Optimasi Metode Kerja Line Packing pada Mesin Filling Multiline 6 di PT XYZ dengan Metode DMAIC
DOI:
https://doi.org/10.31004/jutin.v8i2.43983Keywords:
DMAIC, Optimization, Productivity, Cost Savings, Work EfficiencyAbstract
Optimization of work methods is a key step to improving operational efficiency, particularly in the manufacturing industry which faces high cost pressures. This research was conducted at PT XYZ, a company specializing in processing cooking spices and sauces, located in the strategic industrial area of Jababeka, Cikarang. The study focused on the packing line of the filling machine ML6 with the aim of identifying, analyzing, and optimizing work methods using the DMAIC (Define, Measure, Analyze, Improve, Control) approach. The results showed that implementing the DMAIC method successfully reduced idle time, balanced the workload among operators, and increased packing line productivity. These improvements led to annual cost savings of Rp244,674,216 and a workforce efficiency increase of 25%. Thus, the DMAIC approach has proven effective in addressing operational problems and significantly contributes to cost reduction as well as increased production process efficiencyReferences
Dewi, M. B. K. (2019). Analisis Dampak Permintaan Naiknya Upah Minimum Terhadap Perekonomian, Hukum Dan Kesejahteraan Nasional. Indonesian State Law Review (ISLRev), 2(1), 3017–3321. https://doi.org/10.15294/islrev.v2i1.38447
Hisprastin, Y., & Musfiroh, I. (2020). Ishikawa Diagram dan Failure Mode Effect Analysis (FMEA) sebagai Metode yang Sering Digunakan dalam Manajemen Risiko Mutu di Industri. Majalah Farmasetika, 6(1), 1. https://doi.org/10.24198/mfarmasetika.v6i1.27106
Nugroho, I., Anas, A., Agung, N., & Prastyo, Y. (2024). Evaluasi Penerapan Metode DMAIC dalam Industri Manufaktur : Kajian Literatur Pendahuluan. 02(06), 201–219.
Oktavia, C. W., Suprata, F., Sutomo, & Prasetya, W. (2018). Sosialisasi perbaikan metode kerja untuk menghindari terjadinya low back pain dan meningkatkan produktivitas kerja pada pangkalan elpiji puskop bintara. Jurnal Pengabdian Kepada Masyarakat MADANI, 4(2), 92–96.
Oktaviani, R., Rachman, H., Zulfikar, M. R., & Fauzi, M. (2022). Pengendalian Kualitas Produk Sachet Minuman Serbuk Menggunakan Metode Six Sigma Dmaic. Jurnal Ilmiah Teknik Dan Manajemen Industri, 2(1), 122–130. https://doi.org/10.46306/tgc.v2i1.31
Pakpahan, W., Rahayu, S., & Fatchan, M. (2024). Analisis Efektivitas Mesin Inspeksi Botol Kaca Dengan Penerapan Total Productive Maintenance Menggunakan Pendekatan Overall Equipment Effectiveness di PT . XYZ Abstrak. 6(July), 159–169.
Rahmawati, S., Zuhri, S., & Arifin, R. (2023). Analisis Aliran Proses Dan Pengukuran Waktu Kerja Pada Proses Produksi Hospital Equipment: Studi Kasus. Jurnal Kesehatan Tambusai, 4(1), 220–231.
Septiawan, T., Permad, R., & Praseyo, Y. (2024). Menganalisis penyebab produk NG (not good) pada PT XYZ dengan metode DMAIC. Journal of Comprehensive Science, 3(1), 37–48.
Sumasto, F., Satria, P., & Rusmiati, E. (2022). Implementasi Pendekatan DMAIC untuk Quality Improvement pada Industri Manufaktur Kereta Api. Jurnal INTECH Teknik Industri Universitas Serang Raya, 8(2), 161–170. https://doi.org/10.30656/intech.v8i2.4734
Terawati, S., & Wiguna, W. (2021). Implementasi Metode DMAIC Untuk Menurunkan Cacat Bonding Sepatu di Gedung 2 pada PT. Parkland World Indonesia. National Conference on Applied Business, Education, & Technology (NCABET), 2(1), 431–441.
Utami, S. F., Muhamad Faiz Almatsir, Ismi Mashabai, & Nurul Hudaningsih. (2023). The analysis of arabica coffee quality in matano coffee using the six sigma DMAIC method. JENIUS : Jurnal Terapan Teknik Industri, 4(2), 212–226. https://doi.org/10.37373/jenius.v4i2.570
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Irvan Nugroho, Muhklisin Muhklisin, Siti Rahayu
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
