Identifikasi Analisis Resiko Keselamatan Kerja pada Proses Pemotongan Menggunakan Grinda dengan Metode Job Safety Analysis (JSA) di PT. XYZ
DOI:
https://doi.org/10.31004/jutin.v8i3.46316Keywords:
JSA, Job Safety Analysis, Risk, DangerAbstract
PT. XYZ is a company operating in the field of Electrical Contractor, Service and Maintenance, Electrical Equipment and Supplies. Grinding and welding carry the risk of work accidents that may occur during work. The aim of this research is to identify the risk of work accidents during grinding at PT. XYZ using the Job Safety Analysis method. The method used in this research is to carry out direct observations to control work safety in order to reduce the impact of the risk of work accidents. The results obtained are the results of the risk assessment in each job, there is a risk of work accidents in the griding section with likelihood and severity values. From the results of risk control in the cutting process, it can be done by means of technical control (repairing or adding technical facilities or equipment such as adding K3 signs).References
Alfons Willyam Sepang Tjakra, B. J., Ch Langi, J. E., & O Walangitan, D. R. (2013). Manajemen Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proyek Pembangunan Ruko Orlens Fashion Manado. Jurnal Sipil Statik, 1(4), 282–288.
Faradhina Azzahra, Enny Purwati Nurlaili, & Jonathan Dharmaputra Ratisan. (2022). Analisis Risiko Kerja Menggunakan Job Safety Analysis (JSA) Dengan Pendekatan Hazard Identification, Risk Assessment And Risk Control (Hirarc) di PT Indo Java Rubber Planting Co. Jurnal Agrifoodtech, 1(1), 21–34. https://doi.org/10.56444/agrifoodtech.v1i1.54
Fauzi. (2009). LAPORAN KHUSUS JOB SAFETY ANALYSIS SEBAGAI LANGKAH AWAL DALAM UPAYA PENCEGAHAN TERJADINYA KECELAKAAN AKIBAT KERJA DI AREA ATTACHMENT FABRICATION PT. SANGGAR SARANA BAJA JAKARTA TIMUR. Tugas Akhir.
Ilham, M., Akbar, M., Anggara, R. D., Wibowo, K., & Adhy, D. S. (2020). Analisis Pelaksanaan Keamanan dan Keselamatan Kerja (K3) Dengan Metode Job Safety Analysis (JSA) Proyek Pembangunan Jembatan SiKatak Unversitas Diponegoro Semarang. Prosiding Konstelasi Ilmiah Mahasiswa Unissula (KIMU) Klaster Engineering, 277–284.
Ilmansyah, Y., Mahbubah, N. A., Widyaningrum, D., Studi, P., Industri, T., Gresik, U. M., & Bahaya, P. (2020). PENERAPAN JOB SAFETY ANALYSIS SEBAGAI UPAYA PENCEGAHAN KECELAKAAN KERJA DAN PERBAIKAN KESELAMATAN KERJA DI PT SHELL INDONESIA. 8(1).
Levi, A. (2014). USULAN PERBAIKAN KESELAMATAN KERJA MENGGUNAKAN METODE JOB SAFETY ANALYSIS (JSA) DAN FAILURE MODE AND EFFECT ANALYSIS (FMEA). Spektrum Industri, 15(2), 151–167.
Muhammad Arno Yuli Saputra, Muhammad Nur Fadillah, D. S. (2014). Aplikasi Checklist Safety Berbasis Mobile Menggunakan Metode Job Safety Analysis (Jsa) Untuk Audit Kesehatan Dan Keselamatan Kerja (K3) Di Pt.Matahari Putra Prima,Tbk. Jurnal Sistem Informasi Universitas Suryadarma, 8(2). https://doi.org/10.35968/jsi.v8i2.740
Rakhman, F., Andesta, D., & Waiusr, A. (n.d.). IDENTIFIKASI BAHAYA KECELAKAAN KERJA DI PT . TOSHIN PRIMA FINE BLANKING MENGGUNAKAN METODE JOB SAFETY ANALYSIS DAN HAZARD. 2(2).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Machlum Aditiya, Mustaqim Mustaqim
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
