Analisis Komparatif Pengaruh Plasticizer Gliserol dan Sorbitol Terhadap Sifat Mekanik Film Bioplastik Berbasis Kitosan: Sebuah Pendekatan Meta-Analisis
DOI:
https://doi.org/10.31004/jutin.v9i1.54418Keywords:
Bioplastics, Chitosan, Glycerol, Sorbitol, Mechanical PropertiesAbstract
Chitosan bioplastics offer a sustainable alternative to synthetic packaging but suffer from inherent brittleness. This study employs a Systematic Literature Review (2015–2025) to comparatively analyze the effects of Glycerol and Sorbitol plasticizers on the mechanical properties of chitosan films. Meta-analysis results reveal a significant mechanical trade-off. Sorbitol-plasticized films demonstrate high Tensile Strength (41–75 MPa) with limited Elongation (<15%), making them suitable for rigid packaging. Conversely, Glycerol effectively enhances flexibility (Elongation up to 60%) but drastically reduces structural integrity (<25 MPa) and exhibits high hygroscopic sensitivity, positioning it as the preferred choice for flexible packaging. The study concludes that plasticizer selection must align with specific end-use requirements.References
Agus Dudung. (2018). Kompetensi Profesional Guru (Suatu Studi Meta-Analysis Desertasi Pascasarjana UNJ). JKKP (Jurnal Kesejahteraan Keluarga Dan Pendidikan), 5(1), 9–19. http://doi.org/10.21009/JKKP
Aripin, S., Saing, B., & Kustiyah, E. (2017). Studi_Pembuatan_Bahan_Alternatif_Plastik. Jurnal Teknik Mesin (JTM), 06(2), 79–84.
Ariska, R., Firmansyah, M. L., & Wulandari, S. (2016). Karakterisasi edible film dari pektin kulit pisang kepok (Musa paradisiaca L.) dengan penambahan kitosan dan gliserol. Jurnal Teknologi Dan Industri Pangan, 26(2), 123–130.
Arvanitoyannis, I., Kolokuris, I., Nakayama, A., Yamamoto, N., & Aiba, S. I. (2017). Physico-chemical studies of chitosan-poly(vinyl alcohol) blends plasticized with sorbitol and sucrose. Carbohydrate Polymers, 34(1–2), 9–19. https://doi.org/10.1016/S0144-8617(97)00089-1
Campos, M. G. N., Mei, L. H. I., & Santos, A. R. (2016). Sorbitol-plasticized and neutralized chitosan membranes as skin substitutes. Materials Research, 18(4), 781–790. https://doi.org/10.1590/1516-1439.025015
Dallan, P. R. M., Moreira, P. D. L., Petinari, L., Malmonge, S. M., Beppu, M. M., Genari, S. C., & Moraes, A. M. (2017). Effects of chitosan solution concentration and incorporation of chitin and glycerol on dense chitosan membrane properties. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 80(2), 394–405. https://doi.org/10.1002/jbm.b.30610
Dani, P. E., & Saputra, H. (2016). KARAKTERISASI PLASTIK BIODEGRADABLE DARI PATI LIMBAH KULIT PISANG MULI DENGAN PLASTICIZER SORBITOL. 2016.
De Cock, P., Mäkinen, K., Honkala, E., Saag, M., Kennepohl, E., & Eapen, A. (2016). Erythritol Is More Effective Than Xylitol and Sorbitol in Managing Oral Health Endpoints. International Journal of Dentistry, 2016. https://doi.org/10.1155/2016/9868421
Equilibria, J. P. (2016). Polymer-plasticizer compatibility during coating formulation: A multi-scale investigation. Open Archive Toulouse Archive Ouverte ( OATAO ), 508, 621–628. https://doi.org/10.4028/www.scientific.net/MSF.508.621
Fajriati. (2017). SINTESIS KOMPOSIT FILM KITOSAN - TiO2 MENGGUNAKAN SORBITOL SEBAGAI PLASTICIZER. 13(1), 75–94.
Firman, R. ; S. ; (2018). Pemanfaatan pati tapioka dan kitosan dalam pembuatan plastik biodegradable dengan penambahan gliserol sebagai plasticizer. Jurnal Litbang Industri, 2018(2), 73–81.
Gustiyani, & Muryeti. (2023). Pembuatan Edible Film Dari Pati Tapioka Dan Pektin Dari Kulit Jeruk Manis (Citrus Sinensis). Journal Printing and Packaging Technology, 3(1), 2023.
