Analisis Penyebab Reject Sparepart Mesin Diesel Dengan Metode Fishbone dan FMEA pada PT. Kubota Indonesia
DOI:
https://doi.org/10.31004/jutin.v8i3.47195Keywords:
Product Defects, Fishbone Method, FMEA MethodAbstract
Quality is one of the important factors in the production process. Damaged or defective products cause significant losses to the company. In this study, defective products are products that do not meet the quality standards that have been set during the manufacturing process. When customers feel that the product cannot be used according to their needs, the product will be estimated as a defective product. This research uses the fishbone method, which is more comprehensive than other methods, because it can cover the causal factors of consequences clearly and in detail. Failure Mode and Effects Analysis (FMEA) method to evaluate the risk of failure at the production stage with a quantitative approach. With the application of these two methods, it is expected to analyze the problem quickly, precisely and focus on the cause effectively. Data is collected through direct observation (primary data) and interviews with employees (second data). The results of this study are expected to enable the company to identify and improve the quality of products to be produced in the future.References
Aldo, W., L Parulian, & D Yusi. (2022). Analisis cacat pada produk kemasan (karung) kedelai dengan menggunakan metode six-sigma dan fishbone diagram pada PT. FKS Multiagro tbk Surabaya. JENIUS : Jurnal Terapan Teknik Industri, 3(2), 149–158. https://doi.org/10.37373/jenius.v3i2.272
Arif Rahman; Surya Perdana. (2021). Analisis Perbaikan Kualitas Produk Carton Box di. 03(01), 33–37.
Aristriyana, E., & Ahmad Fauzi, R. (2023). Analisis Penyebab Kecacatan Produk Dengan Metode Fishbone Diagram Dan Failure Mode Effect Analysis (Fmea) Pada Perusahaan Elang Mas Sindang Kasih Ciamis. Jurnal Industrial Galuh, 4(2), 75–85. https://doi.org/10.25157/jig.v4i2.3021
Fishbone, D., Pada, D., Pembangunan, P., Tipe, R., Perumahan, D., & Permai, S. (2023). Evaluasi Sisa Material Konstruksi Menggunakan Metode Pareto. 21(85).
Nursyahbani, Z., Sari, T. E., & Winarno, W. (2023). Usulan Penurunan Kecacatan Piston Cup Forging Menggunakan Fishbone Diagram, FMEA dan 5W+1H di Perusahaan Spare-part Kendaraan. Go-Integratif : Jurnal Teknik Sistem Dan Industri, 4(01), 22–32. https://doi.org/10.35261/gijtsi.v4i01.8703
Noviani, E. F., Hilman, M., & Aristriyana, ; Eky. (n.d.). INTRIGA : INFO TEKNIK INDUSTRI GALUH Jurnal Mahasiswa Teknik Industri.
Produk, M., Pada, C., & Berlina, P. T. (2015). APLIKASI METODE SEVEN TOOLS DAN ANALISIS 5W + 1H UNTUK.
Saputra, A. (2022). Analisis Risiko Kerusakan Mesin ( Downtime ) Ripple Mill Stasiun Kernel ( Studi Kasus PT . Ujong Neubok Dalam ). 19(2), 241–247.
Yaqin, R. I., Zamri, Z. Z., Siahaan, J. P., Priharanto, Y. E., Alirejo, M. S., & Umar, M. L. (2020). Pendekatan FMEA dalam Analisa Risiko Perawatan Sistem Bahan Bakar Mesin Induk: Studi Kasus di KM. Sidomulyo. Jurnal Rekayasa Sistem Industri, 9(3), 189–200. https://doi.org/10.26593/jrsi.v9i3.4075.189-200
Yusri, A. Z. dan D. (2020). Analisis Penyebab Reject Pada Proses Mesin Diesel Di Bagian Tanki Bahan Bakar Dengan Menggunakan Metode Multi Attribute Failur Mode Analiysis (MAFMA) DI PT XYZ. Jurnal Ilmu Pendidikan, 7(2), 809–820.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Rama Anugrah Wibawa, Ridwan Hartono
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
