Analisis Penyebab Over Heating Untuk Tindakan Perawatan Pada Screw Compressor Di PT. Semen Padang Unit Indarung IV
DOI:
https://doi.org/10.31004/jutin.v6i4.20695Keywords:
Compressor, trouble shooting, air filter and, maintenanceAbstract
Semen Padang Indarung IV unit has a screw compressor type compressor unit to produce high pressure air. In its operations, one of the Atlas Copco type compressor units often experiences over heating problems, namely the working temperature exceeds 1000 C. The method used is trouble shooting the compressor system, such as checking the lubricating oil, pressure, valves, working temperature and cooling system. , as well as overhaul maintenance actions if necessary. Based on the research results, it was found that the factors that cause overheating of the compressor are: Dirty air quality affects the condition of the air filter for air supply, limited space for placing the compressor causes the air supply to decrease, the oil filter has passed its useful life and is not suitable for use, and the oil cooler is clogged with scale, which hinders the oil cooling process. Based on this damage, recommendations for maintenance activities on the Atlas Copco Compressor are: maintaining air quality, periodically cleaning the tubes in the oil cooler, replacing the new oil filter according to compressor specifications, as well as comprehensive maintenance measuresReferences
Apriandi M.S., Santhi W. 2022 ., Identifikasi Penyebab Tidak Optimalnya Kinerja Kompresor Utama Terhadap Pengisian Botol Angin di Kapal KM. Hari Baru Indonesia, Jurnal Sains Teknologi Transportasi Maritim , Volume 4 No. 1
Balduzzi, Francesco, et al. 2014. “Reciprocating Compressor Cylinder’s Cooling: A Numerical Approach Using CFD With Conjugate Heat Transfer” Proceedings of the ASME 2014 Pressure Vessels & Piping Conference. Anaheim, California, USA.
Endrodi. 2006. Tabung Udara Kompresor. Jakarta: PT. Pradnya Paramita.
Faisal Yanuar, Adiba. 2016. Pemilihan Kompresor Pada Instalasi Udara Bertekanan Sistem Pneumatik Hydrolik diPressure Tank Line Indoor PT. PJB. Surabaya: Institut Teknologi Sepuluh Nopember.
Giampaolo, A., 2010. Compressor handbook: principles and practice. CRC Press.
Hariyadi, Paris J.M.2020., Senda,Tasdik Tona, Analisis Menurunnya Produksi Udara Bertekanan yang Dihasilkan Oleh Air Compressor di Kapal SPOB. Cin tiana Pratama, Jurnal VENUS Volume 08 Nomor 2.
Ladersita, S. (2016). Troubleshooting Overheating pada screw Compressor Type GA 160 W . Retieved from
http://repo.polinpdg.ac.id/2629/ ,(diakses 03 Juni 2023 Jam: 16.30)
Smith, J., D.W., Crawford, and P. S. Moore, 2016. Marine auxiliary machinery.
Elsevier.
Stiaccini,Isacco,et.al.2016.“A Reciprocating Compressor Hybrid Model With Acoustic FEM Characterization”.University of Florence, Italy.Science Direct- International Journal of Refrigeration 63 , pp. 171–183.
Storage, T.C.2019 “Analisa Efisiensi Daya Kompresor Pada Mesin,” J. Tek.
Mesin, Vol. 8, no. 2, p. 31.
Sularso dan Tahara, Haruo. 2006. Pompa dan Kompressor - Pemilihan, Pemakaian dan Pemeliharaan”, cetakan kesembilan, Jakarta: PT. Pradnya Paramitha.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Adi Candra, Risal Abu, Mukhnizar Mukhnizar, Zulkarnain Zulkarnain, Azmil Azman
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
