Perancangan Alat Bantu Penghitung Pentol untuk Mempermudah Proses Pengemasan Berdasarkan Antropometri Pekerja

Moch. Rizal Gita  Firstyawan; Hery  Murnawan

doi:10.31004/jutin.v7i2.27824

Authors

Moch. Rizal Gita Firstyawan Universitas 17 Agustus 1945 Surabaya
Hery Murnawan Program Studi Teknik Industri, Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.31004/jutin.v7i2.27824

Keywords:

Anthropometry, Defects, Packaging, Effectively, Meatball

Abstract

The "Raja Gresik" meatball factory was established in 2008 and was established in 2018. One of the problems at this factory was that when carrying out the process of packaging meatball in plastic packs, there were packs whose quantity did not match the specifications for the number of meatball of that type. With the existing problems, it is hoped that this research can help the "Raja Gresik" meatball factory to reduce defects in calculating meatball in packs and make workers less tired because the design of the meatball counting tool is in accordance with the anthropomometry of workers. The existence of this tool can reduce losses from an inappropriate number of meatballs in the pack, which will effectively prevent product defects from excess or shortage of meatball. Also, the presence of this tool makes the packaging process time faster from 30 seconds to 23.43 seconds after using this tool. And it can be used for worker anthropometry, namely hand reach length, knee height and standing elbow height.

References

Agus, R. (2022). Mixer Machine Design for Tempeh Yeast with Soybean Seeds at the Tempeh Home Industry (Doctoral dissertation, Universitas 17 Agustus 1945 Surabaya).

Alfatiyah, R., & Marthin, W. (2017). Redesign Kursi Dan Meja Perkuliahan Dengan Metode Quality Function Deployment (QFD) Secara Ergonomis Di Program Studi Teknik Industri Universitas Pamulang. Proc. Univ. Pamulang, 2(1).

Kumala, A., & Winardi, S. (2020). APLIKASI PENCATATAN PERBAIKAN KENDARAAN BERMOTOR BERBASIS ANDROID: Universitas Narotama. Journal Intra Tech, 4(2), 112-120.

Laili, D. T., & Bahri, S. (2022) PROTOYPE SISTEM PARKIR MOBIL MENGGUNAKAN SENSOR LOAD CELL DENGAN ARDUINO MEGA 2560 BERBASIS ANDROID. Coding Jurnal Komputer dan Aplikasi, 8(1).

Mallapiang, F., et al. (2019). Analisis Postur Kerja dan Re-desain Fasilitas Kerja pada Pengrajin Batu Bata di Kelurahan Kalase’rena Kec. Bontonompo Kab. Gowa. Al-Sihah: The Public Health Science Journal.

Walpole, J. (1998). SWiFT: A feedback control and dynamic reconfiguration toolkit. Technical Report CSE-98-009, Department of Computer Science and Engineering, Oregon Graduate Institute.

Wicaksono, A. W. (2013). Penerapan Metode QFD (Quality Function Deployment) Pada Rencana Pengembangan Sekolah di SMKN 2 Yogyakarta. Laporan Penelitian. UN Yogyakarta.

Widodo, L., Sukania, I. W., & Angraeni, R. (2017). Analisis Beban Kerja dan Keluhan Subjektif Pekerja Serta Usulan Perbaikan Pada Proses Pembuatan Batako. Jurnal Ilmiah Teknik Industri, 5(3).

Wignjosoebroto, S. (2000). Ergonomi Studi Gerak dan Waktu: Teknik Analisis untuk Peningkatan Produktivitas Kerja. Surabaya: Guna Widya, 117-169.