Usulan Perbaikan Fasilitas Kerja Ergonomis Berdasarkan Hasil Analisis Metode REBA pada Stasiun Pengemasan Bale
DOI:
https://doi.org/10.31004/jutin.v8i3.45862Keywords:
Ergonomic, Packaging Station, REBA, Work Facility Design, Anthopometric DataAbstract
PT. XYZ is a manufacturing company that produces cigarettes. There is a workstation that is still done manually, namely the packaging section. Work that is done manually can pose a risk to occupational health and safety. Initial observations show that every day there are workers who are absent due to fatigue and illness. Inappropriate working posture can cause fatigue and health problems. Analysis of the risk level of work posture using the REBA method. The results of the analysis of work posture with REBA showed scores of 5, 10, and 7 for each type of bale packaging work. This score indicates a high level of risk and the need for improvement in work posture. Improvement of work posture in this study was carried out by redesigning ergonomic work facilities with an anthropometry approach. Analysis using the REBA method was also carried out for work posture in the proposed work facility design with simulation. The results of the analysis showed a decrease in risk as indicated by REBA scores of 3, 6, and 5 for each type of bale packaging work.References
Canadian Canter of Occupational Health and Safety (CCOHS). (2019). Manual Material Handling (MMH) - Introduction. https://www.ccohs.ca/oshanswers/ergonomics/mmh/mmhintro.html
Dewantari, N. M., Oktaviani, K. S., Hafsa, L. R., Maulana, R., Rahmansyah, F. A., & Aldriansyah, T. B. (2024). Analisis Postur Kerja Dan Re-Desain Fasilitas Kerja Pada UMKM Bata Merah Top. Performa: Media Ilmiah Teknik Industri, 23(2), 151. https://doi.org/10.20961/performa.23.2.85279
Middlesworth, M. (2017). A Step-by-Step Guide Rapid Entire Body Assessment (REBA). www.ergo-plus.com
National Academy of Sciences. (2020). Selected health conditions and likelihood of improvement with treatment. National Academies Press.
Pratama, B. W. N., Herlianti, R., & Ikatrinasari, Z. F. (2024). Perancangan Meja Kerja Ergonomis Dengan Metode Antropometri pada Proses Inspection Checking Output Green Tire di Perusahaan X. Performa: Media Ilmiah Teknik Industri, 23(2), 141. https://doi.org/10.20961/performa.23.2.84759
Rajendran, M., Sajeev, A., Shanmugavel, R., & Rajpradeesh, T. (2021). Ergonomic evaluation of workers during manual material handling. Materials Today: Proceedings, 46, 7770–7776. https://doi.org/10.1016/j.matpr.2021.02.283
Rezki, A. S., Maksum, A. H., Herwanto, D., & Rahmat, M. T. (2023). Analisis Risiko Postur Kerja dengan Metode Nordic Body Map, RULA dan REBA pada Proses Manual Material Handling Pabrik Kecap. Jurnal Media Teknik Dan Sistem Industri, 7(2), 86. https://doi.org/10.35194/jmtsi.v7i2.2677
Wayan, I., Suarjana, G., Fikri Pomalingo, M., Palilingan, R. A., Parhusip, R., Program, ), Kesehatan, S. I., Universitas, M., & Manado, N. (2022). PERANCANGAN FASILITAS KERJA ERGONOMI MENGGUNAKAN DATA ANTROPOMETRI UNTUK MENGURANGI BEBAN FISIOLOGIS. In Jurnal Ilmiah Teknik Industri (Vol. 10, Issue 2).
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Mutiara Dicinta, Bellachintya Reira Christata, Bernadus Kristyanto
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
