Analisis Ergonomi Pada Bahaya Postur Pekerja PLN ULPLTD Labuhan-Sumbawa Berdasarkan SNI 9011:2021
DOI:
https://doi.org/10.31004/jutin.v8i3.47667Keywords:
Ergonomic, Work Posture, SNI 9011:2021Abstract
PT. PLN UPLTD Labuhan-Sumbawa as one of the electricity provider units certainly has the potential for danger to workers, one of which is in the Maintenance section. Based on the results of the GOTRAK survey, it was found that all workers had experienced pain or discomfort with a moderate risk level of 44%. The risk level of body pain is in the upper back, lower back, and right shoulder areas, so an ergonomic analysis is needed on the activities of maintenance workers based on SNI 9011:2021. The results of the analysis show that the partition installation worker is in the moderate hazard category with a total score of 6; the pipe installation worker is in the moderate hazard category with a total score of 4; and the Central B cleaning worker is in the hazard category with a total score of 2. Recommendations for improvement are needed by providing proposals for improving work stations including redesigning work stations, adjusting layouts, using personal protective equipment, and improving lighting in the workplace.References
Agustriyanti, R., Lalu, H. and Lubis, M.Y., 2020. Perancangan Stasiun Kerja Operator Pembuat Ulir Untuk Mengurangi Risiko Terjadinya Musculoskeletal Disorder Dengan Pendekatan Antropometri Di Pt. Sunrise Abadi. eProceedings of Engineering, 7(2).
Almira, D., Handoko, L. and Amrullah, H.N., 2022. Penilaian Postur Kerja Menggunakan Quick Exposure Checklist Pada Pekerja Sortir. Jurnal Produktiva, 2(2). https://doi.org/10.36815/jurva.v2i3.2083
Ardiansyah, D. R., & Widanarko, B. (2021). Analisis prevalensi dan faktor pekerjaan terhadap terjadinya gangguan otot tulang rangka akibat kerja pada pekerja perancah di PT X. PREPOTIF : Jurnal Kesehatan Masyarakat, 5(2), 635–640. https://doi.org/10.31004/prepotif.v5i2.1911
Ayuni, R. F. ., & Inayah, Z. . (2023). Hubungan Posisi Kerja dengan Keluhan Low Back Pain pada Pekerja Sarang Burung Walet Kembangbahu . Afiasi : Jurnal Kesehatan Masyarakat, 8(1), 395–403. https://doi.org/10.31943/afiasi.v8i1.267
Badan Pusat Statistik (BPS) Kabupaten Sumbawa. (2024, 16 Juli). Laju Pertumbuhan PDRB Kabupaten Sumbawa (Persen), 2023. Diakses pada 2 November 2024, dari [https://sumbawakab.bps.go.id/id/statistic-table/2/ODcjMg==/laju-pertumbuhan-pdrb-kabupaten-sumbawa.html].
Badan Standardisasi Nasional (BSN). (2021). SNI 9011:2021 tentang Pengukuran dan Evaluasi Potensi Bahaya Ergonomi di Tempat Kerja. Jakarta (ID) : BSN.
Chan, Y., Huang, T., San, Y., Chan, W., Chang, C., & Tsai, Y. (2020). The Risk Classification of Ergonomic Musculoskeletal Disorders in Work-related Repetitive Manual Handling Operation with Deep Learning Approaches. International Conference on Pervasive Artificial Intelligence (ICPAI) , 2020 Dec; 268-271. 10.1109/ICPAI51961.2020.00057
Damayanti, O. K., & Wati, P. E. D. K. (2024). Inovasi Alat Pemotong Kayu Bobbin Guna Meningkatkan Efisiensi Waktu Produksi Bagian Closing pada PT. Wonosari Jaya. Jurnal SENOPATI: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 5(2), 86-99. https://doi.org/10.31284/j.senopati.2024.v5i2.5316
Febrianti, A. and Adiprabawa, R., 2022. Redesign Stasiun Kerja Pemotongan Kertas Menggunakan Posture Evaluation Index di PT Remaja Rosdakarya. Go-Integratif: Jurnal Teknik Sistem dan Industri, 3(01), pp.1-12. https://doi.org/10.35261/gijtsi.v3i01.5847
Hadiyansyah, F., Juhara, S. and Rahayu, M., 2021. Redesain Kursi Kuliah Ergonomis Menggunakan Pendekatan Antropometri Pada Program Studi Teknik Industri Universitas Islam Syekh Yusuf Tangerang. Unistek: Jurnal Pendidikan dan Aplikasi Industri, 8(2), pp.102-106. https://doi.org/10.33592/unistek.v8i2.1512
Hijami, N. ’Afifah ., & Kurniawidjaja, L. M. (2023). FAKTOR RISIKO GANGGUAN OTOT DAN TULANG RANGKA AKIBAT KERJA PADA PEKERJA PERKANTORAN: A SYSTEMATIC REVIEW. PREPOTIF : JURNAL KESEHATAN MASYARAKAT, 6(1), 251–267. https://doi.org/10.31004/prepotif.v6i1.2972
HSE Government, 2019. Statistics Work related iil health and occupational disease Labour force survey. Available from: https:/www.hse.govuk/statistics/caudis/
Larasati, N., Handoko, L. and Rachmat, A.N., 2022. Penilaian Resiko Postur Kerja Menggunakan Metode REBA Terhadap Keluhan Muskuloskeletal Pada Pekerjaan Pengelasan. Jurnal Produktiva, 2(1), pp.16-20. https://doi.org/10.36815/jurva.v2i1.1947
Prastuti, B., Sintia, I., & Ningsih, K. W. (2020). Hubungan lama kerja dan posisi duduk terhadap kejadian low back pain pada penjahit di Kota Pekanbaru. Jurnal Endurance: Kajian Ilmiah Problema Kesehatan, 5(2), 375-382. : http://doi.org/10.22216/jen.v5i2.4431
Sutono, S.B., 2022. Perancangan Stasiun Kerja Proses Canting Berdasarkan Pendekatan Ergonomi. Jurnal Teknik Industri: Jurnal Hasil Penelitian dan Karya Ilmiah dalam Bidang Teknik Industri, 8(1), pp.17-27. https://doi.org/10.24014/jti.v8i1.16833
Syifa, N. (2023). EVALUASI BAHAYA ERGONOMI BERDASARKAN SNI 9011:2021 (Studi Kasus: UMKM HOKKIE BERKAH CILEGON) (Doctoral dissertation, Fakultas Teknik Universitas Sultan Ageng Tirtayasa).
Yudhistira, G. A., Utami, R. S. D. D., Basumerda, C., & Qurtubi, Q. (2023). Perbaikan Stasiun Kerja IKM Mebel dengan Metode REBA, QEC dan Pengukuran Antropometri. Jurnal INTECH Teknik Industri Universitas Serang Raya, 9(2), 141-146. https://doi.org/10.30656/intech.v9i2.6306
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Nurul Hudaningsih, Desi Rohmandani Putri, Rezkia Putri Dekantari
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
