Minimasi Waste Produk Side Chair di UD. Mustika Agung dengan Menggunakan Metode Waste Relationship Matrix
DOI:
https://doi.org/10.31004/jutin.v8i3.47320Keywords:
Waste, Side chair, Waste relationship matrixAbstract
UD. Mustika Agung is a company that focuses on the production of side chairs in East Java. Defects were found in the production process, namely several cracked joints due to wood that was not fully dried, and inventory, namely there were side chairs stacked on side chairs caused by the queuing process for finishing. UD. Mustika Agung seeks to reduce waste in the production of side chairs by implementing the concept of lean manufacturing to minimize existing waste. One of the tools to minimize the concept of lean manufacturing is the Waste Relationship Matrix (WRM) which functions to identify waste that occurs in the company. The two largest wastes were found, namely defects with a score of 32 and inventory with a score of 26. The proposed improvements are to replace the oven machine with a more modern one and add employeesReferences
Rahman, A. (2021, November). Penerapan lean manufacturing untuk meminimalkan waste dengan menggunakan metode VSM dan WAM pada PT XYZ. In Prosiding Seminar Nasional Penelitian LPPM UMJ (Vol. 2021).
Komariah, I. (2022). Penerapan lean manufacturing untuk mengidentifikasi pemborosan (waste) pada produksi wajan menggunakan value stream mapping (vsm) pada perusahaan primajaya alumunium industri di ciamis. Jurnal Media Teknologi, 8(2), 109-118.
friandi, F., & Saifuddin, J. A. (2023). Penerapan Lean Manufacturing Menggunakan Metode Waste Assessment Model (WAM) Untuk Mengurangi Waste Pada Lini Produksi Steel Structure. Jurnal Teknik Mesin, Industri, Elektro dan Informatika, 2(4), 62-75.
Salsabila, I. R., & Rochmoeljati, R. (2021). Analisis Penerapan Konsep Lean Manufacturing Pada Proses Produksi Stainless Steel Coil Untuk Mereduksi Pemborosan (Waste) di PT. XYZ. JUMINTEN, 2(2), 120-131.
Aisyah, S. (2020). Perencanaan Lean Manufacturing Untuk Mengurangi Pemborosan Menggunakan Metode VSM Pada PT Y Indonesia. Jurnal Optimasi Teknik Industri (JOTI), 2(2), 56-59
Jannah, M., & Siswanti, D. (2017). Analisis penerapan lean manufacturing untuk mereduksi over production waste menggunakan value streammapping dan fishbone diagram. Sinteks: Jurnal Teknik, 6(1).
Irawan, A., & Putra, B. I. (2021). Identifikasi Waste Kritis Pada Proses Produksi Pallet Plastik Menggunakan Metode WAM (Waste Assessment Model) Di PT. XYZ. Jurnal SENOPATI: Sustainability, Ergonomics, Optimization, and Application of Industrial Engineering, 3(1), 20-29.
Sinuraya,.F (2021). Usulan Minimasi Waste Menggunakan Metode Dmaic Di Yanto Pottery (Doctoral dissertation, universitas atma jaya yogyakarta)
Annah, M., & Siswanti, D. (2017). Analisis penerapan lean manufacturing untuk mereduksi over production waste menggunakan value stream mapping dan fishbone diagram. Sinteks: Jurnal Teknik, 6(1).
Rawabdeh, I. A. (2005). A model for the assessment of waste in job shop environments.International Journal of Operations & Production Management, 25(8), 800-822.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Bima Triaji Wardana, Aloysius Tommy Hendarawan, Halwa Annisa Khoiri
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
