Analisa dan Usulan Perbaikan Layanan Sertifikasi Produk dengan Metode Lean Service

Loista Sevnin Kacaribu; Uni Pratama  Tarigan; Anita  Sembiring; Irwan  Budiman

doi:10.31004/jutin.v7i3.30454

Authors

Loista Sevnin Kacaribu Universitas Prima Indonesia
Uni Pratama Tarigan Universitas Prima Indonesia
Anita Sembiring Universitas Prima Indonesia
Irwan Budiman Universitas Sumatera Utara

DOI:

https://doi.org/10.31004/jutin.v7i3.30454

Keywords:

SPPT SNI, BSPJI, Lean Service, Waste, FVSM

Abstract

Product Certification Service is a service to business actors who want to get their products certified through the Indonesian National Standard Mark User Product Certificate (SPPT SNI), either compulsorily or voluntarily regulated products. Therefore, the Standardization and Industrial Services Center (BSPJI) Medan as a public service unit that has a Product Certification Agency (LSPro) is needed. The problem is the length of the LSPro BSPJI Medan service process to complete the company's SPPT SNI starting from the application until the issuance of the SPPT SNI. This causes losses for business actors both in funds and time. The purpose of this study is to provide suggestions for improvement and optimize time by maintaining value-added activities and reducing non-value-added activities. The methods used are Lean Service, Waste Analysis and for design using the FVSM Method. The results showed that there was waste that occurred in the LSPro BSPJI Medan service. From the results of the FVSM carried out, there was a reduction in service time from 92 working hours to 26 working hours.

References

Devi, M., Sibuea, A., Ginting, Y., Tarigan, U., & Sembiring, A. (2023). Implementasi Lean Service dalam Meminimalisasi Waktu Tunggu dan Kegiatan Waste Pelayanan BPJS di Puskesmas Laguboti.

Faisal Ashari, E. W. (2023). Pendekatan Lean Service untuk Mengurangi Pemborosan Waktu Layanan Service Mobil dengan Metode Value Stream Mapping (VSM). Buana Ilmu, 7(2), 158-167.

Heri Tri Irawan, I. P. (2018). Analisis Lean Service untuk Mengurangi Waste pada Perusahaan Daerah Air Minum (PDAM) Tirta Mountala Aceh Besar. Jurnal Optimalisasi, 70-77.

Peraturan Menteri Perindustrian. (2022, 2). Peraturan Menteri Perindustrian Nomor 1 Tahun 2022 tentang Organisasi dan Tata Kerja Unit Pelaksana Teknis Di Lingkungan Badan Standardisasi dan Kebijakan Jasa Industri. Jakarta: Kementerian Perindustrian. Retrieved from https://peraturan.bpk.go.id/Details/216691/permenperin-no-1-tahun-2022

Retrieved from https://peraturan.bpk.go.id/Details/53676/pp-no-102-tahun-2000

PP. (2012, 10). Peraturan Pemerintah (PP) Nomor 96 Tahun 2012 tentang Pelaksanaan Undang Undang Nomor 25 Tahun 2009 Tentang Pelayanan Publik. Jakarta. Retrieved from https://peraturan.bpk.go.id/Details/5311/pp-no-96-tahun-2012

Sangga Langit, P., Rizqiah Insanita, d., & Ekonomi dan Bisnis, F. (n.d.). • 94-110 Kata Kunci: Lean Service, Value Stream Mapping.

Saputra, M. (2015). 2015 International Conference on Automation, Cognitive Science, Optics, Micro Electro-Mechanical System, and Information Technology (ICACOMIT). IEEE.

Tarigan, U. P., & Budiman, I. (2021). Implementasi Metode Lean Service dan 5S untuk Meningkatkan Efisiensi Waktu Pelayanan di Dinas Pencegah dan Pemadam Kebakaran Kota Medan. Jurnal Sistem Teknik Industri, 23(1), 59-68.

Undang-undang. (2014, 9). Undang-undang (UU) Nomor 20 Tahun 2014 tentang Standardisasi dan Penilaian Kesesuaian. Jakarta. Retrieved from https://peraturan.bpk.go.id/Details/38663

Retrieved from https://peraturan.bpk.go.id/Details/38748/uu-no-25-tahun-2009

Vincent Gaspersz, A. F. (2011). Lean Six Sigma for Manufacturing and Service Industries Waste Elimination and Continuous Cost Reduction. Vinchristo Publication.

Wresni Anggraini, W. I. (2020). Lean Services Untuk Perbaikan Pelayanan Administrasi Akademik di Universitas. Jurnal Teknik Industri, 21-26.