Perencanaan Keselamatan dan Kesehatan Kerja (K3) pada CV. Kurnia Agung Buayan dengan Metode Hazard And Operability Study (HAZOP)
DOI:
https://doi.org/10.31004/jutin.v9i1.52808Keywords:
Occupational safety, Accident risk, Tire retreading, HAZOP, Hazard controlAbstract
This study aims to identify potential hazards, their sources, and the level of occupational accident risk in the tire retreading process at CV. Kurnia Agung Buayan using the Hazard and Operability Study (HAZOP) method. This method systematically identifies possible deviations in work activities and evaluates their impacts. Data were collected through observation, interviews, and documentation. The analysis found 13 potential work accidents categorized as 1 extreme, 4 high, 5 moderate, and 3 low risks. The main risks include accidents caused by machine fragments, cutter use without PPE, and direct contact with high-temperature machines. Recommended controls include the use of PPE, OHS training, preparation of standard operating procedures (SOPs), and improvements in workplace layout and conditions. The results are expected to serve as a reference for improving the company’s safety system, reducing accidents, and increasing employee productivity.References
Ahmad Fauzan, & Andung Jati Nugroho. (2024). Analisis Keselamatan Dan Kesehatan Kerja (K3) Menggunakan Metode Hazard and Operability Study (Hazop) Di Pt. Roda Pasifik Mandiri. Jurnal Ilmiah Nusantara, 1(5), 73–84.
Basri, M. R. (2024). ANALISIS POTENSI BAHAYA DENGAN MENGGUNAKAN METODE HAZOP (HAZARD AND OPERABILITY STUDY) PADA BAGIAN PRACETAK (Studi Kasus: PT …. 7(1), 129–137.
Dwiansyah, P., & Kusnadi, K. (2023). Usulan Pengendalian Risiko Keselamatan Dan Kesehatan Kerja Menggunakan Metode HIRARC di PT Buana Niaga Bersama. Jurnal Serambi Engineering, 8(2), 5817–5824.
Ernita, T., Jauhari, G., & Yeza, D. M. (2019). Perbaikan Sikap Kerja untuk Mengatasi Keluhan Akibat Beban Kerja pada Proses Panas Vulkanisir Ban di PT. Inti Vulkatama. Jurnal Pendidikan Teknologi Kejuruan, 2(4), 134–139.
Labib, D., & Ayudyah Eka Apsari. (2024). Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Menggunakan Metode Failure Metode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta). Jurnal Ilmiah Teknik Industri Dan Inovasi, 2(1), 45–64.
Muhammad Nur Wahyu Hidayah, Galih Mahardika Munandar, Sawiji, & Imam Samsul Maarif. (2025). Analisis Ergonomi Lingkungan Kerja pada UMKM Sablon. Jurnal Teknologi Dan Manajemen Industri Terapan, 4(3), 969–975.
Nur, M., Hidayah, W., Muanandar, G. M., & Dicasani, A. (2024). Perbaikan Posisi Dan Postur Pekerja Pada Mekanik Bengkel Mobil. 3(3).
Patradhiani, R., Amelia, M., & Rosyidah, M. (2022). Pengaruh Keselamatan Kesehatan Kerja Terhadap Produktivitas Karyawan Dengan Metode Partial Least Square. Jurnal Teknik Industri: Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 8(2), 305.
Qurthuby, M., Satriardi, S., & Hendra Saputra, Y. (2024). Analisis Resiko K3 Pekerja Menggunakan Metode Hazard and Operablity (HAZOP). Jurnal Surya Teknika, 11(1), 273–278.
Syadzwina, D. N., Hukum, F., Jember, U., Amri, A. I., Hukum, F., & Jember, U. (2024). PERBANDINGAN HUKUM PERKEMBANGAN PERSEKUTUAN KOMANDITER ( COMMANDITAIRE VENOOTSCHAAP ) DI INDONESIA DAN BELANDA. 12(8), 1904–1920.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Widya Anggrianita Ramadhani, Muhammad Nur Wahyu Hidayah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
