Analisis risiko kecelakaan kerja dengan Metode HIRARC dan Diagram Fishbone di Divisi Pergudangan pada PT Z
DOI:
https://doi.org/10.31004/jutin.v8i1.39372Keywords:
Fishbone Diagram, HIRARC, Work AccidentAbstract
The warehouse is the "spearhead" that supports all company activities. In PT Z's warehouse, the process of receiving, retrieving, and moving goods still has the potential for work accidents. Hazard identification was carried out using the HIRARC and Fishbone Diagram methods to determine the risks and causes. The results of the study showed that there were six activities with seven potential hazards, of which four hazards were classified as medium risk and three others were low risk. Recommendations for improvement include strengthening SOPs for the use of PPE, maintaining the cleanliness and safety of the work area, adding K3 signs, using material handling tools, and improving air ventilation. No potential high-risk hazards were found, reflecting the success of risk management in the warehouse. However, regular evaluations, employee training, and strengthening mitigation are still needed to minimize the risk of future work accidents.References
Amri Lubis, M. J., Sihombing, G., & Hasta Yanto, A. B. (2024). Analisis Resiko Kecelakaan Kerja Menggunakan Metode HIRARC Pada PT. Telkom Indonesia Jakarta Utara. IMTechno: Journal of Industrial Management and Technology, 5(1), 15–23. https://doi.org/10.31294/imtechno.v5i1.2414
Giananta, P., Hutabarat, J., & Soemanto. (2020). Analisa Potensi Bahaya Dan Perbaikan Sistem Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC Di PT. Boma Bisma Indra. Jurnal Valtech (Jurnal Mahasiswa Teknik Industri), 3(2), 106–110.
Indragiri, S., & Yuttya, T. (2020). Manajemen Risiko K3 Menggunakan Hazard Identification Risk Assessment and Risk Control (Hirarc). Jurnal Kesehatan, 9(1), 1080–1094. https://doi.org/10.38165/jk.v9i1.77
Leonardo, L., & Sarvia, E. (2022). Hazard identification risk assessment and risk control (HIRARC) of safety junior supervisor in a construction company. Journal Industrial Servicess, 8(1), 99. https://doi.org/10.36055/jiss.v8i1.14719
Marwah, D. S., Naufal, M., Zata, K. N., & Amri, M. F. (2024). HIRADC dan HIRADC dalam proses industri dan manajemen risiko K3. Journal of Disaster Management and Community Resilience, 1(1), 19–27. https://doi.org/10.61511/jdmcr.v1i1.603
Nurul Ilmi, N. I., Semnasti, V. A. J., & Semnasti, M. C. P. I. (2023). Penggunaan Metode HIRARC dan Diagram Fishbone dalam Analisis Risiko K3 pada Industri Baja Karbon. Waluyo Jatmiko Proceeding, 16(1), 431–440. https://doi.org/10.33005/wj.v16i1.65
Rifdah, Z. Y. (2023). ANALISIS EFEKTIFITAS PENYIMPANAN BARANG DI GUDANG PADA PT. ZYR. Jurnal Bisnis, Logistik dan Supply Chain, 3, 83–86.
Ririh, K. R. (2021). Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan Diagram Fishbone pada Lantai Produksi PT DRA Component Persada. Go-Integratif?: Jurnal Teknik Sistem dan Industri, 2(2), 135–152. https://doi.org/10.35261/gijtsi.v2i2.5658
Rumae, S. S. A., Russeng, S. S., & Mahmud, N. U. (2023). Penerapan Manajemen Risiko Dengan Metode Hirarc Dalam Mencapai Zero Accident Di Pt. Iki Makassar. Jurnal Kesehatan Tambusai, 4(2), 850–859.
Sarbiah, A. (2023). Penerapan Pelaksanaan Keselamatan dan Kesehatan Kerja (K3) pada Karyawan. Health Information: Jurnal Penelitian, 15(2), e1210–e1210.
Susanto, A. D., & Momon, A. (2024). Analisis Penggunaan Alat Pelindung Diri pada Pekerja di PT . Djabesmen Menggunakan Metode Fishbone . Jurnal Industrika, 8(4).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Aisyah Eka Wulandari, Iriani Iriani

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.