Analisis Risiko K3 Menggunakan Metode HIRADC dengan Pendekatan What-If Analysis pada Pekerjaan Blasting dan Painting di PT XYZ
DOI:
https://doi.org/10.31004/jutin.v8i4.48752Keywords:
HIRADC, What If Analysis, Blasting, Painting, Occupational Health and SafetyAbstract
Occupational Health and Safety (OHS) is a crucial aspect of the oil and gas industry due to the high potential for hazards arising from unsafe actions and unsafe conditions. This study aims to analyze OHS risks in blasting and painting activities at PT XYZ. The methods employed include HIRADC (Hazard Identification, Risk Assessment, and Determining Control) for hazard identification, and the What-If Analysis approach to evaluate various risk scenarios. Data were collected through field observations, interviews, questionnaires, and a review of company documents. The findings identified 30 potential hazards across four main activities, all of which were classified as having a moderate risk level. Following the implementation of risk control measures, all identified hazards were successfully reduced to low to moderate risk levels. These findings highlight the importance of continuous OHS system implementation to ensure workplace safety and operational sustainabilityReferences
Achamad Azhar Cholil, Sugeng Santaso, T Riza Syahrial, Erwin Sinulingga, Risa H Nasuation. Penerapan Metode HIRADC Sebagai Upaya Pencegahan Risiko Kecelakaan Kerja Pada Divisi Operasi Pembangkit Listrik Tenaga Uap, Jurnal Bisnis & Manajemen. 2020,2(2):41-64.
Ahmad Suyuda Akmal, Christopher Davito Prabandewa Hertadi. Analisis Risiko Proses Reaktivasi Unit Mechanichal Sampler Menggunakan Metode HIRADC. 2024 Dec,4 (1):620-628
Jasmina Vidi Quamilla, (2022). Penerapan Metode HIRADC Pada Fungsi Channel And Fleet Safety Sebagai Upaya Pengendalian Bahaya di PT Pertamina Patra Niaga Sub Holding Commmercial & Trading, [Laporan Magang]. Surabaya:Univeristas Airlangga;2022
Muhammad Bob Anthony. Analisis Risiko K3 Pada Pengoperasian. Overhead Crane Menggunakan Metode SWIFT (Structured What - If Technique) Di PT ABC. Jurnal Media Teknik & Sistem Industri. 2020,4(1):30-38.
Muhammad Dwiki Rivandi, Diana Puspita Sari. Penerapan HIRADC Sebagai Upaya Pencegahan Kecelakaan Pada Mesin WTM – 16 PT Bakerie Pipe Industries. 2024, 13(4):1-15
Standar Management Risk Australia / New Zealand 4360 : 20014.
Undang – Undang Republik Indonesia Nomor 01 Tahun 1970 Tentang Keselamatan Kesehatan Kerja (K3).
Prof. Dr. Ir. H. Djoko Setyo Widodo, SE., MM., MSi., CHRA., Ph.D. Keselamatan dan Kesehatan Kerja : Manajemen dan Implementasi K3 di Tempat Kerja. 2021
Tutut Nur Asih, Nina Aini Mahbubah, Muhammad Zainuddin Fathoni. Identifikasi Bahaya Dan Penilaian Risiko K3 Pada Proses Fabrikasi Dengan Menggunakan Metode HIRARC (Studi Kasus : PT. Ravana Jaya). Jurnal Sistem Dan Teknik Industri. 2024Oct;13(4):1.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Nurul Ain Syuhada, Lukman Lukman, Parji Parji
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