Habibi, R., & Artha Glory Romey Manurung. (2023). SLR Systematic Literature Review: Metode Penilaian Kinerja Karyawan Menggunakan Human Performance Technology. Journal of Applied Computer Science and Technology, 4(2), 100–107. https://doi.org/10.52158/jacost.v4i2.511
Ir. Zufri Hasrudy Siregar, S.T., M.Eng., C. E., Azhar Aras Mubarak, S.T., M. T., Yuvita Satriani Djuli, S.T., M. T., Hery Irwan, S.T., M.T., P., Dr. Ir. M. Ansyar Bora, S.T, M.T., I., Dr. Ir. Abdullah Merjani, S.T., M. T., M.T., I. A. A. D., Fahriadi Pakaya, M. T., & Firman Edi, S.T., M. T. (2024). Pengantar Teknik Mesin Dan Industri. Tri Edukasi Ilmiah. https://www.researchgate.net/profile/M-Bora/publication/392798780_Pengantar_Teknik_Mesin_dan_Industri/links/68538d6c26f43051a5817f64/Pengantar-Teknik-Mesin-dan-Industri.pdf
Lavorgna, M., Piscitelli, F., Mangiacapra, P., & Buonocore, G. G. (2016). Study of the combined effect of both clay and glycerol plasticizer on the properties of chitosan films. Carbohydrate Polymers, 82(2), 291–298. https://doi.org/10.1016/j.carbpol.2010.04.054
Malek Ali. (2017). Synthesis and Characterization of the Composite Material PVA/Chitosan/5% Sorbitol with Different Ratio of Chitosan .pdf. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS. https://www.researchgate.net/profile/Abderraouf-Gherissi/publication/317213868_Synthesis_and_characterization_of_the_composite_material_PVAChitosan5_sorbitol_with_different_ratio_of_chitosan/links/5b02a7b4a6fdccf9e4f6ec95/Synthesis-and-characterization-of
Mohamed, R., Ghazali, M., & Samsudin, M. A. (2020). A Systematic Review on Mathematical Language Learning Using PRISMA in Scopus Database. Eurasia Journal of Mathematics, Science and Technology Education, 16(8), 1–12. https://doi.org/10.29333/ejmste/8300
Muhibbin, M. A., & Hendriani, W. (2021). Challenges and Strategies of Inclusive Education in Higher Education in Indonesia: Literature Review. JPI (Jurnal Pendidikan Inklusi), 4(2), 92.
Nisah, K. (2018). STUDY PENGARUH KANDUNGAN AMILOSA DAN AMILOPEKTIN UMBI-UMBIAN TERHADAP KARAKTERISTIK FISIK PLASTIK BIODEGRADABLE DENGAN Plastizicer GLISEROL. BIOTIK: Jurnal Ilmiah Biologi Teknologi Dan Kependidikan, 5(2), 106. https://doi.org/10.22373/biotik.v5i2.3018
Purwanti, A. (2017). Analisis Kuat Tarik dan Elongasi Plastik Kitosan Terplastisasi Sorbitol. Jurnal Teknologi, 3(2), 99–106.
Rethlefsen, M. L., & Page, M. J. (2022). PRISMA 2020 and PRISMA-S: common questions on tracking records and the flow diagram. Journal of the Medical Library Association, 110(2), 253–257. https://doi.org/10.5195/jmla.2022.1449
Saputra, E. (2016). Penggunaan Edible Film dari Chitosan dengan Plasticizer Karboksimetilselulosa (CMC) Sebagai Pengemas BurgerLele Dumbo. Program Studi Teknik Kimia, Fakultas Teknik, UPN Veteran Jawa Timur, 13(1), 59–65. https://core.ac.uk/download/pdf/234615593.pdf
Siregar, Z. H., Harahap, U. N., & SR, M. Z. (2020). Perencanaan Bahan Baku Menggunakan Metode Min-Max pada PT. Pacific Palmindo Industri . TALENTA Conference Series : Energy & Engineering, 3(2), 757–764. https://doi.org/10.32734/ee.v3i2.1073
Suryadri, H., Andriani, R., D, M. G. A., & Damris, M. (2021). Perbandingan penambahan CMC dan sorbitol dengan penambahan gelatin dan gliserol terhadap edible film yang terbuat dari limbah cair tahu. 5(2), 93–104.
Susilowati, E., Kartini, I., Santosa, S. J., & Triyono. (2016). Effect of glycerol on mechanical and physical properties of silver-chitosan nanocomposite films. IOP Conference Series: Materials Science and Engineering, 107(1). https://doi.org/10.1088/1757-899X/107/1/012041
Yustinah, Noviyanti, S., Hasyim, U. H., & Syamsudin, A. B. (2019). Pengaruh Penambahan Kitosan dalam Pembuatan Plastik Biodegradable dari Rumput Laut Gracilaria sp dengan Pemlastik Sorbitol. Seminar Nasional Sains Dan Teknologi, 1–6.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Anggi Sundari Tubagus Said, Putri Purnama Sari
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
