A Analisis Produktivitas Menggunakan Objective Matrix (OMAX) pada lantai produksi Sigaret Kretek Mesin (SKM) PT. Nikorama Citra Tobacco

Authors

  • Muhamad Nur Fiqih Universitas Dian Nuswantoro
  • Safarudin Ramdhani Universitas Dian Nuswantoro

DOI:

https://doi.org/10.31004/jutin.v7i4.36685

Keywords:

Objective matrix (OMAX), Productivity, Criteria, Ratio

Abstract

This study is centered on calculating the productivity of the SKM (rolled kretek cigarette) production floor work station of PT. Nikorama Citra Tobacco from 22 January 2024 to 29 February 2024 which aims to measure the level of productivity in the cigarette production process on the SKM production floor, identify key elements that have the greatest impact on the level of productivity achieved, and propose or recommend improvement steps to increase productivity in the production process on the SKM production floor. This research utilizes the objective matrix method (OMAX) by measuring two elements of productivity, namely the element of efficiency and the element of effectiveness. From these two elements of productivity, six measurement ratios are obtained, labor ratio, production output ratio, working hours ratio, defective product ratio, production time ratio. , engine ratio. The results of this research show that the productivity results of the SKM production floor fluctuate up and down due to the instability of the productivity ratio performance value where the highest productivity occurs on February 22 2024 and the worst productivity on January 22 2024, while the best ratio value occurs in the yield ratio. production and worst ratio values ??on machine ratios. The worst ratio value occurs in the machine ratio so improvements need to be made so that the productivity value can be more optimal.

References

Damayanti, P., Wibowo, H., & Sidiq, A. (2021). USULAN PERBAIKAN UNTUK MENINGKATKAN PRODUKTIVITAS BERDASARKAN HASIL ANALISIS PENGUKURAN OBJECTIVE MATRIX (OMAX). JUTI UNISI, 5(2).

Fajar Triawan, D. F. T., & Andung Jati Nugroho. (2023). PENGUKURAN PRODUKTIVITAS LANTAI PRODUKSI MENGGUNAKAN METODE OBJECTIVE MATRIX (OMAX) DAN FAULT TREE ANALISIS (FTA). Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 3(2).

Fiqih Fadaillah Ramadhan, & Andung Jati Nugroho. (2023). PENGUKURAN PRODUKTIVITAS BETON READY MIX DENGAN METODE OMAX (OBJECTIVE MATRIX). Jurnal Ilmiah Teknik Mesin, Elektro Dan Komputer, 3(2).

Fradinata, E., Marsella, B., & Izzaty, N. (2022). Pengukuran Produktivitas dengan Menggunakan Metode Objective Matrix pada Proses Produksi UD. Kopi Teungku Aceh. Jurnal Serambi Engineering, 7(3).

Hardiantara, Y., Kusmindari, C. D., & Zahri, A. (2019). ANALISIS PRODUKTIVITAS PEMBANGKIT LISTRIK TENAGA GAS DENGAN METODE OBJECTIVE MATRIX (OMAX) (Studi Kasus?: PT SA ARY INDORAYA). Jurnal Tekno, 16(1), 17–37.

Huda, M. (2023). ANALISA PRODUKTIVITAS PADA DIVISI PRODUKSI BUKU PT XYZ MENGGUNAKAN METODE OBJECTIVE MATRIX (OMAX) DAN FUZZY ANALYTIC HIERARCHY PROCES (FAHP). SENTRI: Jurnal Riset Ilmiah, 2(7).

Kurnia R, A., & Lutfiani, B. (2023). Pengukuran Produktivitas Dengan Menggunakan Model Omax( Objective Matriks ) Sebagai Bahan Evaluasi Usaha Peningkatan Produktivitas Di “Cv. Mkb” Kabupaten Tuban. Jurnal Ekonomi, Teknologi Dan Bisnis (JETBIS), 2(2).

Novita Sari, E. K., Hermanuadi, D., & Brilliantina, A. (2022). Analisis Pindah Panas pada Pengeringan Kulit Biji Kopi (Cascara) dengan Mengunakan Mesin Pengering Tipe Flash Dryer_Cum UV. Jurnal Teknologi Pangan Dan Hasil Pertanian, 17(1).

Pratama, D. A., & Nugroho, A. J. (2023). ANALISIS PPRODUKTIVITAS PRODUK KOMPOR BATIK MENGGUNAKAN METODE OBJECTIVE MATRIX (OMAX) (STUDI KASUS PADA CV ASTOETIK INDONESIA). SENTRI: Jurnal Riset Ilmiah, 2(9).

Rahmawati, W., & Wahyudin, M. (2023). Productivity Analysis on Black Tea Processing Process Using Objective Matrix (OMAX) Method at PT Perkebunan Nusantara VIII Kebun Pasirmalang. Agroindustrial Journal, 9(2).

Wahyuni, H. C., & Setiawan, S. (2017). Implementasi Metode Objective Matrix (OMAX) Untuk Pengukuran Produktivitas Pada PT.ABC. PROZIMA (Productivity, Optimization and Manufacturing System Engineering), 1(1).

Zalukhu, W. G., Kristina Dora Yunita, M. Akbarul Mukalimin, & Ari Zaqi Al Faritsy. (2024). Analisis Produktivitas Produk Tempe Menggunakan Metode Obejective Matrix (OMAX). Jurnal Teknologi Dan Manajemen Industri Terapan, 3(I).

Downloads

Published

2024-10-15

How to Cite

Fiqih, M. N. ., & Ramdhani, S. . (2024). A Analisis Produktivitas Menggunakan Objective Matrix (OMAX) pada lantai produksi Sigaret Kretek Mesin (SKM) PT. Nikorama Citra Tobacco. Jurnal Teknik Industri Terintegrasi (JUTIN), 7(4), 2441–2449. https://doi.org/10.31004/jutin.v7i4.36685

Issue

Section

Articles of Research

Most read articles by the same author(s)