Otomtisasi Perangkat Kelistrikan di Line Produksi Menggunakan Metode PDCA untuk Efisiensi Energi
DOI:
https://doi.org/10.31004/jutin.v8i3.48695Keywords:
Automation, Energy Efficiency, PDCA, Microcontroler, Manufacturing IndustryAbstract
Uncontrolled electricity usage in production facilities can lead to significant energy waste and high operational costs. This study designs an automation system to control lighting and ventilation based on work schedules to reduce inefficient energy use. The system is built using Arduino Uno microcontroller and RTC DS3231 module, and the development process is guided by the PDCA (Plan, Do, Check, Act) method to ensure a structured and evaluative approach. The results show that the system successfully reduced electricity usage by 1,991.01 kWh and saved IDR 2,228,854.90 monthly. The PDCA cycle also supported the system's refinement in a measured and gradual manner. This research proves that a simple but well-targeted automation system can significantly contribute to energy efficiency in manufacturing environments.References
Idris, R., & Lestari, E. (2017). Pengaruh Pengorganisasian Terhadap Peningkatan Mutu Pendidikan Di Sd Inpres Bangkala Ii Kota Makassar. Lentera Pendidikan : Jurnal Ilmu Tarbiyah Dan Keguruan, 20(1), 18–30. https://doi.org/10.24252/lp.2017v20n1a2
Khanafi, I., Salafuddin, S., Abidin, M. Y., & Khamidi, A. N. (2013). Persepsi dan Transformasi Visi dan Misi Pada Civitas Akademika Stain Pekalongan. Jurnal Penelitian, 6(2). https://doi.org/10.28918/jupe.v6i2.229
Kurnia, H., Jaqin, C., Hardi Purba, H., Kunci, K., Garmen, I., & Kaki, K. (2022). the Pdca Approach With Oee Methods for Increasing Productivity in the Garment Industry. Jurnal Ilmiah Teknik Industri, 10(1), 57–68.
Pratiwi, Y. E., & Sunarso, S. (2018). Peranan Musyawarah Mufakat (Bubalah) Dalam Membentuk Iklim Akademik Positif di Prodi PPKn FKIP Unila. Sosiohumaniora, 20(3), 199. https://doi.org/10.24198/sosiohumaniora.v20i3.16254
Setiawan, I., & Wiyatno, T. N. (2023). Analisis Faktor yang Menyebabkan Downtime pada Mesin Auto Front Wheel di Industri Otomotif. Waluyo Jatmiko Proceeding, 16(1), 461–470. https://doi.org/10.33005/wj.v16i1.68
Siroj, R. A., Afgani, W., Fatimah, Septaria, D., & Salsabila, G. Z. (2024). Metode Penelitian Kuantitatif Pendekatan Ilmiah untuk Analisis Data. Jurnal Review Pendidikan Dan Pengajaran, 7(3), 11279–11289.
Sudarmanto. (2018). Peranan Kepala Sekolah dalam Mewujudkan Visi Dan Misi Sekolah Menjadi Sebuah Aksi. Retrieved April 15, 2020, from https://cahaya-begawan.blogspot.com/2017/04/peranan-kepala-sekolah-dalam-mewujudkan.html
Wahyudin, W. (2018). Optimalisasi Peran Kepala Sekolah dalam Implementasi Kurikulum 2013. Jurnal Kependidikan, 6(2), 249–265. https://doi.org/10.24090/jk.v6i2.1932
Wulandari, R. Y. (2016). Implementasi supervisi manajerial pengawas sekolah dalam meningkatkan kompetensi pengelola perpustakaan. Manajer Pendidikan, 10(2).
Yanuar, R., & Putri, E. P. (2022). Pengendalian Kualitas dalam Upaya Menurunkan Produk Cacat dengan Metode PDCA (Studi Kasus di PT. XYZ). Industrika: Jurnal Ilmiah Teknik Industri, 7(1), 1–12. https://doi.org/10.37090/indstrk.v7i1.855
Yusutria, Y. (2018). Analisis Mutu Lembaga Pendidikan Berdasarkan Fungsi Manajemen di Pondok Pesantren Thawalib Padang Sumatera Barat. Ta’dib: Jurnal Pendidikan Islam, 7(2), 61–68. https://doi.org/10.29313/tjpi.v7i2.3833
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2025 Putra Junaedi, Arvita Emrilis Intani, Tri Ngudi Wiyatno
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
