Menurunkan Ng Talc Depth Pada Produk Spark Plug di Line Final Assy PT XYZ Menggunakan Metode Plan Do Check Action
DOI:
https://doi.org/10.31004/jutin.v8i2.44996Keywords:
5W+1H, PDCA, Quality Control, Product No Good, Final AssyAbstract
PT XYZ is one of the companies engaged in manufacturing automotive components. In the production process in the final line of the assy, there are quite a lot of No Good (NG) products every month. The types of not good (NG) products discussed in this study are talc depth, insulator height, u-ring depth, and caulking height. The dominant percentage of No Good is 45.88% of the total No Good in the October-December 2023 period. This study aims to find out what types of No Good often occur in products, factors that cause No Good in products, provide No Good product repair solutions, and repair results using Plan Do Check Action (PDCA) and 5W+1H methods. By the PDCA method, it is hoped that quality improvement will continue, so that the quality will improve. The results of the analysis and improvement showed that there was a decrease in the percentage of No Good to 1.89% after improvements in the final line assy for the January-March 2024 period.References
Hcgs, K. D., Dengan, S. H. E., Di, M., Kalimantan, P. T., & Persada, P. (2019). USULAN PERBAIKAN TINGKAT KEPUASAN KERJA. 01(1), 25–31.
Merjani, A., & Kamil, I. (2021). Penerapan Metode Seven Tools Dan Pdca (Plan Do Check Action) Untuk Mengurangi Cacat Pengelasan Pipa. PROFISIENSI: Jurnal Program Studi Teknik Industri, 9(1), 124–131. https://doi.org/10.33373/profis.v9i1.3313
Nugraha, K. A., Wahidin, J., & Nomor, S. (2021). Klasifikasi Pertanyaan Bidang Akademik Berdasarkan 5W1H menggunakan K-Nearest. 7(1), 44–51.
Per, P., Dan, K., Fiskal, K., Konsumsi, T., & Rahmawati, A. (n.d.). Pengaruh jumlah penduduk, jumlah kendaraan bermotor, pdrb per kapita dan kebijakan fiskal terhadap konsumsi energi minyak di indonesia. 1–28.
Rosikin, R., Rahayu, S., & Khofiyah, N. A. (2024). Analisis Lean Manufacturing Untuk Menurunkan Cycle Time Proses Assembly Menggunakan Metode PDCA Di PT X. Innovative: Journal Of Social Science Research, 4(3), 17103–17119. http://j-innovative.org/index.php/Innovative/article/view/11628%0Ahttps://j-innovative.org/index.php/Innovative/article/download/11628/8514
Shania, M., Andryani, R. J., & Jesselyn, C. (2022). UNIVERSITAS PEMBANGUNAN NASIONAL “ VETERAN ” JAWA TIMUR ANALISIS TOTAL QUALITY CONTROL SEBAGAI UPAYA MEMINIMALISASI RESIKO KERUSAKAN PRODUK OTOMOTIF PADA PT . XYZ. 146–152.
Syifa Aunillah, M. W., Kurniawan, M. D., & Hidayat, H. (2022). ANALISIS PENGENDALIAN KUALITAS PRODUKSI BATU KUMBUNG MENGGUNAKAN METODE SEVEN TOOLS (Studi Kasus : CV. Salsabilah Group). Sigma Teknika, 5(1), 030–038. https://doi.org/10.33373/sigmateknika.v5i1.4202
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Anggita Rahmasari, Siti Rahayu, Hasyrani Windyatri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
