing an objective performance appraisal system, Asking workers to make reports after completing maintenance tasks so that workers can find out the history of previous machine maintenance.References
Fifi Izzati, Riska Laksmita Sari, A. R. S. (2022). EVALUASI PENGARUH LAJU ALIR POMPA INJEKSI TERHADAP TEKANAN POMPA INJEKSI PADA STASIUN PENGUMPUL UTAMA B JATIBARANG FIELD, Jurnal Natural, 10(1), 1-52. Jurnal Natural, 10(1), 1–52. https://doi.org/10.21608/pshj.2022.250026
Masri, W. S., Junus, S., & Uloli, H. (2023). Analisis Penyebab Kerusakan Pada Mesin Press (200a-3 Oil Expeller) Menggunakan Metode Fmea Di Pt. Xyz. Jambura Industrial Review (JIREV), 3(2), 01–09. https://doi.org/10.37905/jirev.v3i2.23036
Sri, W. (2018). Pengaruh Lingkungan Kerja Terhadap Produktivitas Kerja Karyawan. Jurnal Manajemen, 3(2), 1–5.
Santoso, R., Lahay, I. H., Junus, S., & Lapai, Y. (2021). Optimalisasi Perawatan Mesin Press dengan Metode Failure Mode Effect Analysis (FMEA). Jambura Industrial Review (JIREV), 1(1), 1–6. https://doi.org/10.37905/jirev.1.1.1-6
Wahid, A. (2020). Penerapan Total Productive Maintenance (TPM) Produksi Dengan Metode Overall Equipment Effectiveness (OEE) Pada Proses Produksi Botol (PT. XY Pandaan – Pasuruan). Jurnal Teknologi Dan Manajemen Industri, 6(1), 12–16. https://doi.org/10.36040/jtmi.v6i1.2624
Wibisono, D. (2021). Analisis Overall Equipment Effectiveness (OEE) Dalam Meminimalisasi Six Big Losses Pada Mesin Bubut (Studi Kasus di Pabrik Parts PT XYZ). Jurnal Optimasi Teknik Industri (JOTI), 3(1), 7–13. https://doi.org/10.30998/joti.v3i1.6130
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Andi Ratu Felisah, Hendra Uloli, Idham Halid Lahay
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
