Analisis Perbandingan Estimasi Cadangan Hidrokarbon Berdasarkan Simulasi Reservoir CMG dan Decline Curve Analysis
DOI:
https://doi.org/10.31004/jutin.v9i1.53863Keywords:
Reservoir Simulation, CMG, Decline Curve Analysis, Reserve Estimstion, Hydrocarbon ProductionAbstract
Hydrocarbon reserve estimation is a fundamental aspect in oil and gas field development planning and project economic evaluation. This study compares two reserve estimation approaches: reservoir simulation using Computer Modelling Group (CMG) and Decline Curve Analysis (DCA) with Microsoft Excel. CMG simulation uses IMEX module to model conventional reservoir with Original Oil in Place (OOIP) of 1.9735 × 10⁷ STB. DCA method analyzes three production decline models with initial production rate parameter of 1,065 BOPD and decline rate of 50% per year. Results show different 36-month cumulative production predictions: Exponential decline yields 172 MBO, Hyperbolic decline 212 MBO, and Harmonic decline 241 MBO with difference reaching 40%. Hyperbolic decline method provides optimal balance for heterogeneous reservoir characteristics. Combination of both approaches provides strong cross-validation for more accurate reserve estimation in supporting field development decision making.References
Ahmed, T. (2018). Reservoir engineering handbook. Gulf professional publishing.
Ahmed, T., & McKinney, P. (2011). Advanced reservoir engineering. Elsevier.
Arps, J. J. (1945). Analysis of Decline Curves. Transactions of the AIME, 160(01), 228–247. https://doi.org/10.2118/945228-G
CMG. (2021). Introduction to CMG’s Modelling Workflows. Cmg, 1–54.
Dake, L. P. (1983). Fundamentals of Reservoir Engineering. Elsevier Science. https://books.google.co.id/books?id=mFqpqMA62w8C
Ertekin, T., Abou-Kassem, J., & King, G. R. (2001). Basic Applied Reservoir Simulation, Textbook Series. SPE, Richardson, Tex., 7, 218–271.
Fanchi, J. R. (2018). Principles of Applied Reservoir Simulation. Gulf Professional Publishing. https://books.google.co.id/books?id=UxNfDwAAQBAJ
Fetkovich, M. J., Vienot, M. E., Bradley, M. D., & Kiesow, U. G. (1987). Decline-Curve Analysis Using type Curves—Case Histories. SPE Formation Evaluation, 2(04), 637–656. https://doi.org/10.2118/13169-PA
Lee, W. J., & Wattenbarger, R. A. (1996). Gas Reservoir Engineering. Henry L. Doherty Memorial Fund of AIME, Society of Petroleum Engineers. https://books.google.co.id/books?id=JlpQAQAAIAAJ
Mattar, L., Anderson, D., & Stotts, G. (2006). Dynamic Material Balance-Oil-or Gas-in-Place Without Shut-Ins. Journal of Canadian Petroleum Technology, 45(11). https://doi.org/10.2118/06-11-TN
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2026 Wildan Setyawan, Alriski Alriski, Zahrah Nuraliyah
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
