Analisa Efektifitas Mesin Palletizer Menggunakan Metode OEE Dan Identifikasi Kegagalan Dengan FMEA
DOI:
https://doi.org/10.31004/jutin.v8i3.47848Keywords:
OEE, FMEA, Six Big Losses, Downtime, Palletizer MachineAbstract
This study aims to evaluate the effectiveness of the palletizer machine at PT XYZ using the Overall Equipment Effectiveness (OEE) method and to identify the main causes of failure through the Failure Mode and Effect Analysis (FMEA) approach. OEE measurement includes three key parameters: availability, performance rate, and quality rate. The results show that the OEE value ranges between 91%–93%, which exceeds the JIPM standard of 85%, but has yet to consistently meet the company's production target of 91%. The Six Big Losses analysis revealed that the highest loss was due to equipment failure, accounting for 1.7%, with the palletizer contributing 55% of the total technical downtime. FMEA identified three critical components with the highest Risk Priority Numbers (RPN): the push box motor, sliding motor, and hydraulic oil pump. Root causes were further explored using a fishbone diagram.References
Anggrayna, N. D. (2023). Analisis Usulan Perencanaan Perawatan Mesin Pada Line Produksi Cup 220 Ml Dengan Metode Reliability Centered Maintenance (Rcm) Pada Mesin Sealer (Studi Kasus: Pt. Tujuh Sumber Berkah). Universitas Islam Indonesia.
Aristriyana, E., & Fauzi, R. A. (2022). Analisis Penyebab Kecacatan Produk Dengan Metode Fishbone Diagram Dan Failure Mode Effect Analysis (Fmea) Pada Perusahaan Elang Mas Sindang Kasih Ciamis. Jurnal Industrial Galuh, 4(2), 75–85.
Chaurey, S., Kalpande, S. D., Gupta, R. C., & Toke, L. K. (2023). A Review On The Identification Of Total Productive Maintenance Critical Success Factors For Effective Implementation In The Manufacturing Sector. Journal Of Quality In Maintenance Engineering, 29(1), 114–135.
Fitriana, R., Sari, D. K., & Habyba, A. N. (2021). Pengendalian Dan Penjaminan Mutu. Wawasan Ilmu.
Hardiatama, I., Yudah, N. A. E. P., Sidartawan, R., Basuki, H. A., & Kristianta, F. X. (2022). Analisis Perawatan Cutter Section Dredger Dengan Metode Fmea Dan Oee. Jurnal Mekanova: Mekanikal, Inovasi Dan Teknologi, 8(1), 62–72.
Hasanudin, M. (2020). Analisis Penerapan Total Productive Maintenance (Tpm) Menggunakan Overall Equipment Effectiveness (Oee) Dan Fuzzy Fmea Pada Mesin Extruder Di Pt Xyz Bogor. Sijie Scientific Journal Of Industrial Engineering, 1(2), 53–58.
Nuriyanto, Wahid, A., Munir, M., Misbah, A., & Pusakaningwati, A. (2022). Pengukuran Efektifitas Mesin Chenyueh Menggunakan Pendekatan Overall Equipment Effectiveness (Oee) Dan Six Big Losses Pada Cv. Aabi Surabaya. Journal Of Industrial View, 4(1), 31–40. Https://Doi.Org/10.26905/Jiv.V4i1.7680
Nuriyanto. (2024). Analisis Pengendalian Kualitas Menggunakan Metode Failure Mode And Effect Analysis. Procedia Of Engineering And Life Science, 7(11), 37–42.
Purba, L. A. (2022). Perencanaan Perawatan Dan Penjadwalan Pada Mesin Spindleless Venerr Dengan Metode Reliability Centered Maintenance (Rcm)(Studi Kasus: Pt. Utama Core Albasia). Universitas Islam Sultan Agung.
Purwanto, C., & Jaqin, C. (2021). Improving Curing Process Productivity In The Tire Industry Using Oee, Tpm And Fmea Methods. Proceedings Of The International Conference On Industrial Engineering And Operations Management, Figure 1, 6709–6715. Https://Doi.Org/10.46254/An11.20211152
Puspitaloka, M. A. C. D. (2022). Analisis Perbaikan Kualitas Proses Produksi Di Pt. Xyz Dengan Menggunakan Metode Fuzzy Fmea. Universitas Ma Chung.
Putri, S. W., Momon, A., Wahyudin, W., & Fikri, S. (2022). Analisis Efektivitas Mesin Injection 2500 Ton Di Bagian Produksi Pt. Xyz Menggunakan Metode Overall Equipment Effectiveness. J. Serambi Eng, 7(4), 4195–4200.
Ramdani, L. M., & Al Faritsy, A. Z. (2022). Analisis Pengendalian Kualitas Pada Produksi Base Plate R-54 Menggunakan Metode Statistical Quality Control Dan 5s. Jurnal Teknologi Dan Manajemen Industri Terapan, 1(2), 85–97.
Rizki, S. (2024). Analisis Pengendalian Mutu Produk Teh Pucuk Harum Pada Pt. Tirta Fresindo Jaya.
Santosa, F. A. (2024). Analisis Pengandalian Kualitas Dengan Metode Failure Mode And Effect Analysis (Fmea) Dan Problem Identification And Corrective Action (Pica) Pada Bagian Spray Flowcoater (Studi Kasus: Departemen Painting, Pt. Yamaha Indonesia). Universitas Islam Indonesia.
Sukma, D. I., Prabowo, H. A., Setiawan, I., Kurnia, H., & Fahturizal, I. M. (2022). Implementation Of Total Productive Maintenance To Improve Overall Equipment Effectiveness Of Linear Accelerator Synergy Platform Cancer Therapy. International Journal Of Engineering, Transactions A: Basics, 35(7), 1246–1256. Https://Doi.Org/10.5829/Ije.2022.35.07a.04
Syarifuddin, A., & Misbah, A. (2023). Analysis Of Quality Control Of Defects In 500 Ml Plastic Bottle Products Using Fault Tree Analysis And Fmea Methods At Pt. Berlina Tbk Pandaan. Jurnal Sains Dan Teknologi Industri, 21(1), 131. Https://Doi.Org/10.24014/Sitekin.V21i1.24827
Tammya, E., & Herwanto, D. (2021). Analisis Efektivitas Mesin Debarker Dengan Menggunakan Metode Overall Equipment Effectiveness (Oee) Di Pt. Xyz Kuningan, Jawa Barat. Sitekin: Jurnal Sains, Teknologi Dan Industri, 19(1), 20–27.
Wahid, E. A. (2022). Perbandingan Model Predictive Maintenance Dengan Pendekatan Machine Learning Menggunakan Data Operasional Pabrik Semen (Studi Kasus Pt Xyz). Institut Teknologi Sepuluh Nopember.
Widjaya, O. T., & Asy’ari, S. (2023). Efektifitas Mesin Sbo-14 Line 5 Menggunakan Metode Overall Equipment Effectiveness Pt. Tirta Investama Pandaan. Jci Jurnal Cakrawala Ilmiah, 3(1), 83–94. Http://Bajangjournal.Com/Index.Php/Jci
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Junaidi Suprapto, Nuriyanto Nuriyanto
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
