Pengaruh jenis perekat terhadap kualitas biobriket hasil pirolisis limbah biomassa lignoselusa D07

Authors

  • Restin Restin Universitas Muslim Indonesia, Makassar
  • La Ifa Universitas Muslim Indonesia
  • Syamsuddin Yani Universitas Muslim Indonesia

DOI:

https://doi.org/10.31004/jutin.v8i1.41569

Keywords:

Biomass, Lignocellulose D07, Adhesive, Pyrolysis

Abstract

Currently the world is facing energy crisis. This is due to the increasingly depleting energy sources from non-renewable fossil raw materials such as petroleum, natural gas and coal which are not balanced by increasing population growth. The solution to the energy crisis from fossil raw materials is using alternative energy sources, one of them is biomass. Lignocellulose D07 is a product biomass from the seaweed processing industries, that comes from plant lignocellulose. Biomass quality can be improved by using the pyrolysis method. Pyrolysis is a thermal degradation method without the oxygen. Pyrolysis produces two main products, that is char (charcoal) and liquid smoke. Pyrolysis temperature can affect the quality of the resulting product. Charcoal from the pyrolysis process can be used for making biobriquettes. Biobriquettes one of renewable energy that can be produced from various raw materials, are cleaner and environmentally friendly. When we make biobriquettes, we need add adhesive to unite the charcoal granules so that they can be shaped as needed. The type of adhesive can affect the quality of the product produced. Based this background, this research has two objectives, namely to determine the effect of pyrolysis temperature on the quality of charcoal and to determine the effect of adhesive type on the quality of briquettes. There are three pyrolysis temperatures used, namely 300,350,400⁰C, while the adhesive used includes starch, sago and cornstarch. The analysis carried out includes water content, ash content, volatile matter, heating value and sulfur. Based on the research results, it was found that a pyrolysis temperature of 400 ⁰C was the best variable with a water content of 2.8%, ash content of 5.2%, volatile content of 30.47 and a heating value of 6832 cal/gram. Meanwhile, the briquette adhesive that showed the best quality was obtained from sago with the highest calorific value of 6874 cal/gram, water content of 4.9%, ash content of 5.06% and volatile matter of 40.66%. 

References

Anizar, H., Sribudiani, E., & Somadona, S. (2020). Pengaruh Bahan Perekat Tapioka Dan Sagu Terhadap Kualitas Briket Arang Kulit Buah Nipah. Perennial, 16(1), 11–17.

Arman, M., & Munira. (2018). Pirolisis bahan batubara dan serbuk gergaji. Journal Of Chemical Process Engineering, 03(02), 27–32.

Aziz, M. R., Siregar, A. L., Rantawi, A. B., & Rahardja, I. B. (2019). Pengaruh Jenis Perekat pada Briket Cangkang Kelapa Sawit Terhadap Waktu Bakar. Prosiding SEMNASTEK Fakultas Teknik Universitas Muhammadiyah Jakarta, 141–152.

Cholilie, I. A., & Zuari, L. (2021). Pengaruh Variasi Jenis Perekat terhadap Kualitas Biobriket Berbahan Serabut dan Tandan Buah Lontar (Borassus flabellifer L.). Agro Bali: Agricultural Journal, 4(3), 391–402.

Faizal, M., Saputra, M., & Zainal, F. A. (2015). Pembuatan Briket Bioarang dari Campuran Batubara dan Biomassa Sekam Padi dan Eceng Gondok. Teknik Kimia, 21(4), 1–12.

Febriyanti, F., Fadila, N., Sanjaya, A. S., Bindar, Y., & Irawan, A. (2019). Pemanfaatan Limbah Tandan Kosong Kelapa Sawit Menjadi Bio-Char, Bio-Oil Dan Gas Dengan Metode Pirolisis. Jurnal Chemurgy, 3(2), 12.

Halim, A., & Rante, M. (2024). Pengaruh Dua Jenis Perekat Terhadap Briket Arang Tempurung Kelapa. Journal Of Social Science Research, 4(1), 11408–11418.

Hasibuan, R., & Pardede, H. M. (2023). Pengaruh Suhu dan Waktu Pirolisis terhadap Karakteristik Arang dari Tempurung Kelapa. Jurnal Teknik Kimia USU, 12(1), 46–53.

Ifa, L. (2019). Production of bio-briquette from biochar derived from pyrolysis of cashew nut waste. Ecology, EnvironmentandConservation (EEC), 25, 125-131.

Ifa, L., Yani, S., Nurjannah, N., Darnengsih, D., Rusnaenah, A., Mel, M., ... & Kusuma, H. S. (2020). Techno-economic analysis of bio-briquette from cashew nut shell waste. Heliyon, 6(9).

Indrawati, C., Harsojuwono, B. A., & Hartiati, A. (2019). Karakteristik Komposit Bioplastik Glukomanan Dan Maizena Dalam Pengaruh Variasi Suhu Dan Waktu Gelatinisasi. Jurnal Rekayasa Dan Manajemen Agroindustri, 7(3), 468.

Jannah, B. L., Pangga, D., & Ahzan, S. (2022). Pengaruh Jenis dan Persentase Bahan Perekat Biobriket Berbahan Dasar Kulit Durian terhadap Nilai Kalor dan Laju Pembakaran. Lensa: Jurnal Kependidikan Fisika, 10(1), 16.

