Analisis pengendalian kualitas pada mesin potong jahit dalam proses produksi Woven Bag menggunakan metode SQC dan FMEA di PT. XYZ
DOI:
https://doi.org/10.31004/jutin.v8i1.38595Keywords:
SQC, FMEA, Product QualityAbstract
XYZ is a company manufacturing plastic sacks, especially woven bags. During the production process, problems were discovered with the Sewing Cutting Machine (MPJ), which affected the quality of the final product. This research is aimed at identifying and analyzing problems and factors that cause damage to the machine. Therefore, the methods used are Statistical Quality Control (SQC) and Failure Mode and Effect Analysis (FMEA). Based on the results of research at (SQC), it was found that the most dominant defects were 34% loose stitching, 33.5% holes in sacks, 32.5% inappropriate sewing folds. Furthermore, based on the results of the FMEA analysis, it is known that the cause of the defect with the highest RPN value is a loose stitch of 240 with the cause being inconsistent thread tension. Recommendations for improvements that can be proposed are implementing an automatic control system to maintain the stability of thread tension and conducting operator training to ensure appropriate thread settings. The implementation of these improvements is expected to improve the overall quality of woven bag products.References
Abdul Ali Bimansyah, & Istantyo Yuwono. (2023). Analisis Pengendalian Kualitas Pada Proses Produksi Komponen Kursi Susun Menggunakan Metode SPC(Statistical Process Control). Jurnal Sipil Terapan, 1(1), 94–108. https://doi.org/10.58169/jusit.v1i1.152
Alfie Oktavia. (2021). Analisis Pengendalian Kualitas Produk Menggunakan Pendekatan Statistical Quality Control (SQC) di PT. Samcon. Industri Inovatif?: Jurnal Teknik Industri, 11(2), 106–113. https://doi.org/10.36040/industri.v11i2.3666
Apriliana, A., & Sukaris, S. (2022). Analisa Kualitas Layanan Pada Cv. Singoyudho Nusantara. Jurnal Maneksi, 11(2), 498–504. https://doi.org/10.31959/jm.v11i2.1246
Apriyanti, Y., Lorita, E., & Yusuarsono, Y. (2019). Kualitas Pelayanan Kesehatan Di Pusat Kesehatan Masyarakat Kembang Seri Kecamatan Talang Empat Kabupaten Bengkulu Tengah. Profesional: Jurnal Komunikasi Dan Administrasi Publik, 6(1). https://doi.org/10.37676/professional.v6i1.839
Ardyansyah, M. I., & Purnomo, A. (2024). Analisa Perbandingan Metode Failure Mode and Effects Analysis (FMEA) dengan Quality Control Circle (QCC). Jurnal Pendidikan Tambusai, 8(1), 1876–1882.
Cahaya Mulia, N. A., & Rochmoeljati, R. (2021). Pengendalian Kualitas Pengelasan Menggunakan Metode Statistical Quality Control (SQC) dan Failure Mode Effect Analysis (FMEA) di PT. PAL Indonesia. Juminten, 2(6), 60–71. https://doi.org/10.33005/juminten.v2i6.346
Cipta Dinata, M. H., Andesta, D., & Hidayat, H. (2022). Analisis Pengendalian Kualitas Produk Tangga Besi Pt. Ajg Untuk Mengurangi Kecacatan Produk Menggunakan Metode Statistik Quality Control (Sqc). Journal of Industrial Engineering and Operation Management, 5(1), 27–36. https://doi.org/10.31602/jieom.v5i1.7181
Labib, D., & Ayudyah Eka Apsari. (2024). Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Menggunakan Metode Failure Metode and Effect Analysis (Fmea) Dan Fault Tree Analysis (Fta). Jurnal Ilmiah Teknik Industri Dan Inovasi, 2(1), 45–64. https://doi.org/10.59024/jisi.v2i1.599
Mashabai, I., Ruspendi, R., & Syauqi, M. I. (2022). Analisa Permasalahan Sticking Pada Tablet XYZ Menggunakan Metode PDCA di PT. Sunthi Sepuri. Unistek, 9(1), 19–27. https://doi.org/10.33592/unistek.v9i1.2067
Meisita, C., & Sheets, C. (2024). ANALISIS PENGENDALIAN KUALITAS UNTUK MEMINIMUMKAN. 13(5), 709–718.
Nababan, P., & Abdurahman, N. C. (2022). Analisis Pengendalian Kualitas Pelindung Pipa (Protector) Dengan Metode Statistical Proses Control (Spc) Di Pt.Xyz. Jurnal Teknik Ibnu Sina (JT-IBSI), 7(02), 1–10. https://doi.org/10.36352/jt-ibsi.v7i02.543
Nazia, S., Fuad, M., & Safrizal, S. (2023). Analisis Statistical Quality Control (SQC) Dalam Pengendalian Kualitas Produk Pada Usaha Batu Bata Di Kota Langsa. Jurnal Minfo Polgan, 12(1), 1404–1416. https://doi.org/10.33395/jmp.v12i1.12790
Siregar, Y. S., Darwis, M., Baroroh, R., & Andriyani, W. (2022). Peningkatan Minat Belajar Peserta Didik dengan Menggunakan Media Pembelajaran yang Menarik pada Masa Pandemi Covid 19 di SD Swasta HKBP 1 Padang Sidempuan. Jurnal Ilmiah Kampus Mengajar, 2, 69–75. https://doi.org/10.56972/jikm.v2i1.33
Yoston Harada Sinurat, M. A. S. (2022). Mempelajari Proses Produksi Checking Fixture (CF) Panel Unit Dengan Studi Kasus di PT. Fadira Teknik. Jurnal Ilmiah Wahana Pendidikan, 8(3), 178–183. https://doi.org/10.5281/zenodo.6020361
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Risma Dwi Sukma Wardani, Nur Rahmawati
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
