Rancang Bangun Mesin Pemotong Adonan Amplang Menggunakan Metode Nordic Body Map (NBM) dan Rapid Upper Limb Assessment (RULA) di PT Dzakira Citra Mandiri
DOI:
https://doi.org/10.31004/jutin.v9i1.54356Keywords:
Anthropometry, Design and Development, Dough Cutting Machine, NBM, RULAAbstract
The amplang dough cutting process at PT Dzakira Citra Mandiri was initially carried out manually using a non-ergonomic working posture, such as a bent body position and repetitive hand movements. These conditions potentially cause musculoskeletal complaints and increase ergonomic risks for operators. The initial evaluation using the Nordic Body Map (NBM) method showed a total complaint score of 145, which falls into the high-risk category, while the Rapid Upper Limb Assessment (RULA) resulted in a score of 6, indicating the need for immediate improvement. This study aims to design an ergonomically based amplang dough cutting machine by applying the NBM and RULA methods, as well as workers’ anthropometric data, to determine appropriate machine dimensions. The design process was conducted using CATIA software to produce a machine configuration that matches workers’ physical characteristics. After implementation, a re-evaluation showed a reduction in the NBM score to 77, classified as low risk, and a decrease in the RULA score to 4. In addition, the use of the machine improved work efficiency and ensured consistent amplang cutting sizes in accordance with production standards.References
Anandya, U. (2025). Perancangan mesin dough divider dengan mempertimbangkan aspek ergonomi dan ekonomi di UMKM “Kisah Roti” Magelang (Doctoral dissertation). Universitas Islam Sultan Agung Semarang.
Aprillova, C. V. C., & Ekoanindyo, F. A. (2024). Design of a semi-automatic banana chips slicing machine to reduce musculoskeletal disorders (MSDs) in workers. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 10(1), 1–6. http://dx.doi.org/10.24014/jti.v10i1.28383
Chalifatunnisa, D., & Ramdhani, S. (2025). Evaluasi postur kerja pemotongan tahu menggunakan metode RULA di UMKM Handayani. Jurnal Teknik, 23(1), 242–251. https://doi.org/10.37031/jt.v23i1.623
Hudaningsih, N., Rahman, D., & Jumari, I. A. (2021). Analisis postur kerja pada saat mengganti oli mobil menggunakan metode Rapid Upper Limb Assessment (RULA) dan Rapid Entire Body Assessment (REBA) di Bengkel Barokah Mandiri. Jurnal Industri dan Teknologi Samawa, 2(1), 6–10. https://doi.org/10.36761/jitsa.v2i1.1018
Kusumadewi, I., Budiman, & Rohman, R. T. (2022). Ergonomic work facility design using anthropometric data. Journal of Mechanical and Manufacture, 9(1), 18–24.
Masudha, E. M., Sulistyowati, E., & Stighfarrinata, R. (2024). Identifikasi ergonomi postur kerja menggunakan metode Nordic Body Map (NBM) dan REBA di UMKM furnitur. Jurnal Teknologi dan Manajemen Sistem Industri, 3(2), 114–128.
Purba, Y. S., & Lestari, P. W. (2020). Berat beban tas dengan keluhan musculoskeletal pada siswa SMA. Holistik Jurnal Kesehatan, 14(4), 606–614. https://doi.org/10.33024/hjk.v14i4.3061
Praditya, B., & Ardiansyah, F. A. E. (2023). Perancangan alat penyangrai biji melinjo menggunakan metode RULA (Rapid Upper Limb Assessment) di UMKM Melinjo Sukorejo. Jurnal Teknik Industri, 9(2), 521–528.
Rahdiana, N. (2017). Identifikasi risiko ergonomi operator mesin potong guillotine dengan metode Nordic Body Map (studi kasus di PT XYZ). IndustryXplore, 2(1), 1–12.
Silviana, S., Hardianto, A., & Hermawan, D. (2022). The implementation of anthropometric measurement in designing the ergonomics work furniture. EUREKA: Physics and Engineering, (3), 20–27. https://doi.org/10.21303/2461-4262.2022.001967
Syarif, A. A., Harahap, I. F., & Hasibuan, Y. M. (2024). Perancangan alat bantu pengiris singkong otomatis untuk menurunkan risiko cedera menggunakan metode RULA dan REBA. Jurnal Optimasi Teknik Industri (JOTI), 6(1), 15–22. http://dx.doi.org/10.30998/joti.v6i1.21303
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Silvia Uslianti, Titania Putri, Tri Wahyudi, Riadi Budiman, Ratih Rahmahwati
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
