Comparative Analysis of Cloves Drying Machines

Authors

  • Mansyur Mansyur Universitas Negeri Makassar
  • Andi Muhammad Taufik Ali University of Makassar
  • Syakia Muflihat University of Makassar

DOI:

https://doi.org/10.31004/jutin.v8i4.51672

Keywords:

Drying machine, cloves, comparative study, efficiency

Abstract

This research addresses the critical need to systematically benchmark the efficiency of modern drying machine to upgrade the prevailing traditional method for drying cloves. The main objective of this investigation was to analyze comparative efficiency between electric and biomass dryig machine and provide recommendations for the most optimal type of drying machine based on energy consumption, drying time and final moisture content. This study using comparatibe experimental design with controlled cloves samples to collect data and applied one-way ANOVA test for the statictical analysis of significant differences betweeen the machines. The results confirmed that the electric drying machine achieves greates overall efficiency and optimality, providing faster processing times without diminishing the basic quality or final moisture content of the cloves.

References

Anggara, F. S. D., Ilham, M. M., & ... (2021). Rancang Bangun Sistem Pemanas Mesin Pengering Cengkeh. Prosiding SEMNAS …, 95–100. https://proceeding.unpkediri.ac.id/index.php/inotek/article/view/1086%0Ahttps://proceeding.unpkediri.ac.id/index.php/inotek/article/download/1086/697

Johanes, S., & Winarto, F. E. W. (2016). Studi Efisiensi Termal Proses Pengeringan Cengkeh Pada Alat Pengering Yang Memiliki Lima Tingkat Tray. Universitas Gajah Mada.

Latif, L. A., & Tjiroso, B. (2020). Perancangan Dan Pembuatan Alat Pengering Cengkeh Berbahan Bakar Biomassa. Patria Artha Technological Journal, 4(2), 109–112. https://doi.org/10.33857/patj.v4i2.357

Prayuda, F., Kabib, M., & Hudaya, A. Z. (2022). Proses Manufaktur Mesin Pengering Cengkeh Rajangan Dengan Sistem Pemanas Heater. Jurnal Crankshaft, 5(2), 1–10. https://doi.org/10.24176/crankshaft.v5i2.7641

Saputra, R. A., Ilham, M. M., & Fauzi, S. (2021). Rancang Bangun Sistem Penggerak Mesin Pengering Cengkeh Kapasitas 15 Kg. Seminar Nasional Inovasi Teknologi, 95–100.

Simbolon, E., Alfredo, J., Kaligis, B. S., Pomalingo, M. F., Piri, I. D., & Kawuwung, S. V. C. (2022). Desain dan Pabrikasi Mesin Pengering Cengkeh Berbahan Bakar Limbah Kelapa Untuk Mempercepat Proses Penjemuran Cengkeh. Jurnal Keteknikan Pertanian Tropis Dan Biosistem, 10(1), 21–28. https://doi.org/10.21776/ub.jkptb.2022.010.01.03

Tarigan, E. (2020). Pengering tenaga surya dengan sistem bekap tenaga biomassa untuk pengeringan hasil pertanian. Teknota: Jurnal Industri Teknologi Pertanian, 14(1), 31–36.

Yultrisna, Y., Angraini, T., & Gani, O. F. (2017). Rancang Bangun Alat Pengeringan Cengkeh Dengan Sistem Peringatan Suara. Elektron : Jurnal Ilmiah, 9(2), 5–12. https://doi.org/10.30630/eji.9.2.89

Downloads

Published

2025-10-20

How to Cite

Mansyur, M., Ali, A. M. T., & Muflihat, S. (2025). Comparative Analysis of Cloves Drying Machines. Jurnal Teknik Industri Terintegrasi (JUTIN), 8(4), 4474–4479. https://doi.org/10.31004/jutin.v8i4.51672

Issue

Section

Articles of Research

Similar Articles

<< < 17 18 19 20 21 22 23 24 25 26 > >> 

You may also start an advanced similarity search for this article.