PERNERAPAN ERGONOMI DI INDUSTRI KELAPA SAWIT MENGGUNAKAN METODE OVAKO WORKING ANALYSIS SYSTEM PADA STASIUN PERNYORTIRAN TBS (STUDI KASUS DI PT XYY)

Authors

  • Aris Fiatno Teknik Industri
  • Nur Aliza Teknik Industri

DOI:

https://doi.org/10.31004/jutin.v3i2.1345

Keywords:

ergonomics, workers, disease, safety and health.

Abstract

Harvesting, loading and sorting activities in palm oil industry that conducted manually have some risks that can cause musculoskeletal disorders (MSDs). This is happened due to repetitive of manual working, standing and bending position for 8 hours and 6 working days, this activity does not match the anthropometry of worker body. The analysis of the Nordic Body MAP questionnaire shows that the biggest complaints experienced by harvest workers are on the back (90%), right shoulder (60%), waist (15%), right calf (40%) the same as the forearm and left calf (30%). ).Work posture analysis using the OWAS method also supports the results of the NBM questionnaire analysis with the results of the analysis of the dominant bent shoulder attitude carried out by 68% (category 2), the attitude of the two arms is 53% (category 2) and the stance of the legs resting on both bent knees. 47% (category 3) with a combination of harvest posture code 4-2-2-2 (category 3).

References

Kasus, S., Pt, D. I. and Riau, X. P. (2018) ‘Sawit Menggunakan Metode Ovako Working Analysis System Dan Nordic Body Map Pada Stasiun Pemanenan Dan Penyortiran Tbs Risk Analysis of Working Posture in Palm Oil Industry Using Ovako Working Analysis System Method and Nordic Body Map in Harvesting and Se’, file:///D:/Tugas Akhir/new/1775-3300-1-SM (1).pdf, 24, pp. 1–11.

Samantha, Y. (2014) ‘PERANCANGAN MESIN PEMECAH KELAPA SAWIT KAPASITAS 1500 kg/jam’, J-Ensitec Yudi Samantha, ST., MT, 1(01). doi: 10.31949/j-ensitec.v1i01.17.

Setyanto, N. W. et al. (2015) ‘Ergonomics analysis in the scarfing process by owas, nios and nordic body map’ s method at slab steel plant’ s division’, international Journal of Innovative Research in Science, Engineering and Technology, 4(3), pp. 1086–1093. doi: 10.15680/IJIRSET.2015.0403060.

Siswiyanti, S. and Rusnoto, R. (2018) ‘Penerapan Ergonomi pada Perancangan Mesin Pewarna Batik untuk Memperbaiki Postur Kerja’, Jurnal Optimasi Sistem Industri, 17(1), p. 75. doi: 10.25077/josi.v17.n1.p75-85.2018.

Downloads

Published

2021-01-04

How to Cite

Fiatno, A., & Aliza, N. (2021). PERNERAPAN ERGONOMI DI INDUSTRI KELAPA SAWIT MENGGUNAKAN METODE OVAKO WORKING ANALYSIS SYSTEM PADA STASIUN PERNYORTIRAN TBS (STUDI KASUS DI PT XYY). Jurnal Teknik Industri Terintegrasi (JUTIN), 3(2), 1–5. https://doi.org/10.31004/jutin.v3i2.1345

Issue

Section

Articles of Research