USULAN PERBAIKAN SISTEM KESELAMATAN KERJA KARYAWAN BAGIAN PRODUKSI DENGAN MENGGUNAKAN METODE JOB SAFETY ANALYSIS (JSA) (Studi Kasus : PT. XYZ)

Authors

  • Muhammad Nur Teknik Industri UIN Suska
  • sofian sofian Teknik Industri UIN Suska

DOI:

https://doi.org/10.31004/jutin.v3i2.1350

Keywords:

JSA, occupational health, safety, sterilizer

Abstract

PT. XYZ is a company engaged in oil palm plantations and processing into semi-finished products in the form of Crude Palm Oil (CPO), palm oil processing process that accompanied the development of palm oil production in between can have a negative impact on employee safety. It can be seen from some of the data such accidents such as minor injuries, injuries of moderate to with severe injuries. It is therefore necessary identifying the causes of accidents and analyze the problems to improve and maintain the safety, employee safety and minimize the extent of occupational accidents that may occur during the production by using Job Safety Analysis (JSA). The conclusion that can be drawn based on the calculation of Statistics Accidents at accident data with a look at the numbers work accident frequency (F) and the number of work accidents severity (S) note that Sterilizer station that has the highest accident rate by 7 occupational accidents for four years with a severity of 343 days, while the JSA indicate that the station needed some proposed improvements Sterilizer form of repair machinery or equipment, personal protective equipment and alternative replacement of machinery or equipment that is more secure.

References

Suma’mur, P.K. 1989. Keselamatan Kerja Dan Pencegahan Kecelakaan. Haji Masagung, Jakarta.

Ridley, John. 2008. Kesehatan Dan Keselamatan Kerj. Penerbit Erlangga. Jakarta.

Kuswana, Wowo Sunaryo. 2014. Ergonomi dan K3 (Kesehatan Dan Keselamatan Kerja. PT. Remaja Rosdakarya, Bandung.

Ramli, Soehatman. 2010. Sistem Manajemen Keselamatan Dan Kesehatan Kerja OHSAS 18001. Dian Rakyat, Jakarta.

Dainur. 1992. Materi-materi Pokok Ilmu Kesehatan Masyarakat. Widya Medika. Jakarta.

Tarwaka. 2008. “Keselamatan Dan Kesehatan Kerjaâ€. Harapan Press, Surakarta.

Nur, Muhammad dan Chania, D., O. 2016.Pengaruh Pelaksanaan Program Keselamatan dan Kesehatan Kerja (K3) terhadap Produktivitas Kerja Karyawan pada PT. Bormindo Nusantara Duri. UIN Sultan Syarif Kasim Riau. [Online] Available http://ejournal.uin-suska.ac.id/index.php/jti/article/view/5576,

Nur, Muhammad dan Al, Anshari. 2015. Analisis Keselamatan Dan Kesehatan Kerja Terhadap Kinerja Karyawan PT. Johan Sentosa (PKS-Bangkinang). UIN Sultan Syarif Kasim Riau. [Online] Availablehttp://ejournal.uin-suska.ac.id/index.php/jti/article/view/6320,

Nur, Muhammad dan Afriani Putri. 2019. Usulan Perbaikan Sistem Manajemen Keselamatan dan Kesehatan Kerja (SMK3) sebagai Upaya Meminimalisir Angka Kecelakaan Kerja Mengguna kan Metode HAZOP (Studi Kasus: PT. XYZ).Institut Teknologi Kalimantan [Online] Available https://journal.itk.ac.id/index.php/sjt/article/view/152/74 diakses 13 September 2020.

Nur, Muhammad dan Suryandri Halbi. 2019. Analisa Lingkungan Kerja dan Kesehatan, Keselamatan Kerja (K3) pada Studi Kasus di PT. Asrindo Citraseni Satria. Institut Teknologi Kalimantan [Online]. Available https://journal.itk.ac.id/index.php/sjt/article/view/151/71.

Nur, Muhammad. 2018. Analisis Keselamatan dan Kesehatan Kerja Menggunakan Metode Hazard And Operability Study (HAZOP) Di PT. XYZ. UIN Sultan Syarif Kasim Riau. [Online] Available http://ejournal.uin-suska.ac.id/index.php/jti/article/view/6627/4663.

Nur, Muhammad dan Oki Ariwibowo. 2018. Analisis Kecelakaan Kerja dengan Menggunakan Metode FTA Dan 5s di PT. Jingga Perkasa Printing. UIN Sultan Syarif Kasim Riau. [Online] Available http://ejournal.uin-suska.ac.id/index.php/jti/article/view/6038.

Downloads

Published

2021-01-04

How to Cite

Nur, M., & sofian, sofian. (2021). USULAN PERBAIKAN SISTEM KESELAMATAN KERJA KARYAWAN BAGIAN PRODUKSI DENGAN MENGGUNAKAN METODE JOB SAFETY ANALYSIS (JSA) (Studi Kasus : PT. XYZ). Jurnal Teknik Industri Terintegrasi (JUTIN), 3(2), 28–36. https://doi.org/10.31004/jutin.v3i2.1350

Issue

Section

Articles of Research