ANALISIS PENGENDALIAN KUALITAS PRODUK BARREL MENGGUNAKAN METODE KAIZEN DAN PDCA FRAMEWORK DI PT. XYZ
DOI:
https://doi.org/10.31004/jutin.v7i4.36524Keywords:
Kaizen, PDCA, Quality control, Defective products, BarrelAbstract
PT. XYZ is a medical device manufacturing company that produces components for syringes, one of which is the Barrel product. The Barrel product has high demand, so effective quality control is essential to reduce the defect rate. This study aims to analyze ways to reduce defects in the Barrel product using the Kaizen and Plan-Do-Check-Action (PDCA) methods. In the planning phase (Plan), the dominant types of defects were identified using a Pareto diagram, which revealed three main defect types, with shortmold as the primary focus. The causes of this defect were analyzed using a Fishbone diagram. In the Do phase, corrective actions were implemented by setting objectives and goals for improvement, as well as identifying defective products with the help of the 5W+1H tool. The Check phase involved further inspection using a Check Sheet to analyze data showing a reduction in defects between October 2023 and January 2024. In the Action phase, quality control was implemented by monitoring employee performance and product quality, as well as evaluating the results of the improvements. The results of the study indicate a significant reduction in the number of defective products following the implementation of corrective actions.References
G. B. Mensah, M. M. Mijwil, and I. Adamopoulos, “Analyzing Ghana’s Pharmacy Act, 1994 (Act 489) Regarding Quality Control and Negligence Liability Measures for Artificial Intelligence Pharmacy Systems,” Babylonian J. Artif. Intell., vol. 2024, pp. 14–19, 2024.
M. Arif, H. Windyatri, and . S., “Analisa Cacat Produk Dan Kerusakan Mold Pada Proses Injection Molding Dan Tindakan Perbaikan Di PT. Patco Elektronik Teknologi,” J. Sains dan Teknol., vol. 4, no. 2, pp. 158–167, 2024, doi: 10.47233/jsit.v4i2.1809.
I. D. Sadina, A. P. Ramadani, P. D. Sembiring, W. S. Darma, A. Sidauruk, and S. B. Barus, “Implementasi Budaya Kewarganegaraan KAIZEN pada Kehidupan Sosial di Jurusan Pendidikan Pancasila dan Kewarganegaraan Implementation of KAIZEN Citizenship Culture in Social Life in the Department of Pancasila and Citizenship Education,” Jotka J. Educ., vol. 1, no. 1, pp. 1–5, 2021.
A. Muiz, M. Yasin, and F. Arsyad, “SEJARAH DAN TOKOH TOTAL QUALITY MANAGEMENT (TQM) SERTA IMPLIKASINYA TERHADAP KONTEKS PENDIDIKAN,” Al Wildan J. Manaj. Pendidik. Islam, vol. 2, no. 1, pp. 13–21, 2024.
R. Pambudi, “Analisis Risiko Kecelakaan Kerja pada Pembangunan Underpass (Studi Kasus: PT. Adhi Karya-Proyek Pembangunan Jalan Tol Solo-Yogyakarta-NYIA Seksi II Paket 2.2 Monjali-Gamping).” Universitas Islam Indonesia, 2024.
H. Nasti, “Analisis Pengendalian Kualitas Produk Dengan Metode Statistical Quality Control,” J. Bimbing. dan Konseling, vol. 3, no. 1, pp. 1–11, 2019.
F. A. Ekoanindyo, “Pengendalian Kualitas Dengan Pendekatan Six Sigma Di Pt X,” Din. Tek. Ind., vol. XV, no. 1, p. 3, 2022.
Intanghina, “Tinjauan Pustaka Tinjauan Pustaka,” Conv. Cent. Di Kota Tegal, p. 9, 2019.
R. A. Rakhman, “ANALISIS PENGENDALIAN KUALITAS PRODUK MENGGUNAKAN METODE STATISTICAL QUALITY CONTROL (SQC) DI PT. MADUSARI NUSAPERDANA.” Universitas Pelita Bangsa, 2024.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Dean Pranata, Hasyrani Windyatri, Suhendra Suhendra
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.