Analisis perawatan mesin tenun 0208 pada kain 11717 menggunakan metode Overall Equipment Effectivenes (OEE) dan Six Big Losses pada PT. Libolon Fiber System
DOI:
https://doi.org/10.31004/jutin.v8i1.37250Keywords:
OEE, Six Big LossesAbstract
Libolon Fiber System is a company that produces woven fabrics. To optimize the quality and quantity of production, the company must carry out maintenance actions on the machine. The research carried out focused on the 0208 weaving machine which is in the weaving department. Problems that occurred at PT. The Libolon Fiber System is that the production target was not achieved due to a decrease in efficiency, one of the causes of the decrease in efficiency was because there were many sudden machine breakdowns while the production process was in progress. Based on these constraints, an analysis was carried out implementing the overall equipment effectiveness and six big losses method. The results of the analysis show that the overall equipment effectiveness (OEE) on the 0208 weaving machine is obtained on average at 79.50%, where the factors that influence OEE in the six big losses are idling and minor stoppage losses with an average of 23%.References
Hafiz, K., & Martianis, E. (2019). Analisis Overall Equipment Effectiveness (OEE) pada Mesin Caterpillar Type 3512B. SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin, 13(2), 87-96.
Jannah, R. M., Supriyadi, S., & Nalhadi, A. (2017, November). Analisis Efektivitas pada Mesin Centrifugal dengan Menggunakan Metode Overall Equipment Effectiveness (OEE). In Prosiding Seminar Nasional Riset Terapan| SENASSET (pp. 170-175).
Kameiswara, R. A., Sulistyo, A. B., & Gunawan, W. (2018). Analisa Overall Equipment Effectiveness (OEE) Dalam Mengurangi Six Big Losses Pada Cooling Pump Blower Plant PT. Pabrik Baja Terpadu. Jurnal Intent: Jurnal Industri Dan Teknologi Terpadu, 1(1), 67-78.
OEE, M. O. E. E., Essentra, P. M. C. D. P., & SNATIF, S. P. Ansori, N., dan Mustajib, MI 2013. Sistem Perawatan Terpadu (Integrated Maintenance System). Yogyakarta: Graha Ilmu. Ardian, Aan, M. Pd. 2013. Handout Perawatan dan Perbaikan Mesin. Yogyakarta: Pendidikan Teknik Mesin Fakultas Teknik Universitas Negri Yogyakarta. Asgara, BY, dan Hartono, G. 2014. Analisis efektifitas mesin overhead crane.
Prabowo, R. F., Hariyono, H., & Rimawan, E. (2020). Total Productive Maintenance (TPM) pada perawatan mesin grinding menggunakan metode Overall Equipment Effectiveness (OEE). Journal Industrial Servicess, 5(2), 207-212.
Prihastono, E., & Prakoso, B. (2017). Perawatan Preventif untuk mempertahankan utilitas Performance pada mesin cooling tower di cv. arhu tapselindo Bandung. Dinamika Teknik Industri.
Ramakumar,R.(1993). Engineering reliability: fundamentals and applications. In Engineering reliability: fundamentals and applications (pp. 482-482).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Priyo Ari Wibowo, Imam Wahyu Nugraha
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
