Analisa Kapasitas Produksi Line Welding LDT Menggunakan Metode Rough Cut Capacity Planning pada PT. ABC

Fauzan Wijdan Hilmi  Edison; Winarno Winarno; Billy  Nugraha

doi:10.31004/jutin.v7i2.27243

Authors

Fauzan Wijdan Hilmi Edison Universitas Singaperbangsa Karawang
Winarno Winarno Universitas Singaperbangsa Karawang
Billy Nugraha Universitas Singaperbangsa Karawang

DOI:

https://doi.org/10.31004/jutin.v7i2.27243

Keywords:

Demand forecasting, Production Capacity, Rought Cut Capacity Planning

Abstract

PT ABC is a limited liability company engaged in heavy automotive production that has many products such as medium trucks, small trucks, bus chassis, engines and other spare parts. In assembling a Light Duty Truck through several work stations and must go through production schedule planning to meet the requested production demand. In the case of the welding line, there is a mismatch in production results with the planned production results at the end of the production period not in accordance with the scheduling carried out. So it is necessary to analyze production capacity using the calculation of Rough Cut Capacity Planning, after the calculation it is found that there are still several work stations that experience a lack of production capacity of -849 hours and excess capacity for production throughout the 12-month period. This shows that the lack of efficiency of the available capacity at each station in the LDT welding line so that it cannot produce according to the planned production demand

References

Gaspers, V. (2009). Production Planning and Inventory Control. Gramedia Pustaka Utama.

Heizer, J., Render, B., & Munson, C. (2020). Operations management?: sustainability and supply chain management (13th ed.). Pearson.

Hidayat, T., Ulum, R. B., & Widarman, A. (2023). RENCANAAN KAPASITAS PRODUKSI PUPUK DENGAN MENGGUNAKAN METODE ROUGH CUT CAPACITY PLANNING (RCCP) PADA PT.PUPUK KUJANG. JURNAL JUKIM, 2(4). https://doi.org/10.56127/ju

I Made Adnyana. (2021). EKONOMI MANAJERIAL. Lembaga Penerbitan Universitas Nasional (LPU-UNAS). http://repository.unas.ac.id/4276/1/EKONOMI%20MANAJERIAL.pdf

Matswaya, A., Sunarko, B., Widuri, R., Indriati, S., Manajemen, J., Ekonomi dan Bisnis, F., & Jenderal Soedirman, U. (2019). ANALISIS PERENCANAAN KAPASITAS PRODUKSI DENGAN METODE ROUGHT CUT CAPACITY PLANNING (RCCP) PADA PEMBUATAN PRODUK KASUR BUSA (Studi pada PT Buana Spring Foam di Purwokerto) (Vol. 26).

Pratama, A. A., Agushinta R., D., & Mukhyi, M. A. (2022). Penerapan Metode Moving Average dan Exponential Smoothing untuk Prediksi Nilai Ekspor dan Impor Indonesia. Jurnal Ilmiah FIFO, 14(1), 58. https://doi.org/10.22441/fifo.2022.v14i1.006

Pratama, D. A., Hidayati, S., Suroso, E., & Sartika, D. (2020). Analisis Peramalan Permintaan dan Pengendalian Persediaan Bahan Baku Pembantu pada Industri Gula (Studi Kasus PT. ABC Lampung Utara). Jurnal Penelitian Pertanian Terapan, 20(2). https://doi.org/10.25181/jppt.v120i2.1636

Putri Adhiana, T., Prakoso, I., & Nidya Pangestika. (2020). EVALUASI KAPASITAS PRODUKSI BAN MENGGUNAKAN METODE RCCP DENGAN PENDEKATAN BOLA. JRSI.

Raihan, A., & Herwanto, D. (2021). PERENCANAAN JADWAL INDUK PRODUKSI KOMPONEN BAND KOMP BATTERY DI PT. MADA WIKRI TUNGGAL. STRING (Satuan Tulisan Riset Dan Inovasi Teknologi).

Sugiatna, A. (2021). ANALISIS PERENCANAAN KAPASITAS PRODUKSI DENGAN MENGGUNAKAN METODA ROUGHT CUT CAPACITY PLANNING PENDEKATAN CPOF DI PT. ABC. Jurnal Ilmiah Nasional Bidang Ilmu Teknik, 09.

Suhartini, N., Aprianti, N., & Mulyanto, T. (2020). IMPLEMENTASI METODE CUT AND FIT PADA PENENTUAN JADWAL INDUK PRODUKSI PRODUK NSH. Jurnal Ilmiah Teknologi Dan Rekayasa, 25(1), 50–66. https://doi.org/10.35760/tr.2020.v25i1.2544