Otomatisasi Alat Sortir Ukuran Benih Kentang G - Nol Berbasis Load Cell
DOI:
https://doi.org/10.31004/jutin.v8i4.48991Keywords:
G-Nol potato seed, Automatic sorting, Load cell sensor, MPE, Financial feasibilityAbstract
This study aims to design an automatic seed sorting device for G-0 potato seeds using a load cell sensor as a solution to the limitations of manual sorting systems commonly used in the field. The system detects the seed weight through a load cell sensor connected to an Arduino microcontroller, enabling precise and automated sorting. The Exponential Comparison Method (MPE) was applied to evaluate four design alternatives based on functional, technical, and operational criteria. The results indicate that Design B is the most optimal, achieving the highest preference score. Financial feasibility analysis further supports the project's viability, with positive NPV, a high IRR, a B/C Ratio above 1, a short payback period, and a low break-even point. Therefore, the tool is considered feasible both technically and economically and shows strong potential for broader implementation in the agricultural sector.References
ASABE. (2021). Standar Pengukuran Manual pada Sistem Hortikultura. American Society of Agricultural and Biological Engineers.
Balai Penelitian Tanaman Sayuran. (n.d.). Pedoman Budidaya Benih Kentang G-0. Balitsa.
Hasibuan, A. A., & Ramadhan, I. (2020). Rancang Bangun Sistem Sortir Otomatis Berbasis Sensor Berat. Jurnal Teknik Elektro dan Komputer, 8(2), 145–152.
Isa, M., & Zuhriyah, A. (2021). Pengantar Ekonomi Investasi dan Risiko Usaha Kecil. Surabaya: CV Global Aksara Pers.
Khabibi, M., & Millaty, M. (2023). Studi Kelayakan Bisnis dan Implementasinya. Yogyakarta: Deepublish.
Kusumadewi, S. (2006). Fuzzy Multi-Attribute Decision Making. Yogyakarta: Graha Ilmu.
Lestari, D., Nugroho, A., & Farida, N. (2022). Pemilihan desain alat pengupas kopi berbasis metode MPE. Jurnal Rekayasa Pertanian, 10(2), 65-74.
Prasetyo, H., & Kurniawan, A. (2020). Rancang bangun alat sortir biji kakao berbasis Arduino dan sensor berat. Jurnal Teknologi Pertanian, 8(1), 12–18.
Rahmat, A., & Hermawan, R. (2018). Studi kelayakan ekonomi alat pemotong singkong otomatis. Jurnal Teknologi Agroindustri, 6(2), 55–61.
Saputra, R., & Fatimah, S. (2020). Analisis Pemilihan Alternatif Menggunakan Metode MPE. Jurnal Teknologi dan Sistem Komputer, 8(1), 35–42.
Setyaningsih, W., Astuti, S. P., & Hermawan, R. (2022). Analisis Kelayakan Finansial Proyek Investasi. Jakarta: Prenada Media.
Sudrajat, T., Wibowo, S., & Amelia, R. (2021). Efektivitas penggunaan load cell dalam sortir hasil panen hortikultura. Jurnal Mekanisasi Pertanian, 4(1), 22–29.
Sugiyono. (2019). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Bandung: Alfabeta.
Sunakalis, I., Wahyudin, R., & Lestari, R. (2022). Dasar-Dasar Evaluasi Proyek Investasi. Bandung: Pustaka Media Group.
Susanto, E. (2017). Pengambilan Keputusan Multikriteria dalam Sistem Informasi. Yogyakarta: Graha Ilmu.
Sutarya, D. (2019). Pengaruh Metode Sortasi Manual terhadap Mutu Benih Kentang. Jurnal Hortikultura Indonesia, 11(3), 187–194.
Syukur, M., Anwar, R., & Yuliana, N. (2014). Teknologi Perbanyakan Benih Kentang Bebas Virus. Bogor: IPB Press.
Suryadi, K., & Ramdhani, M. A. (2018). Pengambilan Keputusan Multikriteria. Bandung: Informatika.
Turban, E., & Aronson, J. E. (2005). Decision Support Systems and Intelligent Systems (7th ed.). New Jersey: Pearson Education.
Wicaksono, D., & Suryanto, H. (2020). Optimalisasi desain sistem irigasi otomatis menggunakan metode MPE. Jurnal Teknik Mesin, 14(3), 88–96.
Yuniar, D., & Widodo, A. (2021). Implementasi MPE dalam Pemilihan Desain Produk. Jurnal Teknik Industri, 13(2), 45–52.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Ayu Sri Anjani, Hasbi Hasidik Sihab, Intan Nurlaela, Muhammad Rusdan Fahmi, Rafika Ratik Srimurni, Iwan Satriyo Nugroho
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
