Analisis Produktivitas Penjahit dengan Menggunakan Metode Work Sampling

Authors

  • Raodah Raodah Universitas Negeri Makassar
  • Ismail Aqsha Universitas Negeri Makassar
  • Baso Riadi Husda Universitas Negeri Makassar
  • Irin Ramdhani Universitas Negeri Makassar
  • Erniyani Erniyani Universitas Negeri Makassar

DOI:

https://doi.org/10.31004/jutin.v8i3.48400

Keywords:

Work Sampling, Productivity, Standard Time, Allowance

Abstract

Work sampling is a work measurement method to determine the proportion of time spent in various work system activities, either by humans, machines, or processes. This study identifies the proportion of productive and non-productive activities and determines the standard time as a basis for improving work effectiveness, especially in the activities of sewing operators. The work sampling method was used with 69 random observations over eight working hours of one operator. Analysis involved statistical calculation of proportion distribution, rating factor, allowance, as well as cycle, normal, and standard time. The results showed that 81,16% of the activities performed were productive with a standardized time of 179,79 minutes per work cycle. The idle time level was recorded at 18,84%. This finding indicates that the observed work system still leaves potential for improvement in unproductive time. The conclusion of this study emphasizes the importance of implementing work sampling as a method to design data-driven work system improvements, in order to increase overall work productivity and efficiency.

References

Cahyaningrum, D. T., Siswanto, N., & Firmanto, H. (2021). Penentuan Tenaga Kerja Optimal pada Packaging Kopi dengan Menggunakan Analisis Beban Kerja Metode Work Sampling. Jurnal Ilmiah Inovasi, 21(1), 46–49. https://doi.org/10.25047/jii.v21i1.2634

Fardila, D., & Adawyah, N. R. (2021). Optimasi Biaya dan Waktu Proyek Konstruksi dengan Lembur dan Penambahan Tenaga Kerja. INERSIA: LNformasi Dan Ekspose Hasil Riset Teknik SIpil Dan Arsitektur, 17(1), 35–46. https://doi.org/10.21831/inersia.v17i1.39499

Nafisa, L. (2022). Strategi Pengembangan Kualitas Jasa Jahit Pakaian Pada Persaingan Pasar Homogen. Jurnal Transparan STIE Yadika Bangil, 14(2), 1–8. https://doi.org/10.53567/jtsyb.v14i2.23

Nasution, Y. S. J., Syahriza, R., & Marliyah. (2020). Analisis partisipasi tenaga kerja perempuan dalam pemenuhan kesejahteraan keluarga di ptkin sesumatera. Kafa’ah: Journal of Gender Studies., 10(2), 145–158. http://kafaah.org/index.php/kafaah/index

Nurrohmat, A., & Lestari, R. (2021). Pengaruh Kepuasan Kerja terhadap Kinerja Karyawan. Jurnal Riset Akuntansi, 1(2), 82–85. https://doi.org/10.29313/jra.v1i2.419

Purba, R., Rusmewahni, R., & Damanik, S. W. H. (2021). Analisis Dampak Pengalaman Kerja Terhadap Produktivitas Kerja Karyawan Pt. Adira Finance Tebing Tinggi. Jurnal Muhammadiyah Manajemen Bisnis, 2(2), 109. https://doi.org/10.24853/jmmb.2.2.109-114.

Regina, S., Sutinah, E., & Agustina, N. (2021). Clustering Kualitas Kinerja Karyawan Pada Perusahaan Bahan Kimia Menggunakan Algoritma K-Means. Jurnal Media Informatika Budidarma, 5(2), 573. https://doi.org/10.30865/mib.v5i2.2909

Rumiyati, V. S. P., Putranto, A. P. E., & Wijayono, A. (2025). Studi Pengaruh Tetal Benang Pakan Dan Nomor Benang Pakan Terhadap Karakteristik Mutu Kekuatan Selip Jahitan Kain Denim Kapas 100%. CENDEKIA Jurnal Ilmu Pengetahuan, 5(2), 487-495. https://doi.org/10.51878/cendekia.v5i2.4682

Rustan, F. R., Soeparyanto, T. S., & Adyaksa, D. W. W. (2020). Produktivitas Kerja Pekerja Dalam Pemasangan Rangka Atap Baja Perumahan Ditinjau Dari Segi Labour Utilization Rate. FROPIL (Forum Profesional Teknik Sipil), 8(1), 17–24. https://doi.org/10.33019/fropil.v8i1.1719

Sakban, Nurmal, I., & Ridwan, R. bin. (2019). Manajemen Sumber Daya Manusia. Alignment: Journal of Administration and Educational Management, 2(1), 93–104.

Santoni, N. P. C. C., & Suana, I. W. (2018). Pengaruh Kompensasi, Motivasi, Disiplin Kerja Terhadap. E-Jurnal Manajemen Unud, 7(10), 5379–5406.

Septiani, N. U., & Nurbani, S. N. (2022). Penggunaan Metode Work Sampling untuk Menganalisis Produktivitas Tenaga Kerja Operator Sewing di CV ABC. Rekayasa Industri Dan Mesin (ReTIMS), 3(2), 71. https://doi.org/10.32897/retims.2022.3.2.1773

Suwanto, S., Kosasih, K., Nurjaya, N., Sunarsi, D., & Erlangga, H. (2021). Pengaruh Motivasi Dan Pengalaman Kerja Terhadap Produktivitas Karyawan Pada Happy Restaurant Di Bandung. Jurnal Ekonomi Efektif, 3(4), 546. https://doi.org/10.32493/jee.v3i4.11292

Warankiran, R. A. I., Dutolong, L. O. H., & Pandowo, M. H. C. (2021). Faktor - Faktor yang Mempengaruhi Produktivitas Kerja Karyawan Pada PT. Bank Sulutgo Cabang Utama di Manado. Jurnal EMBA: Jurnal Riset Ekonomi, Manajemen, Bisnis Dan Akuntansi, 9(4), 953–962.

Wulandari, A. A., Isabella, I., & Febriyanti, D. (2022). Implementasi Kebijakan Penanggulangan Bencana Kebakaran Hutan dan Lahan di Kabupaten Ogan Ilir Tahun 2019. JIAPI: Jurnal Ilmu Administrasi Dan Pemerintahan Indonesia, 3(2), 125–135. https://doi.org/10.33830/jiapi.v3i2.103

Downloads

Published

2025-07-15

How to Cite

Raodah, R., Aqsha, I., Husda, B. R., Ramdhani, I., & Erniyani, E. (2025). Analisis Produktivitas Penjahit dengan Menggunakan Metode Work Sampling. Jurnal Teknik Industri Terintegrasi (JUTIN), 8(3), 3202–3211. https://doi.org/10.31004/jutin.v8i3.48400

Issue

Vol. 8 No. 3 (2025): July

Section

Articles of Research

License

Copyright (c) 2025 Raodah Raodah, Ismail Aqsha, Baso Riadi Husda, Irin Ramdhani, Erniyani Erniyani

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.