Rancang Bangun Egrek Sentak Manual
DOI:
https://doi.org/10.31004/jutin.v8i2.44805Keywords:
Design and devolopment, Egrek, Fresh fruit bunchesAbstract
Palm oil is an industrial/plantation plant that is useful as a producer of cooking oil, industrial oil and fuel. In the world, Indonesia is the largest country that produces palm oil. Most of the harvesters of fresh fruit bunches (FFB) and oil palm fronds still use manual methods with egrek and dodos harvesting tools. Using a manual egrek requires quite a lot of energy and a long time in the harvesting process, therefore a tool is needed that can reduce energy and time but the price is still affordable for oil palm farmers. The egrek pipe is a tool used to cut fronds and fresh fruit bunches. Iron pipe is a mixture of aluminum containing 4% copper. Pipes and pipes can be modified into cutters of fronds and fresh fruit bunches. Modification of the tool utilizes iron pipes, iron plates, iron sticks and pipes. The principle is done by moving the tool that is designed and made forward and backward.References
Asmara, S., Kano, F. I., Kadir, M. Z., & Suharyatun, S. (2023). Unjuk Kerja Alat Pemotong Pelepah Sawit Tipe Egrek Secara Manual dan Mekanis Menggunakan Mesin Husqvarna 327 LDx Performance Test Of Palm Frond Cutter Sickle Type Manually And Mechanically With Husqvarna Machine 3. Jurnal Agrikultural, 2(1), 144–150.
Bahri, S., Zaini, A. K., Yusuf, I., Syarif, J., Marzuki, M., Amalia, I., Yuniati, Y., Zuhaimi, Z., & Ibrahim, A. (2022). Analisa Pengaruh Sudut Ketajaman Dodos Terhadap Gaya Pemotongan Pelepah Kelapa Sawit. Prosiding Seminar Nasional Politeknik Negeri Lhokseumawe, 6(1), 22–26.
Batubara, R. S. (2021). Analisis Terhadap Alat Pemanen Sawit (Egrek) Di PT. PerkebunanNusantara IV Kebun Mayang. TALENTA Conference Series: Energy and Engineering, 4(1), 247–252. https://doi.org/10.32734/ee.v4i1.1281
Chakim, L., Irawan, D., Studi, P., Elektro, T., Teknik, F., & Gresik, U. M. (2024). E -ISSN : 2746-0835 Volume 5 No 3 ( 2024 ) JUSTI ( Jurnal Sistem Dan Teknik Industri ) RANCANG BANGUN ALAT PENGUKUR KEDALAMAN SUNGAI DALAM GUA E -ISSN : 2746-0835 Volume 5 No 3 ( 2024 ) JUSTI ( Jurnal Sistem Dan Teknik Industri ). 5(3), 266–274.
Hakim Lubis, A. (2021). Desain Alat Uji Pemotongan Pelepah Kelapa Sawit Menggunakan Eggrek Pada Berbagai Sudut Kemiringan. Jurnal Engineering Development, 1(2), 72–79. https://jurnal.unimed.ac.id/2012/index.php/edev
Hermanto, M., Ismiyah, E., & Jufriyanto, M. (2024). E -ISSN : 2746-0835 Volume 5 No 3 ( 2024 ) JUSTI ( Jurnal Sistem Dan Teknik Industri ) ANALISIS PENURUNAN PRODUKSI EGREK PADA MESIN BLANKING MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS ( OEE ) DAN FAILURE MODE AND EFFECT ANALYSIS ( FMEA ) ( Studi Kasus : PT . Indobaja Primamurni ) E -ISSN : 2746-0835 Volume 5 No 3 ( 2024 ) JUSTI ( Jurnal Sistem Dan Teknik Industri ). 5(3), 251–258.
Hutajulu, H. M., Yanie, A., Adriana, L., & Safitri, D. (2023). Rancang Bangun Deteksi Kematangan Buah Kelapa Sawit Dan Peringatan Berbasis Telegram. Prosiding Seminar Nasional Teknik (Semnastek) UISU 2023: Peran Teknologi Berkelanjutan Dalam Era Disrupsi, 207–213.
Marpaung, M. A., Harahap, M. F., Ritonga, R. J. D., & Batu Mahadi Siregar. (2018). Pengembangan mesin potong rumput menjadi alat pemotong panen buah kelapa sawit. Piston ( ), 2, nO. 2,(2548–1878), 60–64.
Romiyadi, & Swasono, T. (2018). Modifikasi Mesin Pemotong Rumput Menjadi Alat Panen Sawit Mekanik. Jurnal Sains Dan Ilmu Terapan, 1(2), 14–18.
Totok Suwanda, Sudarisman Sudarisman, Fitroh Anugrah Kusuma Yudha, Aria Yudha Nur Rizky, & Nur Ardiyansyah. (2023). Pembuatan Alat Pemanen Sawit Elektrik. Jurnal Penelitian Rumpun Ilmu Teknik, 2(1), 90–104. https://doi.org/10.55606/juprit.v2i1.1206
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Indah Purnama Putri, Adi Febrianton, Rahmad Akbar
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
