ANALISIS RISIKO KECELAKAAN KERJA METODE HIRA (HAZARD IDENTIFICATION AND RISK ASSESSMENT) DI PT. X

Authors

  • Wita Afnella Fakultas Kesehatan Masyarakat, Universitas Islam Negeri Sumatera Utara
  • Tri Niswati Utami Fakultas Kesehatan Masyarakat, Universitas Islam Negeri Sumatera Utara

DOI:

https://doi.org/10.31004/prepotif.v5i2.2187

Keywords:

Hazard Identification, Risk Analysis, Risk Assessment

Abstract

The HIRA (Hazard Identification, Risk Assessment) method is a process of identifying hazards that occur in all company activities, then conducting a risk assessment of the hazards that occur. Introduction: Based on the initial survey conducted at PT. X, it was found that there were work accidents such as pinched hands, cuts, entanglement in processing machines which caused the risk of accidents. This research was conducted at PT.X in February-August 2021. Methods: This study used a descriptive qualitative method. This study analyzes the risk of work accidents using the HIRA (Hazard Identification, Risk Assessment) method which aims to identify hazards and conduct a risk assessment of these hazards. The research informants were 6 people consisting of 2 key informants and 4 main informants. Results: The results showed that there were 44 types of hazards from 8 work stations at PT. X. Among them, 16% have a small risk of harm (trivial), 38.6% have a tolerable risk, 34.1% have a moderate risk of harm, 4.5% have a substantial risk of harm, 6, 8% have an intolerable risk of harm. Conclusion: Risk analysis is a process by which hazards are identified and risks are estimated to assess the damage caused with the likelihood of damage occurring.

Author Biography

Wita Afnella, Fakultas Kesehatan Masyarakat, Universitas Islam Negeri Sumatera Utara

Fakultas Kesehatan Masyarakat

References

Gati, M. W., Wahyuni, I., & Ekawati, E. (2020). Analisis Penyebab Human Error Terhadap Kejadian Kecelakaan Pada Teknisi Di Perusahaan Otomotif X, Semarang. Jurnal Kesehatan Masyarakat …, 8(September), 665–671.

Halim, L. N., & Panjaitan, T. W. S. (2016). Perancangan Dokumen Hazard Identification Risk Assessment Risk Control (HIRARC) Pada Perusahaan Furniture: Studi Kasus. Jurnal Titra, 4(2), 279–284.

Jonathan. (2017). Analisis Bahaya Keselamatan Pada Pekerja Bagian Produksi Pabrik Minyak Kelapa Sawit PT PP London Sumatra Tbk Tanjung Morawa. Skripsi Program Studi Kesehatan Masyarakat.

Rehuel, Y. (2020). Identifikasi Bahaya, Penilaian Risiko, dan Pengendalian Risiko Menggunakan Analisis Metode HIRARC. Jurnal Penelitian Perawat Profesional, 1(November), 89–94. http://jurnal.globalhealthsciencegroup.com/index.php/JPPP/article/download/83/65

ILO. (2018). Occupational Risk Management And Occupational Safety And Health Management Systems. In European Agency for Safety and Health at Work (Nomor 465).

Kementerian Tenaga Kerja. (2018). Peraturan Menteri Tenaga Kerja No 5/2018 K3 Lingkungan Kerja. Permenakertrans, 5, 1–258.

Suma’mur. (2013). Keselamatan Kerja dan Pencegahan Kecelakaan. CV Haji Masagung.

Downloads

Published

2023-12-20

How to Cite

Afnella, W., & Utami, T. N. (2023). ANALISIS RISIKO KECELAKAAN KERJA METODE HIRA (HAZARD IDENTIFICATION AND RISK ASSESSMENT) DI PT. X. PREPOTIF : JURNAL KESEHATAN MASYARAKAT, 5(2), 1104–1012. https://doi.org/10.31004/prepotif.v5i2.2187