Perbaikan Proses Produksi Pupuk untuk Mengurangi Tingkat Kecacatan
DOI:
https://doi.org/10.31004/jutin.v9i1.52433Keywords:
PDCA, pupuk granul, Kontrol Kualitas, SPC Method, Cacat ProdukAbstract
This study aims to reduce the defect rate in the production process of granule phosphate and potassium fertilizers at PT X, which includes undersize, oversize, and misshapen product defects. The PDCA method was employed as a quality improvement approach through the stages of Plan, Do, Check, and Action. Pareto Analysis, Histogram, and Fishbone Diagram were used to identify dominant defect types and determine their root causes, while corrective actions were focused on establishing new Standard Operating Procedures (SOP), providing operator training, and adding quality inspection checkpoints at each production stage. The results show a significant reduction in the average phosphate defect from 802 kg to 319 kg, successfully maintaining quality within control limits, and improved consistency in potassium fertilizer quality. This study recommends the implementation of continuous quality monitoring at every process stage to ensure high-quality products.References
Borucka, A., Kozłowski, E., Antosz, K., & Parczewski, R. (2023). A New Approach to Production Process Capability Assessment for Non-Normal Data. Applied Sciences (Switzerland), 13(11). https://doi.org/10.3390/app13116721
Damayant, K., Fajri, M., & Adriana, N. (2022). Pengendalian Kualitas Di Mabel PT . Jaya Abadi Dengan. 3(1), 1–6.
Fridayanti, A. M., & Wachidah, L. (2022). Siklus PDCA (Plan, Do, Check, Act) untuk Mengurangi Cacat Produk Sosis di PT.Serena Harsa Utama. Bandung Conference Series: Statistics, 2(2), 197–206. https://doi.org/10.29313/bcss.v2i2.3848
Gracia, R., & Bakhtiar, A. (2021). ANALISIS PENGENDALIAN KUALITAS PRODUK BAKERY BOX MENGGUNAKAN METODE STATISTICAL PROCESS CONTROL (STUDI KASUS PT. X) Rika Gracia *) , Arfan Bakhtiar.
Nadiyah, K., & Dewi, G. S. (2022). Quality Control Analysis Using Flowchart , Check Sheet , P-Chart , Pareto Diagram and Fishbone Diagram. 15(2), 183–188.
Prawirosentono, S. (2002). Filosofi Baru tentang Manajemen Mutu Terpadu Total Quality Management Abad 21. Bumi Aksara, 11–45.
Rahman, A. (2021). Manajemen Kualitas.
Shailesh Deorao, P. (2021). A Case Study on Demings Principle & Cycle with Just in Time for Manufacturing Mild Steel Pipe and Product Quality Improvement at Project Sites. International Journal of Science and Research (IJSR), 10(12), 792–796. https://doi.org/10.21275/sr211210105524
Shi, R. (2024). The PDCA(Plan-Do-Check-Act) Cycle’s Roles in Food Quality Improvement. Frontiers in Business, Economics and Management, 15(3), 431–440. https://doi.org/10.54097/zb9p6d79
Vargas, A. R. V., Alcaraz, J. L. G., Satapathy, S., & Diaz-Reza, J. R. (2023). The PDCA Cycle for Industrial Improvement: Applied Case Studies. https://doi.org/10.1007/978-3-031-26805-2
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Angga Eka Prasetia, Putu Eka Dewi Karunia Wati
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
