Perancangan Alat Bantu Pengambilan Kain pada Proses Pengukuran dan Pemotongan di Konveksi Printrend dengan Metode Rasional
DOI:
https://doi.org/10.31004/jutin.v8i3.43830Keywords:
RULA, Design, Rational Method, Anthopometric, CatiaAbstract
Cutting and Measur ing Process at CV. Printrend Convection has several work activities. However, the work activity when taking the fabric below, which is done repeatedly by bending, is not ergonomic. Based on the results of the RULA method, this attitude is high risk, and the final score obtained is 7, so it is high risk, and changes are made now. Therefore, a design was made to reduce the final RULA score using the rational method, the height of the design is based on the anthropometry of the worker's Standing Height with the 10th percentile. Then, the use of the design is simulated with Catia to determine the final RULA score. Based on the simulation results, pulling fabric from the fabric hanging tool and taking fabric from below with a new work attitude gets a final RULA 3 low-risk score. The activity of taking fabric from the highest fabric rack based on the simulation with Catia receives a final score of RULA 2 with a work attitude whose risk can be ignored. From the simulation results, the design succeeded in reducing the final RULA score and it’s risk levelReferences
Abisena, V. & Martini, S. (2020). Perancangan Material Handling Equipment pada Proses Pengemasan Buah Banggis menggunakan Metode Perancangan Produk Rasional (Studi Kasus PT. Andalas Fiddini Agrotama). e-Proceeding of Engineering. Vol. 7, No. 3, Hal. 9526-9534. ISSN 2355-9365
Anwardi, Pratiwi, N.G, Wibowo, R.P., Meiliati, H. & Muadzin, P (2024). Perancangan dan Pengembangan Treker Shock Breaker dengan Pendekatan Metode Rasional. JTMIT: Jurnal Teknologi dan Manajemen Industri Terapan, Vol. 3, No. 3, Hal. 281-294 P-ISSN: 2829-0232 E-ISSN: 2829-0038
Budiawati Ayu, Muchtiar Yesmizarti, Setiawati Lestari & Putri Tri Nilda. Perbaikan Sistem Kerja Operator Pemilihan Batu Berdasarkan Analisa Postur Kerja. JISI: Jurnal Integrasi Sistem Industri. Vol. 11, No. 1. Hal 99-108. P-ISSN: 2355-2085, E-ISSN: 2550-083X
Cahyanin, A.W., Kusayat, A. & Rahayu, M. (2020). Perancangan Body Catalytic Converter untuk Mesin Diesel Menggunakan Metode Perancangan Produk Rasional agar dapat Dilakukan Proses Penggantian Filter (Studi Kasus CV. XYZ). e- Proceeding of Engineering. Vol. 7, No. 2, Hal. 5737-5744. ISSN 2355-9365
Deni, R.R.D.R., Martini, S & Iqbal, M (2021). Perancangan Alat Pengiris Tempe pada UMKM CC dengan Metode Perancangan Produk Rasional. e-Proceeding of Engineering. Vol. 7, No. 3, Hal. 559-566. ISSN 2355-9365
El Ahmady Fachri, R., Martini, Sri., Kusnayat Agus (2020). Penerapan Metode Ergonomic Function Deployment Dalam Perancangan Alat Bantu Untuk Menurunkan Balok Kayu. JISI: Jurnal Integrasi Sistem Industri. Vol. 7, No. 1, Hal. 21-
30. P-ISSN: 2355-2085, E-ISSN: 2550-083X
Faradika, G., Mariaty. L., & Mutiara P. (2023) Analisis Beban Kerja dengan Metode RULA pada Divisi Pemindahan Barang di PT. Nisantara Card Semesta Cabang Medan. Jurnal Teknologi Informasi dan Industri. Vol.3, No.1, Hal. 01-17. ISSN 2722-1784
Heni Putri Inda, Kusnayat Agus, & Rahayu Mira (2016), Perbaikan Rancangan Material Handling Equipment Yang Ergonomis Menggunakan Pendekatan Ergonomic Function Deployment Pada PT XYZ. Jurnal Rekyasa Sistem & Industri. Vol. 3 No. 4, Hal. 16-20.
Imaduddin Muhammad Hanif, Rahayu Mira, & Mufidah Ilma Mufidah (2021) Perancangan Conveyo Mesin Crusher Menggunakan Metode Perancangan Produk Rasional Di PT. XYZ. e-Proceeding of Engineering : Vol.8, No.5, Hal. 7366-7370, ISSN 2355-9365
Kurnianingtyas, C.D. & Heryawan, T. (2018). Rancangan Alat Potong Kulit Bahan Baku Tas dengan Metode Rasional. JITI: Jurnal Ilmiah Teknik Industri. Vol. 17, No. 2, Hal. 99-107. ISSN (Online) 2460-4038 ISSN (Print) 1412-1412
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Aqshal Madani, Fahmi Ramadhani, Linda Setyowati, Mutmainah Mutmainah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
