Perancangan dan Pemanfaatan Limbah Oli Bekas Sebagai Sumber Alternatif pada Kompor
DOI:
https://doi.org/10.31004/jutin.v9i1.53974Keywords:
Used oil stove, Alternaive energy, Design for Asesembly (DFA), Environmental pollutionAbstract
The energy crisis and increasing environmental pollution due to used oil waste encourage the need to develop innovative alternative energy, especially in remote areas where it is difficult to access conventional fuel. This research aims to design a stove fueled by used oil as an alternative energy source that is environmentally friendly and economical. The stove design was carried out using AutoCAD software with a Design for Assembly (DFA) approach to produce a design that was efficient and easy to assemble. Test results show that the stove is capable of reaching combustion temperatures between 570–600°C with an average thermal efficiency of 5.1%. From an economic aspect, using this stove can save household energy costs by up to 30% with relatively low production costs. Apart from that, using used oil as fuel can reduce CO₂ emissions by up to 90% and reduce the potential for environmental pollution. A case study in Kiloma Village, Banggai Regency, Central Sulawesi, shows that this technology can be accepted and used effectively by the community.References
Agency, I. E. (2021). World Energy Outlook 2021. IEA.
Change, I. P. on C. (2021). Climate Change 2021: The Physical Science Basis. Cambridge University Press.
Demirbas, A. (2009). Progress and recent trends in biodiesel fuels. Energy Conversion and Management, 50(1), 14–34.
Indonesia, K. E. dan S. D. M. R. (2020). Statistik Energi Indonesia 2020. Kementerian ESDM Republik Indonesia.
Indonesia, K. L. H. dan K. R. (2020). Status Lingkungan Hidup Indonesia 2020. KLHK Republik Indonesia.
Kusnadi, K., Prasetyo, E., & Hidayat, R. (2020). Rancang bangun dan uji kinerja kompor berbahan bakar oli bekas sebagai energi alternatif. Jurnal Teknik Mesin, 12(2), 85–92.
Pratama, R., Nugroho, S., & Hidayat, M. (2020). Pengaruh sistem pemanasan awal dan pengaturan aliran udara terhadap efisiensi pembakaran kompor berbahan bakar oli bekas. Jurnal Rekayasa Energi Dan Lingkungan, 8(2), 101–109.
Putra, A. D., & Siregar, R. (2019). Pemanfaatan oli bekas sebagai bahan bakar alternatif ramah lingkungan. Jurnal Energi Dan Manufaktur, 6(1), 45–52.
Rahmadani, R., Putra, A. R., & Sari, D. P. (2023). Analisis emisi gas buang dan kinerja kompor berbahan bakar oli bekas sebagai energi alternatif ramah lingkungan. Jurnal Teknik Lingkungan, 29(2), 85–94.
Suryadi, A., & Pratama, R. (2022). Penerapan teknologi tepat guna kompor berbahan bakar oli bekas untuk peningkatan efisiensi energi rumah tangga di Desa Malinau Kota [Institut Teknologi dan Bisnis Ahmad Dahlan]. https://repository.itb-ad.ac.id/
Sutanto, D., & Prasetyo, A. (2020). Analisis kandungan logam berat pada oli bekas dan dampaknya terhadap pencemaran tanah dan air. Jurnal Pengelolaan Dan Pemanfaatan Limbah, 4(2), 75–83. https://ejournal.pnc.ac.id/index.php/jppl
West, R. (2021). The environmental impact of used oil and the importance of proper management. https://recyclewest.ca/the-environmental-impact-of-used-oil-how-proper-collection-and-recycling-makes-a-difference/
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Renita Cahyani, Adisti Meysila, Danny Purnomo, Jerry Moses Libun, Rizal Huda, Gafur Ambado, Moh Rafli Panjili
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
