Quality Control Analysis Using Six Sigma Method and Root Cause Analysis on 100ml Bottles at PT. XYZ Pandaan
DOI:
https://doi.org/10.31004/jutin.v8i3.46883Keywords:
Kontrol Kualitas, Enam Sigma, Analisis Penyebab Akar, Botol 100mlAbstract
This study investigates quality control of 100ml bottle products at PT. XYZ Pandaan using the Six Sigma methodology and Root Cause Analysis. The primary concern is a high defect rate, which negatively impacts production efficiency and product quality. Over a 30-day observation period, 9,810 sample units were examined. Five major defect types were identified: black spots, oil stains, uneven bottle mouths, folded mouths, and deformations. Pareto analysis revealed that black spots, uneven mouths, and folded mouths constituted over 80% of total defects. A P-chart analysis indicated an unstable process. The Defects Per Million Opportunities (DPMO) was 5,708, corresponding to a sigma level of 4.03. The process capability index was 1.34, suggesting the process is capable but requires refinement. RCA was employed to develop improvement strategies, including operator training, preventive maintenance, and stricter quality control. The proposed control plan includes SOP implementation, daily checklists, continuous training, and visual management tools.References
Astrini, G. Y., & Imran, N. A. (2022). Analisis Pengendalian Kualitas Untuk Mengurangi Cacat Kain Sarung Pada Proses Produksi Mesin Air Jet Loom (AJL) Jacquard. PROSIDING, 427–432.
Dawadi, S., Shrestha, S., & Giri, R. A. (2021). Mixed-methods research: A discussion on its types, challenges, and criticisms. Journal of Practical Studies in Education, 2(2), 25–36.
Gaspersz, V. (2002). Pedoman Implementasi Six Sigma. Gramedia Pustaka Utama, Jakarta.
Haq, I. S., & Purba, M. A. (2020). Kajian penyebab kerusakan door packing pada tabung sterilizer menggunakan metode root cause analysis (rca) di sungai kupang mill. Jurnal Vokasi Teknologi Industri (Jvti), 2(2).
Hizbullah, J. A., & Wahyuni, H. C. (2023). Integrasi Six Sigma dan Root Cause Analysis dalam Peningkatan Kinerja di PT XYZ. Matrik : Jurnal Manajemen Dan Teknik Industri Produksi, 24(1), 73. https://doi.org/10.30587/matrik.v24i1.5950
Hutama, A. S., & Widyasmara, N. A. R. (2022). Minimasi Cacat Sink mark Pada Proses Injeksi Molding Produk T-Valve Female GeNose C19. Jurnal Tekstil: Jurnal Keilmuan Dan Aplikasi Bidang Tekstil Dan Manajemen Industri, 5(2), 69–76.
Jailani, M. S. (2023). Teknik pengumpulan data dan instrumen penelitian ilmiah pendidikan pada pendekatan kualitatif dan kuantitatif. IHSAN: Jurnal Pendidikan Islam, 1(2), 1–9.
Khunaifi, A., Primadasa, R., & Sutono, S. B. (2022). Implementasi Lean Manufacturing untuk Meminimasi Pemborosan (Waste) Menggunakan Metode Value Stream Mapping di PT. Pura Barutama. Jurnal Rekayasa Industri (JRI), 4(2), 87–93.
Mahaputra, M. S. (2021). Analisis Pengendalian Kualitas Produk Plastik Injeksi dengan Menggunakan Metode Statistical Process Control (SPC) dan Kaizen di CV. Gradient Kota Bandung. Media Nusantara, 18(1), 1–16.
Mahardika, K. B. D., Sarofa, U., & Jariyah, J. (2023). Peningkatan Kualitas Produk Sempol Ayam Frozen Dengan Metode Sigma di UMKM XYZ, Gianyar-Bali. AKM: Aksi Kepada Masyarakat, 4(1), 199–212.
Mittal, A., Gupta, P., Kumar, V., Al Owad, A., Mahlawat, S., & Singh, S. (2023). The performance improvement analysis using Six Sigma DMAIC methodology: A case study on Indian manufacturing company. Heliyon, 9(3).
Mohajan, H. K. (2020). Quantitative research: A successful investigation in natural and social sciences. Journal of Economic Development, Environment and People, 9(4), 50–79.
Nandakumar, N., Saleeshya, P. G., & Harikumar, P. (2020). Bottleneck identification and process improvement by lean six sigma DMAIC methodology. Materials Today: Proceedings, 24, 1217–1224.
Nuralisa, R. A., & Musfiroh, I. (2022). Analisis Kapabilitas Proses Produk Farmasi X Dengan Pendekatan Six Sigma Di Pt Y. Majalah Farmasetika, 7(5), 494–506.
Qayyum, S., Ullah, F., Al-Turjman, F., & Mojtahedi, M. (2021). Managing smart cities through six sigma DMADICV method: A review-based conceptual framework. Sustainable Cities and Society, 72, 103022.
Rudiawan, H. (2021). Peranan Manajemen Produksi dalam Menyelaraskan Kinerja Perusahaan. Jurnal Manajemen Fe-Ub, 9(2).
Sá, J. C., Vaz, S., Carvalho, O., Lima, V., Morgado, L., Fonseca, L., Doiro, M., & Santos, G. (2022). A model of integration ISO 9001 with Lean six sigma and main benefits achieved. Total Quality Management & Business Excellence, 33(1–2), 218–242.
Santoso, R. P., Ningsih, L. S. R., & Irawati, W. (2024). Implementation Of Segmenting Targeting And Positioning Strategies In Improving Marketing Performance. BIMA : Journal of Business and Innovation Management, 6(2), 280–292. https://doi.org/10.33752/bima.v6i2.5939
Tsung, F., & Wang, K. (2023). Six Sigma. In Springer handbook of engineering statistics (pp. 239–259). Springer.
Widodo, A., & Soediantono, D. (2022). Benefits of the six sigma method (dmaic) and implementation suggestion in the defense industry: A literature review. International Journal of Social and Management Studies, 3(3), 1–12.
Yanamandra, R., & Alzoubi, H. M. (2022). Empirical investigation of mediating role of six sigma approach in rationalizing the COQ in service organizations. Operations and Supply Chain Management: An International Journal, 15(1), 122–135.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Yogi Pratama Wianta, Khafizh Rosyidi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
