Pemanfaatan limbah kulit udang sebagai bahan baku biopolimer dalam injeksi polimer
DOI:
https://doi.org/10.31004/jutin.v8i1.41259Keywords:
Shrimp shell, Chitosan, Viscosity, Viscosity; Adsorption, Polymer InjectionAbstract
The amount of shrimp shell waste is quite abundant in Indonesia, but its utilization is not optimal. Shrimp shells contain chitin that can be processed into chitosan. Chitosan polymer can be developed for Enhanced Oil Recovery. Testing the characteristics of shrimp shell chitosan has been carried out, but the recovery factor results in coreflooding are still very small. Additional characteristic tests such as adsorption tests are needed. This study was conducted to determine the characteristics of shrimp shell chitosan polymers by conducting tests such as compatibility tests, viscosity, adsorption. In this study, an experiment was conducted using biopolymer-chitosan with shrimp shell raw materials. The material for making formation water used NaCl with a salinity of 10,000 and 20,000 mg/L. The concentration of chitosan biopolymer was varied with 5,000, 10,000, and 15,000 mg/L. The size of the sand grains used was 60 mesh. The results of the tests that had been carried out all samples were declared compatible for use. The highest viscosity value was 1,055.19 cP and adsorption was 26.63 mg/g.References
Agi, A., Junin, R., Gbonhinbor, J., & Onyekonwu, M. (2018). Natural polymer flow behaviour in porous media for enhanced oil recovery applications: a review. In Journal of Petroleum Exploration and Production Technology (Vol. 8, Issue 4, pp. 1349–1362). Springer Verlag. https://doi.org/10.1007/s13202-018-04347
Darmapala. (2019). Prosiding DENGAN CHEMICAL EOR MELALUI PEMANFAATAN SURFAKTAN. Seminar Nasional Kimia Dan Pembelajarannya (SNKP) 2019, November, 135–191.
Dong, H., Hong, Y., Rui, W., & Fan, D. (2006). The effect of wettability on oil recovery of alkaline/surfactant/polymer flooding. Proceedings - SPE Annual Technical Conference and Exhibition, 4, 2396–2403. https://doi.org/10.2118/102564-ms
Fathaddin, M. T. (2021). Penerapan Model Isotermal untuk Adsorpsi Statik Xanthan pada Batuan Pasir untuk Berbagai Salinitas. In Jurnal Offshore (Vol. 5, Issue 1).
Green, D. W., & Willhite, G. P. (2018). Enhanced Oil Recovery (2nd ed.). Society of Petroleum Engineers.
Hasri. 2010. Prospek Kitosan dan Kitosan Termodifikasi Sebagai Biopolimer Alami yang Menjanjikan.
Huljannah, M., Lestari, F. A., & Erfando, T. (2020). Studi Awal Pemanfaatan Rumput Laut dan Daun Cincau Hijau Sebagai Kandidat Bahan Alternatif untuk Injeksi Polimer EOR. Jurnal Teknik, 41(3), 246–252. https://doi.org/10.14710/teknik.v41n3.28148
Lestari, F. A., Afdhol, M. K., Fiki, H., & Tomi, E. (2020). Biopolimer dari Bahan Organik sebagai Biopolimer pada Metode EOR. Lembaran Publikasi Minyak Dan Gas Bumi, 54(3), 149–157. https://doi.org/10.29017/lpmgb.54.3.568
Maifra K., H., Fathaddin, M. T., & Setiati, R. (2021). Peningkatan Perolehan Minyak Bumi dengan Polimer Superabsorben Selulosa dari Ampas Tebu. Kocenin Serial Konferensi, 1(1), 1–6.
Novriansyah, A. (2014). Pengaruh Penurunan Permeabilitas Terhadap Laju Injeksi Polimer Pada Lapangan Y. Journal of Earth Energy Engineering, 3(1), 25–30. https://doi.org/10.22549/jeee.v3i1.93
Putra, B. P., & Kiono, B. F. T. (2021). Mengenal Enhanced Oil Recovery (EOR) Sebagai Solusi Meningkatkan Produksi Minyak Indonesia. Jurnal Energi Baru Dan Terbarukan, 2(2), 84–100. https://doi.org/10.14710/jebt.2021.11152
Saputra, R. T. 2021. Uji Laboratorium Karakteristik Polimer Kitosan untuk enhanced Oil Recovery
Setiati, R., Siregar, S., Wahyuningrum, D., & Fathaddin, M. T. (2021). POTENSI KEBERHASILAN KULIT UDANG SEBAGAI BAHAN DASAR POLIMER KITOSAN: STUDI LITERATUR. JURNAL PENELITIAN DAN KARYA ILMIAH LEMBAGA PENELITIAN UNIVERSITAS TRISAKTI, 6(1), 156–164. https://doi.org/10.25105/pdk.v6i1.8637
Setiati, R., Siregar, S., Wahyuningrum, D., & Rinanti, A. (2021). Synthesis method of chitin become chitosan polymer from shrimp shells for enhanced oil recovery. IOP Conference Series: Earth and Environmental Science, 737(1). https://doi.org/10.1088/1755- 1315/737/1/012048
Tanasale, M. F. J. D. P., Killay, A., & Laratmase, M. S. (2012). Kitosan dari Limbah Kulit Kepiting Rajungan (Portunus sanginolentus L.) sebagai Adsorben Zat Warna Biru Metilena. Jurnal Natur Indonesia, 14(1), 165. https://doi.org/10.31258/jnat.14.1.165-171
Temizel, C., Putra, D., Peksaglam, Z., Susuz, O., Balaji, K., Suhag, A., Ranjith, R., & Zhang, M. (2016). Production optimization under injection of biopolymer, synthetic polymer and gels in a heterogeneous reservoir. SPE Eastern Regional Meeting, 2016-Janua. https://doi.org/10.2118/184079-MS
Tobing, E. M. (2012). Pengaruh adsorpsi statik batuan reservoir minyak terhadap viskositas polimer polyacrylamide. Pusat Penelitian Dan Pengembangan Teknologi Minyak Dan Gas Bumi “LEMIGAS,” 10(2), 91–98.
Tobing, E. M. L., & Eni, H. (2012). Peningkatan Perolehan Reservoir Minyak “R” dengan Injeksi Alkali-Surfaktan-Polimer pada Skala Laboratorium. Pusat Penelitian Dan Pengembangan Teknologi Minyak Dan Gas Bumi “LEMIGAS, 1–12.
Wicaksono, H., Sutijan, & Yuliansyah, A. T. (2015). Karakterisasi larutan polimer KYPAM HPAM untuk bahan injeksi dalam enhanced oil recovery (EOR). Jurnal Rekayasa Proses, 9(1), 9–15.
Yasahardja, Y., Setiawan, A., & Prihantini, A. (2017). Studi Awal Pemilihan Polimer Untuk Digunakan Pada Injectivity Dengan Skala Laboratorium (Vol. 1, Issue 2). Desember
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Baiq Maulinda Ulfah, Muh Taufiq Fathaddin, Dyah Rini Ratnaningsih
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
