Analisis Kinerja Mesin Ring Frame Spinning 5 Menggunakan Metode Overall Equipment Effectiveness (OEE) dan Six Big Losses pada PT Indorama Synthetics Tbk.
DOI:
https://doi.org/10.31004/jutin.v8i3.48215Keywords:
Overall Equipment Effectiveness (OEE), Six Big Losses, Diagram Fishbone, diagram pareto., 5W+1HAbstract
This study aims to analyze the performance of the Ring Frame Spinning 5 machine at PT. Indorama Synthetics Tbk using the Overall Equipment Effectiveness (OEE) method and Six Big Losses approach. The research was conducted quantitatively using data from September 2024 to February 2025. The analysis showed that the average OEE value was 83.476%, which is below the World Class OEE standard of 85%. The highest losses were identified in Idling & Minor Stoppage (20.72%) and Reduced Speed Losses (24.56%). The root causes of these losses were analyzed using fishbone diagrams and the 5W + 1H method, focusing on factors such as manpower, machines, methods, materials, and the production environment. Recommended improvements include operator training, SOP implementation, scheduled machine component replacement, and environmental control in the production area.References
Ahdiyat, T., & Nugroho, Y. A. (2022). ANALISIS KINERJA MESIN BANDSAW MENGGUNAKAN METODE OVERALL EQUIPMENT EFFECTIVENESS (OEE) dan SIX BIG LOSSES PADA PT QUARTINDO SEJATI FURNITAMA. Jurnal Cakrawala Ilmiah, 2(1), 221–234. https://doi.org/10.53625/jcijurnalcakrawalailmiah.v2i1.3509
Aristriyana, E., & Ahmad Fauzi, R. (2023). Analisis Penyebab Kecacatan Produk Dengan Metode Fishbone Diagram Dan Failure Mode Effect Analysis (Fmea) Pada Perusahaan Elang Mas Sindang Kasih Ciamis. Jurnal Industrial Galuh, 4(2), 75–85. https://doi.org/10.25157/jig.v4i2.3021
Aulia, N. A. (2016). Analisis Dan Evaluasi Sisa Material Konstruksi Menggunakan Metode Pareto Dan Fishbone Diagram (Studi Kasus Pada Proyek Pembangunan Gedung Pascasarjana Universitas Islam Malang). Occupational Medicine, 53(4), 130.
Bangun, I. H., Rahman, A., & Darmawan, Z. (2014). PERENCANAAN PEMELIHARAAN MESIN PRODUKSI DENGAN MENGGUNAKAN METODE RELIABILITY CENTERED MAINTENANCE ( RCM ) II PADA MESIN BLOWING OM ( Studi Kasus : PT Industri Sandang Nusantara Unit Patal Lawang ) PRODUCTION MACHINE MAINTENANCE PLANNING WITH RELIABILITY. 997–1008.
Dipa, M., Lestari, F. D., Faisal, M., & Fauzi, M. (2022). Analisis Overall Equipment Effectiveness (Oee) Dan Six Big Losses Pada Mesin Washing Vial Di Pt. Xyz. Jurnal Bayesian : Jurnal Ilmiah Statistika Dan Ekonometrika, 2(1), 61–74. https://doi.org/10.46306/bay.v2i1.29
Eddy, E., & Chairunissa, C. (2021). Peningkatan Overall Equipment Effectiveness (OEE) Pada Mesin Molding Melalui Perbaikan Six Big Losses Di PT. CWI. Jurnal Optimalisasi, 7(1), 100. https://doi.org/10.35308/jopt.v7i1.2537
Hamdy, M. I., & Azizi, A. (2017). Analisis Nilai Overall Equipment Effectiveness ( OEE ) pada Mesin Ripple. Jurnal Hasil Penelitian Dan Karya Ilmiah Dalam Bidang Teknik Industri, 3(1), 53–58.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Silva Fauziah, Priyo Ari Wibowo, Rikzan Bachrul Ulum
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
