Analisa risiko kecelakaan kerja dengan metode FMEA (Failure Mode And Analysis) Dan FTA (Fault Tree Analysis) (Studi kasus: PT Emitraco Transportasi Mandiri)

Authors

  • Ni Luh Putu Hariastuti Institut Teknologi Adhi Tama Surabaya
  • Wahyu Ivan Syahputra Institut Teknologi Adhi Tama Surabaya

DOI:

https://doi.org/10.31004/jutin.v8i1.40509

Keywords:

Work Accident Risk, Risk Assesment, FMEA, FTA, Service

Abstract

PT Emitraco Transportasi Mandiri is a reasonably large company engaged in the service sector, especially in trucking, warehousing, and container depot services. In running its business, the company faces many dangerous things, especially in production process activities that can potentially cause work accidents. Production activities ranging from the stuffing process, stripping containers, and arranging containers and goods in the warehouse are the primary sources of risk for work accidents. Therefore, this study was conducted using risk assessment analysis to reduce the potential risk of work accidents. The study's results showed that with the results of the FMEA analysis, the highest RPN value was obtained in the activity of the emergence of depot branches with an RPN value of 351. Then, based on the results of the FTA analysis on the potential risk of work accidents, 11 priority essential events were produced, which were strengthened by the MOCUS method analysis, resulting in 6 basic event combinations. The proposed improvement solution for the company is to conduct periodic monitoring during the container arrangement process by considering the predetermined SOP..

References

Akbar, A., Mangka, A., & Andivas, M. (2024). Analisis Tingkat Resiko Kecelakaan Kerja pada Galangan Kapal Logistik di PT X dengan Metode HIRARC. Jurnal Teknik Industri Terintegrasi, 7(2), 664–671. https://doi.org/10.31004/jutin.v7i2.23764

Bina, U., & Syahdan, K. (2016). Analisis Kepuasan Konsumen PT . ISS Indonesia untuk Merencanakan Peningkatan Kualitas Pelayanan dengan Menggunakan Metode Service Quality.

Cherian Jos, B., & Mathew, G. (2008). FMEA Analysis for Reducing Breakdowns of a Sub System in the Life Care Product Manufacturing Industry. Certified International Journal of Engineering Science and Innovative Technology (IJESIT), 9001(2), 2319–5967.

Hanafi;, M. M. (2006). Manajemen Risiko.

Ilie, G., & Ciocoiu, C. N. (2010). Application of Fisgbone Diagram To Determine the Risk of an Event With Multiple Causes Management Research and Practice. Application of Fishbone Diagram To Determine the Risk of an Event With Multiple Causes Management Research and Practice, 2(1), 1–20.

Mirajhusnita, I., & Hermawan, O. H. (2024). Analisis Manajemen Risiko Terhadap Bidang Keselamatan dan Kesehatan Kerja pada Proyek Pembangunan Gedung Parkir di PT. SAS Kreasindo Utama Tegal. Jurnal Engineering, 15(1), 8–17. https://doi.org/10.24905/jureng.v15i1.4

Priyanta, D. (2000). (2000). No Title. Keandalan Dan Perawatan.

Putra, D. M., & Triana, M. I. (2024). Analisis Faktor Penyebab Keterlambatan Pelaksanaan Proyek Konstruksi pada CV. X Menggunakan Metode FTA. Jurnal Teknik Industri Terintegrasi, 7(2), 969–979. https://doi.org/10.31004/jutin.v7i2.28181

Ramadhan, R. S., & Hariastuti, N. L. P. (2022). Upaya Meminimalisasi Kecelakaan Kerja Pada Bagian Warehouse Pt. Gading Murni Dengan Menggunakan Metode Hazard Identification and Risk Assesment (Hira) Dan Hazard and Operability Study (Hazop). Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan, 2(0), 443–448. http://ejurnal.itats.ac.id/senastitan/article/view/2767

Satudata Kemnaker | Portal Data Ketenagakerjaan RI. (n.d.).

Sidiq, F. M. (2021). Analisis Penerapan Sistem Manajemen Keselamatan DanKesehatan Kerja (Smk3) Pada Pt. Eins TrendTahun 2021. Journal Of Health Services, 01(01), 64–71.

Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001 / Soehatman Ramli | Perpustakaan Mahkamah Konstitusi. (n.d.).

Wijaya, A., Panjaitan, T. W. S., & Palit, H. C. (2015). Evaluasi Kesehatan dan Keselamatan Kerja dengan Metode HIRARC pada PT. Charoen Pokphand Indonesia/ Jurnal Titra, 3(1), 29–34

Downloads

Published

2025-01-17

How to Cite

Hariastuti, N. L. P., & Syahputra , W. I. (2025). Analisa risiko kecelakaan kerja dengan metode FMEA (Failure Mode And Analysis) Dan FTA (Fault Tree Analysis) (Studi kasus: PT Emitraco Transportasi Mandiri). Jurnal Teknik Industri Terintegrasi (JUTIN), 8(1), 796–806. https://doi.org/10.31004/jutin.v8i1.40509

Issue

Section

Articles of Research

Similar Articles

1 2 3 4 5 6 7 > >> 

You may also start an advanced similarity search for this article.