Analisis Maintenance pada Mesin Forming Menggunakan Metode Reliability Centered Maintenance di PT. Refindo Intiselaras
DOI:
https://doi.org/10.31004/jutin.v8i3.46891Keywords:
Forming machine, RCM, Reliability, Bearing; OperationAbstract
This research was conducted at PT. XYZ which is engaged in manufacturing, with a focus on forming machines. The purpose of this study was to analyze the maintenance system of forming machines using the Reliability Centered Maintenance (RCM) method, in order to improve machine reliability and reduce the frequency of damage. The results of the analysis showed that the bearing component had the highest RPN value of 224. The MTTF on the bearing machine was 312.39 hours. While the MTTR result was 213.2143. From these results, PT XYZ needs to conduct inspections about 1 month 2 times to increase the operational level of the forming machine, the addition of lubricants is also needed to reduce the frequency of failure in the bearing forming machine.References
Harahap, N. A. P., Al Qadri, F., Harahap, D. I. Y., Situmorang, M., & Wulandari, S. (2023). Analisis Perkkembangan Industri Manufaktur Indonesia. El-Mal: Jurnal Kajian Ekonomi & Bisnis Islam, 4(5), 1444–1450.
Robiansyah, A., Yusmaniarti, Y., Sari, I. K., Novrianda, H., & Irwanto, T. (2022). Analisis Perbandingan Model Altman, Springate, Zmijewski, Dan Grover Dalam Memprediksi Kebangkrutan Perusahaan Di Bursa Efek Indonesia (Studi Empiris Pada Perusahaan Manufaktur Yang Terdaftar Di Bursa Efek Indonesia Periode 2012-2017). EKOMBIS REVIEW: Jurnal Ilmiah Ekonomi Dan Bisnis, 10(S1), 25–36.
Alvarez-Alvarado, M. S., & Jayaweera, D. (2020). Reliability-based smart-maintenance model for power system generators. IET Generation, Transmission and Distribution, 14(9), 1770–1780.
Asmoro, N. D. A., & Widiasih, W. (2022). Analisis Keandalan Mesin untuk Meningkatkan Kinerja pada Mesin Extruder di PT. Rapindo Plastama. Journal of Industrial View, 4(2), 11–22.
Prasetyo, Y. T., & Mercado Rosita, K. K. (2020). Equipment Reliability Optimization Using Predictive Reliability Centered Maintenance: A Case-Study Illustration and Comprehensive Literature Review. 2020 7th International Conference on Frontiers of Industrial Engineering, ICFIE 2020, September, 93–97.
Pohan, F., Saputra, I., & Tua, R. (2023). Scheduling Preventive Maintenance to Determine Maintenance Actions on Screw Press Machine. Jurnal Riset Ilmu Teknik, 1(1), 1–12.
Rosyid, M. A., dan, & Indrayana, M. (2023). Penjadwalan Pemeliharaan Mesin Filling Bag Menggunakan Metode Reliability Centered Maintenance (RCM) di PT. SHGM. Prosiding Seminar Nasional Teknik Industri (SENASTI), 1, 294–303.
Samharil, F., Ismiyah, E., & Dhartikasari Priyana, E. (2022). Perancangan Pemeliharaan Mesin Filter Press dengan metode FMECA dan Reliability Centered Maintenance (RCM) (Studi Kasus PT. XYZ). Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 8(2), 335.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Agun Syahrul Frastyansyah, Aan Zainal Muttaqin, Doni Susanto
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
