Analisis Pembuatan Alat Pembersih Filter Udara pada Truk Hino dengan Metode Rasional di PT. XYZ
DOI:
https://doi.org/10.31004/jutin.v9i1.54667Keywords:
Maintenance, Air Filters, Hino Trucks, Efficiency, K3Abstract
This research focuses on the analysis of the design and manufacture of an air filter cleaning tool for Hino trucks using compressed air as the cleaning medium. Generally, the air filter cleaning process is carried out by spraying air from the outside to the inside, so that some dust remains in the deepest layer of the filter. In this research, a tool was developed that allows the air spray direction to be reversed, namely from the inside of the filter to the outside, so that dirt particles can be removed more effectively. Test results conducted at PT. XYZ showed that cleaning time can be shortened from three minutes to one minute, with more optimal cleaning results. This tool is manually operated and all components are made from very strong local materials. This innovation is expected to be widely implemented in commercial vehicle workshops in Indonesia to improve efficiency, work safety, and the effectiveness of air filter maintenance.References
Cahyono, M. D., Indiyono, L., Arnold, M. Y., & Susiati, D. (2025). Penerapan metode Hirarc K3 mesin gerinda tangan pada industri fabrikasi PT. XYZ. JUTIN : Jurnal Teknik Industri Terintegrasi, 8(1), 814–823.
Fauliyadi, Nalhadi, A., & Cahyadi, D. (2021). Perencanaan Sistem Perawatan Mesin Dust Collector Pecs Id Fan Menggunakan Metode Reliability Centered Maintenance. Jurnal Terapan Teknik Industri, 2, 30–40. https://doi.org/10.37373/jenius.v2i1.102
Firdaus, N. A., & Wulandari, B. (2023). Analisa Efisiensi Unit Bag Filter Dan Wet Scrubber Terhadap Parameter Partikulat, So2, No2, Dan Opasitas Pada Industri Besi Dan Baja Di Surabaya. Environmental Engineering Journal ITATS, 3(1), 57–64.
Halderman, J. D. (2015). Automotive Engines: Theory and Servicing James D. Halderman Seventh Edition.
Indiyono, L., Nurmawati, & Cahyono, M. D. (2025). JUTIN : Jurnal Teknik Industri Terintegrasi Analisis K3 Mesin Bor Tangan pada Industri. Jurnal Teknik Industri Terintegrasi, 8(3), 3311–3318. https://doi.org/10.31004/jutin.v8i3.47823
M, D. G. K., & Jyothi, P. N. (2022). Design & Development of an Air Purifier-A Review. International Journal of Latest Engineering and Management Research, 07(07), 25–34.
Muhammad, A., Rosadi, P. E., Cahyadi, T. A., Wiyono, B., Wiyono, E., Pertambangan, T., Pembangunan, U., Veteran, N., Rosadi, P. E., Cahyadi, T. A., & Wiyono, B. (2025). Analisis Hidrologi Dengan Menggunakan Metode Rasional Dan Nakayasu Untuk Evaluasi Perimeter Ditch. 10(1), 21–28.
Nur, R., Hidayatullah, A., Dewi, M. S., & Suryady, S. (2025). Evaluasi Dampak Perawatan Filter Udara terhadap Performa Mesin Mobil : Tinjauan Empiris di Bengkel Honda Camp Fast Jati Asih. Jurnal Riset Rumpun Ilmu Teknik, 4(April), 774–781.
Suryadi, D., Rulatif, R. S., & Mulyana, I. (2023). Sistem Pendukung Keputusan Pemilihan Alat Pembersih Udara Terbaik Menggunakan Metode Entropi dan Vikor. Jurnal Ilmu Komputer Al Muslim, II(1).
Wirakusuma, K. W., Opu, A. S., Pratama, A. B., Fan, J., Putra, E., & Boangmanalu, D. (2024). Rancang Bangun Alat Penyemprot Otomatis Untuk Ban Dump Truck Pada Pt. Dexin Steel Indonesia. Jurnal Ilmiah Teknik Mesin, 05(01), 72–79.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Lalak Indiyono, Manggi Dwi Cahyono, M Yusuf Arnol, Karrolus Borromeus Wake Wara Leta Oja
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
