Analisis Pengendalian Kualitas dengan Menggunakan Metode Fault Tree Analysis (FTA) dan Failure Mode and Effect Analysis (FMEA) untuk Mengurangi Produk Cacat Klem Accu di IKM Geulis Automotif
DOI:
https://doi.org/10.31004/jutin.v8i3.48228Keywords:
FTA, FMEA, Quality Control, Defective ProductAbstract
his study aims to identify and reduce defects in battery clamp products at Geulis Automotif SME by applying Fault Tree Analysis (FTA) and Failure Mode and Effect Analysis (FMEA) methods. Defect data from January to December 2024 show an average defect rate of 10.74%, with the most dominant types being dents and holes. FTA was used to systematically identify root causes, while FMEA evaluated risk levels using the Risk Priority Number (RPN). The highest RPN value reached 160, caused by poor-quality solder material. The analysis produced improvement recommendations including raw material inspection, solder filtering, mold maintenance, and enhancing operator focus through task rotation and daily briefings. The combined use of FTA and FMEA proved effective in minimizing failure risks and improving the overall quality of battery clamp production.References
Farrizqi, M. D., & Deny, A. (2024). Analisis Pengendalian Kualitas dengan Menggunakan Metode Failure Mode and Effect Analysis dan Fault Tree Analysis pada Produk Songkok UD. XYZ. G-Tech: Jurnal Teknologi Terapan, 8(2), 835–846. https://doi.org/10.33379/gtech.v8i2.4052
Fesa, P. K. Y. N. U. (2024). Pengendalian Kualitas (Andriyanto (ed.)). Lakeisha.
Fitriana, R., & Permata, S. I. (2023). Peningkatan Kualitas Proses Produksi Tahu Menggunakan Metode Fmea Dan Fta (Studi Kasus: Pabrik Tahu Dn). Jurnal Teknologi Industri Pertanian, 33(3), 277–289. https://doi.org/10.24961/j.tek.ind.pert.2023.33.3.277
Krisnaningsih, E., Pugy, G., & M., F. K. S. (2021). Usulan Perbaikan Kualitas Dengan Menggunakan Metode Fta Dan Fmea. Jurnal InTent, 4(1), 41–54.
Kurniawan, W., Kemala, S. D., & Fira, S. (2022). Perbaikan Kualitas Menggunakan Metode Failure Mode and Effect Analysis Dan Fault Tree Analysis pada Produk Punch Extruding Red di PT. Jaya Mandiri Indotech. EKOMBIS REVIEW: Jurnal Ilmiah Ekonomi dan Bisnis, 10(1), 152–166. https://doi.org/10.37676/ekombis.v10i1.1748
Muflihah, N., Irawan, P. A., & Syaichu, A. (2024). Analisis Kegagalan dan Usulan perbaikan Produk Air Minum dalam Kemasan ( AMDK ) menggunakan FMEA dan. 09(October), 141–154.
Ridwan, W., Widiastuti, R., & Nurhayati, E. (2023). Analisis Pengendalian Kualitas Bibit Sawit Dengan Menggunakan Metode Fault Tree Analysis (FTA) dan Metode Failutre Mode Effect Analysis (FMEA) di PT. Kapuas Sawit Sejahtera. Reslaj : Religion Education Social Laa Roiba Journal, 5(6), 3730–3738. https://doi.org/10.47467/reslaj.v5i6.2741
Syahkhaafi, M., & Ratnasari, L. (2023). Upaya Peningkatan Kualitas Produk Corrugated Box dengan Pendekatan Fault Tree Analysis (FTA) dan Failure Mode and Effect Analysis (FMEA). Jurnal Teknik Industri Terintegrasi, 6(4), 1212–1222. https://doi.org/10.31004/jutin.v6i4.20250
Wicaksono, A., & Ferida, Y. (2022). Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ. Jurnal Teknologi dan Manajemen Industri Terapan, 1(3), 145–154. https://doi.org/10.55826/tmit.v1iiii.44
Yafi, M. M., Denny, M., & Cahyono, N. (2024). Perbaikan Kualitas dengan Metode Fault Tree Analysis ( FTA ) dan Failure Mode And Effect Analysis ( FMEA ) pada Industri Garam Di Jawa Timur The Implementation of Fault Tree Analysis ( FTA ) dan Failure Mode And Effect Analysis ( FMEA ) to Improve the Qua. 06(1), 94–102.
Zakaria, T., Juniarti, A. D., Dan, B., & Setyo, B. (2023). Analisis Pengendalian Kualitas Cacat Dimensi Pada Header Boiler Menggunakan Metode Fmea Dan Fta. Jurnal InTent, 6(1), 24–36.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Dea Rahma Yunita, Rikzan Bachrul Ulum, Priyo Ari Wibowo
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
