Penerapan BIM 3D pada Pekerjaan Struktur RSUD Dr. Iskak Tulungagung

Authors

  • Alung Nanda Permana Universitas 17 Agustus 1945 Surabaya
  • Bantot Sutriono Universitas 17 Agustus 1945 Surabaya
  • Michella Beatrix Universitas 17 Agustus 1945 Surabaya

DOI:

https://doi.org/10.31004/jutin.v8i4.50808

Keywords:

BIM 3D, Quantity Take Off, Autodesk Revit, BOQ, Pekerjaan Struktur, Structural Works

Abstract

Conventional Bill Of Quantity (BOQ) often faces inaccuracies in estimating structural work volumes due to limited detail and potential human error. This study aims to analyze the accuracy of quantity take off (QTO) using Building Information Modeling (BIM) through Autodesk Revit 2024 in the RSUD Dr. Iskak Tulungagung project. Research data included working drawings (shop drawings) and BOQ, which were modeled in 3D to generate structural work volumes from foundation to roof levels. The analysis revealed notable differences between the conventional method and Revit, with concrete volumes differing by 71.31 m3 or 9.46%, and reinforcement volumes differing by 267.981 kg or 4.51%. These findings confirm that Revit provides more detailed and consistent volume estimations, thereby enhancing project planning reliability while reducing manual calculation error.

References

Suwarni, A., & Anondho, B. (2021). Perbandingan Perhitungan Volume Kolom Beton Antara Building Information Modeling (Bim) Dengan Metode Konvensional. JUTEKS : Jurnal Teknik Sipil, 6(2), 75. https://doi.org/10.32511/juteks.v6i2.743

Farhana, A., & Abma, V. (2022). IMPLEMENTASI KONSEP BIM 5D PADA PEKERJAAN STRUKTUR PROYEK GEDUNG. Racic : Rab Construction Research, 7(2), 116–127. https://doi.org/10.36341/racic.v7i2.3004

Risky Apriansyah. (2021). Implementasi Konsep Building Information Modelling (BIM) Dalam Estimasi Quantity Take Off Material Pekerjaan Struktural. dspace.uii.ac.id.

Novita, R. D., & Pangestuti, E. K. (2021). Analisa Quantity Take Off Dan Rencana Anggaran Biaya Dengan Metode Building Information Modeling (BIM) Menggunakan Software Autodeks Revit 2019 (Studi Kasus: Gedung LP3 Universitas Negeri Semarang). Dinamika Teknik Sipil: Majalah Ilmiah Teknik Sipil, 14(1), 27–31. https://doi.org/10.23917/dts.v14i1.15276

Piaseckienė, G. (2022a). DIMENSIONS OF BIM IN LITERATURE: REVIEW AND ANALYSIS. Mokslas - Lietuvos ateitis, 14(0), 1–11. https://doi.org/10.3846/mla.2022.16071

Downloads

Published

2025-10-20

How to Cite

Permana, A. N., Sutriono, B., & Beatrix, M. (2025). Penerapan BIM 3D pada Pekerjaan Struktur RSUD Dr. Iskak Tulungagung. Jurnal Teknik Industri Terintegrasi (JUTIN), 8(4), 4345–4349. https://doi.org/10.31004/jutin.v8i4.50808

Issue

Vol. 8 No. 4 (2025): October

Section

Articles of Research

License

Copyright (c) 2025 Alung Nanda Permana, Bantot Sutriono, Michella Beatrix

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Similar Articles

1 2 3 > >> 

You may also start an advanced similarity search for this article.

Most read articles by the same author(s)