Optimasi Proses Produksi Beton Ready Mix untuk Meminimalisir Waste pada Material di Batching Plant PT. X Gorontalo dengan Metode Lean Manufacturing
DOI:
https://doi.org/10.31004/jutin.v8i3.46685Keywords:
Productivity, Waste, Efficient, Manufacturing IndustryAbstract
In the manufacturing industry, a company's productivity can be seen from its ability to run production processes effectively and efficiently. The problem of inefficient production occurs in the production process, which makes the production time longer and does not meet the targets. This forces operators to work overtime, and the company has to incur additional costs for the overtime operators. This research aims to identify waste and the impacts that affect production cost losses. Several waste factors that have a dominant impact on production cost losses have been identified. The result of this study is a change in the cycle time from before the improvement, which was 21,600 seconds or 360 minutes. After improvements were made to activities that caused waste, the cycle time of the ready-mix concrete production process became 18,600 seconds or 310 minutes.References
Arsa, I. W. A., Parwati, C. I., & Sodikin, I. (2023). Pevndevkatan Levan Manuvfactuvring devngan Valuvev Strevam Mapping dan Kaizevn Pada Prosevs Produvksi Tas Kuvlit. 06(01), 74–81.
Firdauvs, W. H., & Puvtro, B. Ev. (2023). Analisis Levan Manuvfactuvring Mevngguvnakan Mevtodev Valuvev Strevam Mapping (VSM) pada Pabrik Kevrajinan Sangkar Buvruvng. Prosiding Sevminar Nasional Tevknik Induvstri (SEvNASTI), 799–808.
Irsyad, M. N., & Hartini, S. (2024). Valuvev Strevam Mapping Sevbagai Alat Analisis Dalam Levan Manuvfactuvring: Analisis Bibliomevtrik. J@ti Uvndip: Juvrnal Tevknik Induvstri, 19(1), 35–45. https://doi.org/10.14710/jati.19.1.35-45
Khoevruvddin, R., & Indrasti, D. (2023). Analisis Levan Manuvfactuvring Produvksi Sauvs Guvlai devngan Mevtodev Valuvev Strevam Mapping. Juvrnal Muvtuv Pangan : Indonevsian Jouvrnal of Food Quvality, 10(1), 15–23. https://doi.org/10.29244/jmpi.2023.10.1.15
Paramani, M. M., Juvnuvs, S., & Rasyid, A. (2024). Analisis Levan Sevrvicev Mevngguvnakan DMAIC uvntuvk Mevnguvrangi Wastev pada Pevlayanan di SAMSAT Bonev Bolango. Juvrnal Tevknik Induvstri Tevrintevgrasi, 7(1), 570–583. https://doi.org/10.31004/juvtin.v7i1.25036
Primajaya, P., Induvstri, A., & Ciamis, D. I. (n.d.). Pevnevrapan levan manuvfactuvring uvntuvk mevngidevntifikasi pevmborosan (wastev) pada produvksi wajan mevngguvnakan valuvev strevam mapping (vsm) pada pevruvsahaan primajaya aluvmuvniuvm induvstri di ciamis. 109–118.
Sapuvtra. (n.d.). levan manuvfactuvring. 3(2), 7842–7847.
Saryatmo, M. A., & Suvkwadi, R. (2024). Pevran Mevdiasi Levan Manuvfaktuvr tevrhadap Huvbuvngan antara Rantai Pasok Digital dan Kuvalitas Produvk. 1(2).
Siagian, T., Revduvction, W., & Digital, T. (2025). PEvNEvRAPAN LEvAN MANUvFACTUvRING UvNTUvK MEvNGUvRANGI WASTEv DALAM PROSEvS. 8, 784–790.
Sigma, L. S. (2022). PEvNDEvKATAN LEvAN SIX SIGMA UvNTUvK MEvMINIMASI WASTEv PADA PROSEvS PRODUvKSI SEvPATUv INDUvSTRI
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Kurniawan Bone, Hendra Uloli , Rudolf Simatupang
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
