Analisis Kualitas Udara serta Pemodelan AERMOD untuk Proyeksi Pola Penyebaran Emisi Genset PT. X
DOI:
https://doi.org/10.31004/jutin.v9i1.53790Keywords:
Ambient Air Quality, Noise, Generator Set, AERMODAbstract
Air quality is an important aspect in maintaining environmental sustainability in industrial work areas. In facilities that rely on backup power systems such as generator sets, emission release remains a potential source of air pollution, particularly during operation. This study investigates ambient air quality, noise levels, and models the potential dispersion of genset emissions at PT. X. Ambient air, emission, and noise measurements were conducted directly in the field. The results showed that all ambient air quality and noise parameters were below the applicable regulatory limits, with differences influenced by surrounding activities, location characteristics, and genset operation schedules. Dispersion modeling using AERMOD indicated that the highest pollutant concentrations occurred near the emission source and decreased with distance, influenced by wind direction and speed. The modeling results suggest that the environmental impact of genset emissions remains low and within acceptable limits.References
Amalia, S., & Wahyuni, I. R. (2022). Analisis Sulfur Dioksida (SO2) Udara Ambient Menggunakan Metode Pararosanilin dengan Spektrofotometer UV-Visible Kabupaten Bandung, Jawa Barat. Gunung Djati Conference Series, 15.
El Audah, M., Sukwika, T., Manajemen, M., Pascasarjana, S., & Audah, E. (2024). ANALISIS KEBISINGAN DAN KUALITAS UDARA PADA PROYEK KONSTRUKSI PEMBANGKIT LISTRIK TENAGA GAS UAP (PLTGU) MUARA TAWAR 650 MW. JAMBURA JOURNAL OF HEALTH SCIENCE AND RESEARCH, 6, 399–410. https://ejurnal.ung.ac.id/index.php/jjhsr/index
Firdausy, M. A., Mizwar, A., Khair, R. M., Nirtha, I., & Hamatha, N. (2020). PERBANDINGAN EMISI GAS BUANG YANG DIHASILKAN PADA PENERAPAN BIODIESEL DI PT ADARO INDONESIA COMPARISON OF EXHAUST GAS EMISSIONS PRODUCED ON BIODIESEL APPLICATION AT PT ADARO INDONESIA. Jukung Jurnal Teknik Lingkungan, 6(2), 147–156.
Ismahani, R., Anurogo, D. W., & Kunci, K. (2022). Pemodelan AERMOD Untuk Proyeksi Pola Penyebaran Emisi Heat Recovery Steam Generator PT X dan PT Y. Indonesian Journal of Conservation, 11(2), 51–63. https://doi.org/10.15294/ijc.v11i2.37953
Kurniawan, A. (2018). PENGUKURAN PARAMETER KUALITAS UDARA (CO, NO2, SO2, O3 DAN PM10) DI BUKIT KOTOTABANG BERBASIS ISPU. Jurnal Teknosains, 7(1), 1. https://doi.org/10.22146/teknosains.34658
Peraturan Menteri Lingkungan Hidup dan Kehutanan Nomor 11 Tahun 2021 tentang Baku Mutu Mesin dengan Pembakaran Dalam
Peraturan Pemerintah Nomor 22 Tahun 2021 tentang Penyelenggaraan Perlindungan dan Pengelolaan Lingkungan Hidup
Rahmadani, N., Fitri, Y., Retnawaty, S. F., Lestari, D., Mulyani, S., & Selvia, S. (2024). Pemodelan Emisi Gas CO2 dari Lokasi Tempat Pembuangan Akhir di Kota Pekanbaru menggunakan Dispersi AERMOD. Jurnal Wilayah Dan Lingkungan, 12(2), 163–176. https://doi.org/10.14710/jwl.12.2.163-176
SNI 19-7119.3-2017 tentang Udara Ambien - Bagian 3: Cara Uji Partikel Tersuspensi Total Menggunakan Peralatan High Volume Air Sampler (HVAS) dengan Metode Gravimetri
Winatama, D., Syarifudin, & Widayat. (2023). Analisis Kualitas Udara Pada Kawasan Transportasi, Industri,Perkotaan, Permukiman, dan Perdagangan di Kota Tegal. Jurnal Ilmu Lingkungan, 21, 381–386. https://doi.org/https://doi.org/10.14710/jil.21.2.381-386
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Vivi Indah Cahyani, Muhammad Faisal Fadhil
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
