PENERAPAN ERGONOMI K3 DALAM PROSES PENGELASAN

Authors

  • Yesi Yusmita Teknik Industri
  • Hijratul Hasanah Teknik Industri

DOI:

https://doi.org/10.31004/jutin.v3i2.1348

Keywords:

Electric Welding, Light, Air Flow.

Abstract

The process of electric welding is a welding process using webbed electrodes as an added source of heat from current power. From the ergonomic aspect that needs to be improved is the light intensity and airflow in the workplace. The purpose of this study was to determine the decrease in workload, musculoskeletal complaints and increase work productivity in students. This research was conducted with a total sample of 5 people, the experimental research method used the same subject design (treatment by subjects design). This research activity aims to increase the knowledge and skills of welders in welding activities based on welding safety and health standards (WSH).

References

Jokosisworo, S. et al. (2007) ‘Keselamatan pengelasan’, Jurnal Ilmu Pengetahuan & Teknologi kelautan, 4, pp. 11–14.

Santoso, J. (2006) ‘Pengaruh Arus Pengelasan Terhadap Kekuatan Tarik Dan Ketangguhan Las Smaw Dengan Elektroda E7018’, Skripsi.

Saputra, H., Syarief, A. and Maulana, Y. (2014) ‘Analisis Pengaruh Media Pendingin Terhadap Kekuatan Tarik Baja St37 Pasca Pengelasan Menggunakan Las Listrik’, Jurnal Ilmiah Teknik Mesin Unlam.

Sinulingga, S. R. et al. (2012) ‘Jurnal Ilmu Kesehatan Masyarakat MANAJEMAN RISIKO KESELAMATAN KERJA KEGIATAN PENGELASAN ( WELDING ) PT . PP . LONDON SUMATRA INDONESIA Tbk TIRTA AGUNG PALM OIL MILL SAFETY RISK MANAGEMENT ACTIVITIES OF THE WELDING AT PT . PP LONDON SUMATRA INDONESIA Tbk T’, Jurnal Ilmu Kesehatan Masyarakat, 3(03), pp. 205–213.

Solichin, Endarto, Farid, E. and Ariwinanti, D. (2014) ‘Penerapan Personal Protective Equipment ( Alat Pelindung Diri ) Pada LABORATORIUM PENGELASAN’, Penerapan Personal Protective Equipment (Alat Pelindung Diri) Pada Laboratorium Pengelasan.

Downloads

Published

2021-01-04

How to Cite

Yusmita, Y., & Hasanah, H. (2021). PENERAPAN ERGONOMI K3 DALAM PROSES PENGELASAN. Jurnal Teknik Industri Terintegrasi (JUTIN), 3(2), 19–23. https://doi.org/10.31004/jutin.v3i2.1348

Issue

Section

Articles of Research