Perbaikan Postur Kerja Karyawan di UMKM Hilwafa Menggunakan Metode REBA dengan Tools Nordic Body Map

Authors

  • Perpetua Glenn Sibarani Universitas Tanjungpura
  • Dedi Wijayanto Universitas Tanjungpura
  • Hafzoh Batubara Universitas Tanjungpura

DOI:

https://doi.org/10.31004/jutin.v8i4.51217

Keywords:

Ergonomics, Musculoskeletal Disorders, REBA, NBM, anthropometry

Abstract

UMKM Hilwafa is a business engaged in chip production. The frying process is carried out manually and poses a risk of musculoskeletal disorders (MSDs) due to non-ergonomic working postures. This study aims to analyze and improve workers’ postures using the Rapid Entire Body Assessment (REBA) method with the Nordic Body Map (NBM) tool, as well as to design an assistive device to reduce injury risk. Data were collected through direct observation, NBM questionnaires, and body dimension measurements. Initial analysis showed an NBM score of 77.75 (high risk) and a REBA score of 12 (immediate action required). Based on anthropometric data, an ergonomic work table was designed and implemented in the frying process. After improvement, the NBM score decreased to 57 and the REBA score to 5, indicating a significant reduction in risk. The findings demonstrate that the assistive device effectively reduces MSDs and enhances comfort and work efficiency. 

References

N. Juliana et al., Ergonomi Dan Faal Kerja Penerbit Cv.Eureka Media Aksara. 2021.

J. P. Kesehtan, P. Studi, and K. Kerja, “Hubungan Postur Kerja dan Gerakan Berulang dengan Musculoskeletal Disorders ( MSDs ) pada Pekerja Pembuat Sol Sepatu di Mergelo Mojokerto,” no. 3, 2024.

D. D. Sari, “Analisa Postur Kerja Dengan Metode Rapid Entire Body Assessment ( REBA ) Pada Perkantoran SKK Migas,” Fak. Tek. Univ. Mercu Buana, vol. 4, pp. 1–68, 2018.

Berty Dwi Rahmawati and Eka Anggraini, “Analisis Postur Kerja Dengan Rapid Entire Body Assessment (REBA) Untuk Mengurangi Risiko Musculoskeletal Disorders,” Manufaktur Publ. Sub Rumpun Ilmu Keteknikan Ind., vol. 2, no. 3, pp. 09–21, 2024.

A. Pristianto and Y. N. Mawarni, “PROFIL MUSCULOSKELETAL DISORDERS (MSDs) PADA STAFF TENAGA KEPENDIDIKAN DI LINGKUNGAN UNIVERSITAS X,” Qual. J. Kesehat., vol. 18, no. 1, pp. 67–73, 2024.

B. Apriyan Trio Afandy, M. Sunaryo, H. Kirom Ramadhani, A. Rozzag Muizzu Cristyanto, M. Nourma Rhomadhoni, and P. Studi Keselamatan dan Kesehatan Kerja, “Gambaran Keluhan Musculoskeletal Disorders (MSDs) Pada Pekerja Manual Handling di UD. Griya Berkah,” J. Sains dan Teknol., vol. 5, no. 1, pp. 1–6, 2023.

R. T. A. Priangkoso, N. P. S. Putri, D. H. Wardhana, D. F. Andriansyah, A. M. F. Setyandi, and A. F. Rosyidiin, “Pengukuran Keluhan Musculoskeletal Pada Pekerja Kontraktor Menggunakan Metode Nbm Dan Rula.,” PROFISIENSI J. Progr. Stud. Tek. Ind., vol. 12, no. 1, pp. 071–080, 2024.

A. S. Prayoga and S. Nurrochmah, “Analisis antropometri tubuh dan tingkat kebugaran jasmani,” J. Porkes, vol. 7, no. 1, pp. 1–14, 2024.

Downloads

Published

2025-10-20

How to Cite

Sibarani, P. G., Wijayanto, D., & Batubara, H. (2025). Perbaikan Postur Kerja Karyawan di UMKM Hilwafa Menggunakan Metode REBA dengan Tools Nordic Body Map. Jurnal Teknik Industri Terintegrasi (JUTIN), 8(4), 4422–4433. https://doi.org/10.31004/jutin.v8i4.51217

Issue

Vol. 8 No. 4 (2025): October

Section

Articles of Research

License

Copyright (c) 2025 Perpetua Glenn Sibarani, Dedi Wijayanto, Hafzoh Batubara

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.