Pengukuran kerja dengan metode work sampling di Kasir Minimarket Kenjeran UD. XYX

Authors

  • I Gusti Ayu Sri Deviyanti Program Studi Teknik Industri, Institut Sains & Teknologi Terpadu Surabaya
  • Nyoman Sri Widari Program Studi Teknik Industri, Fakultas Teknik, Universitas Katolik Dharma Cendika
  • Moh Ainul Fais Universitas W R Supratman

DOI:

https://doi.org/10.31004/jutin.v8i1.38323

Keywords:

Cashier, idle time, minimarket, Work efficiency, work sampling

Abstract

The operational efficiency of minimarkets is highly dependent on the performance of cashiers, who often face the challenges of idle time and workload fluctuations. This study aims to analyze the work efficiency of the cashiers of Kenjeran Minimarket UD. XYX using the work sampling method. Observations were conducted for 10 days with a confidence level of 95% and a level of accuracy of 5%. The results show an average active working time of 90%, with idle time of around 10%. Certain days reach a maximum efficiency of 96.7%, while other days record the lowest efficiency of 80%. These fluctuations remain within the limits of statistical control, indicating the consistency of the cashier's work. To improve efficiency, optimization of work schedules, additional training, and the use of automated technology are recommended. This study shows that work sampling is effective in identifying idle time and designing performance improvement strategies

References

Munandar, A. S. (2023). Tasawuf Sebagai Kemajuan Peradaban: Studi Perkembangan Sosial Dan Ekonomi Tarekat Idrisyyiah Di Tasikmalaya. Jurnal Multikultural & Multireligius, 22(1), 208–233. https://doi.org/10.32488/harmoni.v22i1.677

Cahyaningrum, D. T., Siswanto, N., & Firmanto, H. (2021). Penentuan Tenaga Kerja Optimal pada Packaging Kopi dengan Menggunakan Analisis Beban Kerja Metode Work Sampling. Jurnal Ilmiah INOVASI, 21(1), 46–49.

Choerudin, A., Zulfachry, Widyaswati, R., Warpindyastuti, L. D., Khasanah, J. S. N., Harto, B., Oktaviani, N. F., Sohilauw, M. I., Nugroho, L., & Paramita, V. S. (2023). Literasi Keuangan (D. P. Sari, Ed.). PT GLOBAL EKSEKUTIF TEKNOLOGI. https://doi.org/9786231983794

Deviyanti, I. G. A. S., Fais, M. A., Prihartanti, W., Purwoko, B., & Rahmanto, A. (2024). Pengukuran Kerja Dengan Metode Work Sampling di SPBU Pertamina Jemursari. J. Riset Teknik, 2024(3), 255–263. https://doi.org/10.54980/jer.v

Ekowati, D., & Subekti, I. (2022). Analisis Beban Kerja dan Kebutuhan Tenaga Pramubakti Dengan Metode Work Sampling dan Metode Workload Indicator Staff Needes. Kajian Ekonomi Dan Bisnis, 17(1), 31–44. https://doi.org/10.51277/keb.v17i1.116

Kristina, S., Setiawati, M., & Sebastian, S. (2021). Analisis Kualitas Pelayanan Minimarket Indomaret di Bandung untuk Meningkatkan Kepuasan Pelanggan. Seminar Nasional Teknik Dan Manajemen Industri Dan Call for Paper (SENTEKMI 2021), 1, 270–279. https://doi.org/10.28932/sentekmi2021.v1i1.25

Masniar, & Asmuruf, S. (2021). Analisis Uji Petik Kerja (Work Sampling) Pada Proses Produksi Keripik Keladi Karmila Di Kota Sorong. Metode Jurnal Teknik Industri, 7(1), 42–49. https://doi.org/10.33506/mt.v7i1.1650

Panggabean, T. A. M., Harahap, U. N., & Utama, D. W. (2024). Optimalisasi Performance Operator Service Sepeda Motor Dengan Menggunakan Metode Work Sampling Pada UMKM Giant Jaya Motor. IRA Jurnal Teknik Mesin Dan Aplikasinya (IRAJTMA), 3(1), 47–56. https://doi.org/10.56862/irajtma.v3i1.91

Setyani, E., Octwelfth, F. E., & Ranti, G. (2024). Mekanisme Operasional Minimarket Dalam Mengelola Pembatalan Transaksi. Jurnal Kewarganegaraan, 8(1), 839–844. https://doi.org/10.31316/jk.v8i1.6411

Soeharso, S. Y., & Tripomo, T. (2020). SOFT COMPETENCIES INDUSTRY 4.0: Strategi Menyiapkan SDM Unggul di Era Disrupsi (C. Mitak, Ed.). CV ANDI OFFSET.

Sophia, & Sangadji, E. M. (2022). Salesmanship (kepenjualan) (M. A. Liane & Suryani, Eds.). Bumi Aksara.

Neneng, S. I., & Zega, A. (2024). Analisis kepuasan pelanggan dalam memilih minimarket di Kecamatan Sipora Utara. JUKONI: Jurnal Ilmu Ekonomi Dan Bisnis, 1(1), 1–7.

Yudisha, N. (2021). Perhitungan waktu baku menggunakan metode Jam Henti pada proses Bottling. Jurnal VORTEKS, 2(2), 85–90. https://doi.org/10.54123/vorteks.v2i2.73

Downloads

Published

2025-01-13

How to Cite

Deviyanti , I. G. A. S., Widari, N. S., & Fais, M. A. (2025). Pengukuran kerja dengan metode work sampling di Kasir Minimarket Kenjeran UD. XYX. Jurnal Teknik Industri Terintegrasi (JUTIN), 8(1), 492–500. https://doi.org/10.31004/jutin.v8i1.38323

Issue

Section

Articles of Research

Similar Articles

1 2 3 4 5 6 7 8 > >> 

You may also start an advanced similarity search for this article.