Analisis Keseimbangan Lintasan Produksi dalam Upaya Mengurangi Waktu Tunggu pada Proses Produksi Kursi (Studi Kasus: UD. XYZ)
DOI:
https://doi.org/10.31004/jutin.v8i3.46550Keywords:
Ranked Positional Weight, Line Balancing, Region Approarch, Manufacturing IndustryAbstract
UD. Santoso Mandiri is a company engaged in the furniture industry and applies a make-to-order system in producing chairs. The company faces an imbalance in the production line, particularly at the bending and welding stations, which leads to work accumulation. This study aims to minimize delays at workstations to achieve a balanced production line. Data were collected through observation and interviews, then analyzed using the Ranked Positional Weight and Region Approach methods. The results showed that the Ranked Positional Weight method provided more optimal outcomes, with a proposed reduction in the number of workstations from five to three. The grouping of work elements was carried out based on priority order and completion time. As a result, line efficiency increased to 72.95%, while balance delay decreased to 27.05%. This study is expected to help create a more balanced workflow and reduce delays in the production process.References
Baroto, T. (2002). PERENCANAAN dan PENGENDALIAN PRODUKSI. Jakarta: Ghalia Indonesia.
Basunanda, Rachmad, and Thomas Priyasmanu. 2019. “Perencanaan Keseimbangan Produksi Guna Efisiensi Kinerja Di PT Saranajaya Serbaguna Malang.” Valtech 1 (1): 1–6.
Burhan, Burhan, Imron Rosyadi, and Rakhmawati. 2019. “Perancangan Keseimbangan Lintasan Produksi Untuk Mengurangi Balance Delay Dan Meningkatkan Efisiensi Kerja.” Performa 11(2): 75–84.
Farhandiaz, Rakan. Analisis Beban Kerja Pada Pembuatan Tutup Kotak Amunisi Dengan Metode Wla Untuk Pemberian Insentif Pekerja. Diss. Universitas Brawijaya, 2018.
Febriani, Winda Putri, Muhamad Alif Saputra, Dicky Setiawan, and Fernando Lumbanraja. 2020. “Penerapan Konsep Line Balancing Dalam Proses Produksi Pintu Dengan Metode Ranked Position Weight Di CV Indah Jati Permana.” Bulletin of Applied Industrial Engineering Theory 1(2): 54–59.
Fernando, F. (2021). ANALISIS PENERAPAN KESEIMBANGAN LINI (LINE BALANCING) PADA PROSES PERAKITAN BEJANA TEKAN GUNA MENINGKATKAN EFISIENSI DENGAN METODE RANKED POSITIONAL WEIGHT DI PT. SURYA BESINDO SAKTI (Doctoral dissertation, Institut Teknologi Indonesia).
Ginting, Rosnani. 2009. “Penjadwalan Mesin.” Graha Ilmu, 271.
Hilma Raimona Zadry, P. D. (2015). ANALISIS DAN PERANCANGAN SISTEM KERJA. Padang: Andalas University Press.
Jay Heizer, B. R. (2014). MANAJEMEN OPERASI: Manajemen Keberangsungan dan Rantai Pasokan. New Jersey: Salemba Empat.
Lubis, Fitriani Surayya, Nadya Syalsabila, and Misra Hartati. 2024. “Penerapan Line Balancing Untuk Mengurangi Waste Pada Proses Produksi Meja Menggunakan Metode RPW Dan VSM Pada Industri Furnitur,” 180–91.
Moonti, R, H Uloli, and A Rasyid. 2022. “Analisis Keseimbangan Lintasan Lini Produksi Tepung Kelapa Dengan Metode Ranked Positional Weight Dan Region Approach.” Jambura Industrial Review (JIREV) 2(1): 1–10. doi:10.37905/jirev.2.1.01-10.
Pradana, Aditya Yuda, and Farida Pulansari. 2021. “Analisis Pengukuran Waktu Kerja Dengan Stopwatch Time Study Untuk Meningkatkan Target Produksi Di Pt. Xyz.” Juminten 2 (1): 13–24. https://doi.org/10.33005/juminten.v2i1.217.
Riyanto, Agus, and Dilan Ramadhan Sofyan. 2019. “Perhitungan Waktu Baku Dan Simulasi Aliran Proses Produk Spare Part Di Cv. Grand Manufacturing Indonesia.” INAQUE: Journal of Industrial & Quality Engineering 7 (1): 10–18. https://doi.org/10.34010/iqe.v7i1.1736.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Bima Alfiono, Siti Mundari
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