Kalsum, U., & Ibrahim, A. (2023). Pengaruh Ukuran Partikel Dan Komposisi Terhadap Kualitas Briket Dari Campuran Batubara Dan Cangkang Sawit. 14(02), 136–146.

Khusaini, R., & Rahman, J. (2024). Pengaruh kerapatan briket campuran tempurung kelapa dan bonggol jagung terhadap kinerja kompor biomassa. Jurnal Teknik Mesin Indonesia, 19(1), 107–111.

Mahadi, I., & Ulitua Panggabean, Y. (2023). Pengaruh Konsentrasi Campuran Perekat Kanji Dan Sagu Terhadap Mutu Briket Limbah Kulit Kolang Kaling (Arenga Pinnata Merr.). Jurnal Pendidikan Biologi, 10(1), 36–45.

Muhamad Iqbal Akbar Asfar, A., Muhammad Irfan Taufan Asfar, A., Dewi Damayanti, J., Iqbal Mukhsen, M., Budianto, E., Negeri Ujung Pandang, P., & Keperawatan Mappa Oudang, A. (2023). Bio-Arang Briket Dari Limbah Sekam Padi Melaui Olah Latih Kelompok Tani Eccengnge’. Prosiding Konferensi Pengabdian Masyarakat, 1, 21–28.

Ningsih, A., & Hajar, I. (2019). Analisis Kualitas Briket Arang Tempurung Kelapa Dengan Bahan Perekat Tepung Kanji Dan Tepung Sagu Sebagai Bahan Bakar Alternatif. Jurnal Teknologi Terpadu, 7(2), 101–110.

Ningsih, L. A., Setiawan, I., Syari, T., Nurdjannah, N., Ifa, L., Afiah, I. N., & Heri Septya Kusuma. (2023). Pine-to-Bioenergy: Potential of pine sap as adhesive and pine flower biomass waste in the production of biobriquettes. Fuel, 350.

Novita, S. A., Santosa, S., Nofialdi, N., Andasuryani, A., & Fudholi, A. (2021). Artikel Review: Parameter Operasional Pirolisis Biomassa. Agroteknika, 4(1), 53–67.

Pratiwi Nova Sari, & Aminah, S. (2020). Pemanfaatan Serbuk Gergaji Sebagai Bahan Baku Briket. 21(1), 1–9.

Rahmawati, S., Wahyuni, S., Khaeruni, A., Ilmu dan Teknologi Pangan, J., Pertanian, F., Halu Oleo, U., & Jurusan Hama dan Penyakit Tanaman, K. (2019). Pengaruh Modifikasi terhadap Karakteristik Kimia Tepung Sagu Termodifikasi : Studi Kepustakaan The Effect of Modification Process on the Chemical Characteristics of Modified Sago Flour: A Review. J. Sains Dan Teknologi Pangan, 4(2), 2096–2103.

Ramadan, Y., Augustyn, G. H., & Mailoa, M. (2023). Formulasi Tepung Sagu Dan Tepung Kacang Merah Terhadap Pembuatan Kukis. Jurnal Agrosilvopasture-Tech, 2(2), 260–268.

Sa’diyah, K., Suharti, P. H., Hendrawati, N., Pratamasari, F. A., & Rahayu, O. M. (2021). Pemanfaatan Serbuk Gergaji Kayu sebagai Karbon Aktif melalui Proses Pirolisis dan Aktivasi Kimia. CHEESA: Chemical Engineering Research Articles, 4(2), 91.

Sugiharto, A., & Firdaus, Z. ‘Ilma. (2021). Pembuatan Briket Ampas Tebu Dan Sekam Padi Menggunakan Metode Pirolisis Sebagai Energi Alternatif. Jurnal Inovasi Teknik Kimia, 6(1), 17–22.

Surono, U. B., & Hutomo, S. G. (2022). Perbandingan Proksimat Analisis dan Homogenitas Nilai Kalor Biomassa Sebelum dan Sesudah Proses Torefaksi. ResearchGate, March, 978–623.

Syarif, T., Aladin, A., Modding, B., Rahmatullah, R. A., & Mustafa, N. M. (2023). Penentuan Waktu Optimum Pirolisis Limbah Biomassa Serbuk Gergaji Batang Kelapa Menggunakan Gas Inert Argon. Journal of Chemical Process Engineering, 8(1), 40–48.

Syarif, T., Ifa, L., Nurdjannah, & Ningsih, L. A. (2023). Ganti Bahan Bakar Fosil dengan Briket Bunga Pinus (Issue 112).

Tambaria, T. N., & Serli, B. F. Y. (2019). Kajian Analisis Proksimat pada Briket Batubara dan Briket Biomassa. Jurnal Geosains Dan Teknologi, 2(2), 77.

Yuniarti, Y., Megawati, E., Dewi, A., Ariyani, D., Vegatama, M. R., & Sahara, A. (2023). Pengaruh Suhu Terhadap Karakteristik Arang Hasil Pirolisis Kulit Kolang-Kaling (Arenga pinnata). DISTILAT: Jurnal Teknologi Separasi, 8(4), 1020–1030.

Downloads

Published

2025-01-17

How to Cite

Restin, R., Ifa, L., & Yani, S. (2025). Pengaruh jenis perekat terhadap kualitas biobriket hasil pirolisis limbah biomassa lignoselusa D07. Jurnal Teknik Industri Terintegrasi (JUTIN), 8(1), 1119–1131. https://doi.org/10.31004/jutin.v8i1.41569

Issue

Section

Articles of Research