Evaluasi Cement Mill : Neraca Massa dan Neraca Energi pada Cement Mill Indarung V PT Semen Padang
DOI:
https://doi.org/10.31004/jutin.v8i4.42607Keywords:
Cement Mill, Mass Balance and Energy Balance, Cement QualityAbstract
PT Semen Padang, as the largest Cement producer in Indonesia, employs a multi-stage Cement production process, comprising a Raw Mill, a Kiln, and a Cement Mill. The Cement Mill process, serving as the final grinding stage, plays a crucial role in Cement production. Here, clinker, gypsum, pozzolan, and limestone are mixed and ground into Cement, facilitated by grinding media and impact or tumbling forces. This study aimed to investigate the hot gas requirements and efficiency of the a Cement Mill unit, with a focus on the mass balance and energy balance of the Indarung V Cement Mill at PT Semen Padang. The results indicated that the mass of air utilized in the a Cement Mill unit was 132.96 tons/hour, while the water requirement was 3.68 tons/hour. The total mass balance value was 336.95 tons/hour, and the total energy balance value was 4,213,679 Kcal/hour.References
Amelia, M. P., Safaruddin, S., & Muzzaki, M. M. (2022). Analisis Prosedur Pembuatan Semen Pada Pt. Semen Baturaja. Jurnal Multidisipliner Bharasumba, 1(04), 512–522. https://doi.org/10.62668/bharasumba.v1i04.301
Andini, F., Amri, H., & Suryani, L. (2019). Review Industri Semen. In Jurnal Kimia (Vol. 4, pp. 1–25).
Batubara, S.-, & Pangaribuan, W. (2023). Pengujian Kuat Tekan Beton Karakteristik Menggunakan Semen Opc Type I, Ppc Dan Pcc. Jurnal Insinyur Profesional, 3(1), 122–126. https://doi.org/10.24114/jip.v3i1.42996
Kimia, D. A. N. S. (2023). Jurnal Rekayasa , Teknologi Proses. 9211(December 2022), 2–12.
Rahim, H., Basir, M. M., & Diana, S. (2023). Analisis Kadar Cao Bebas Dan Lime Saturation Factor (Lsf) Pada Klinker Di Pt. Semen Bosowa Maros. Jurnal Teknologi Kimia Mineral, 2(1), 7–10. https://doi.org/10.61844/jtkm.v2i1.389
Sulaeman, N. A. (2023). Analisis Perawatan Komponen Fan pada Cement Mill Pabrik Indarung V PT Semen Padang dengan Pendekatan Metode Reliability Centered Maintenance Analysis of Fan Component Maintenance in the Cement Mill of PT Semen Padang Indarung V Factory using the Reliabili. 13(2), 2–7.
Ummah, M. S. (2019). pengaruh variasi penambahan abu serbuk gergaji kayu pada pasta semen terhadap uji bahan semen. Sustainability (Switzerland), 11(1), 1–14. http://scioteca.caf.com/bitstream/handle/123456789/1091/RED2017-Eng-8ene.pdf?sequence=12&isAllowed=y%0Ahttp://dx.doi.org/10.1016/j.regsciurbeco.2008.06.005%0Ahttps://www.researchgate.net/publication/305320484_SISTEM_PEMBETUNGAN_TERPUSAT_STRATEGI_MELESTARI
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Dwi Annisa , Durain Parmanaon, Alfein Rahmad, Dodi Indrianto
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
